Can’t tell for sure what you mean, but maybe try changing the Use new style save dialog… setting to its opposite state in Settings (menu) -> Preferences… -> Default Directory (box on left).

OK, I guess I figur out your problem:
Your %appdata%\notepad++\functionList.xml is the old one which doesn’t match anymore to the new binary.

In order to remedy your problem, you need:

1. Installer the new version
2. Close Notepad++
3. Remove %appdata%\notepad++\functionList.xml
4. Relaunch Notepad++, and launch Function list

Notepad++ will copy a new functionList.xml from your Notepad++ installation location to %appdata%\notepad++\, and new copied functionList.xml is matched to the new version of binary.

Please let me know if it does work for you.

In 7.5.7 when I open .js files the function list does not work (stays empty). In 7.5.6 the problem does not occur.

Could you provide more detail (the js file, for example) please?
I cannot reproduce it.

I just notice the same “bug” too. The function list for .js file is empty. (i just update to 7.5.7)

It does work for me (v7.5.7, 32 bits). Could you provide your js file?

Hi there,

Thanks for Notepad++ and for the new version.
This seems to be a new bug:
In 7.5.7 when I open .js files the function list does not work (stays empty). In 7.5.6 the problem does not occur.

Thank you,
Wouter

I just notice the same “bug” too. The function list for .js file is empty. (i just update to 7.5.7)

in the Mark panel, …the In-selection option is available. So, we may highlight…a subset of the current file…and navigate between all the matches of this subset with … Ctrl+0 and Ctrl+Shift+0

As @Claudia-Frank pointed out (can’t find the thread right now), this is the best Notepad++ can currently do for a glaringly missing “Find All in Selection” feature. But I don’t think she brought up navigating those matches with the keycombos, so to that I say “Nice one!”

I think you’re putting too many conditions on the “new rule”. It is certainly true the way you stated it, but…

Here’s how it works when a selection is active: Find will start at the highest position of the main selection (there could be more than one selection in the case of “Multi-Editing” being enabled)–and we’re not talking rectangular selections right now) and will start looking beyond that position (forward-direction search) or behind that position (backward-direction search) when Find-Next is pressed. In the case of a rectangular selection, it doesn’t necessarily use the main selection–the selection of the line the caret is on–but rather uses the highest position of all of the selections. (I should add that in a rectangular selection, there are actually n selections, one for each of n lines making up the rectangle.)

In the specific case of a select-all having been done previously, for a forward, non-wrapping search, there is indeed no range to search, so it is impossible to find a match for anything (of non-zero length…adding that qualifier for the regex gurus…).

Note: “position” may be a term that is exposed more by Scintilla / Pythonscript – it may not generally be known to Notepad++ users…but it can be thought of as the index into the buffer of the individual characters…the first character is at position 0, the 2nd at 1, etc.

Ah, Scott, I’ve never noticed this interesting point, indeed ! So, again, a new rule to remember :

When, both, the Backwark direction and the Wrap around options are unset in the Find or Replace dialog AND if a “Select-all” operation ( Ctrl + A ) has been done, any search is irrelevant, as there is no search range at all !!

Not related with this post but I noticed, when doing tests in the Mark panel, that the In selection option is available. So, we may highlight/bookmark a subset of the current file, only, and navigate between all the matches, of this subset, with the Ctrl + 0 and Ctrl + Shift + 0 shortcuts ;-))

Best Regards,

guy038

It all works fine for me. Can’t really tell what you are doing exactly, though, in order to comment further.

…EXCEPT for this case, because you have the screenshot of that one:

Then I tried selecting all the text and finding the word, no luck again.

What is going on in this case is that the search is starting right AFTER the lower end of the selection. And since you are searching in the forward-direction (Backward direction not ticked) and you aren’t wrapping the search at end-of-file (Wrap around not ticked), the expected result is no hit for your search–by doing a select-all before the search you basically gave it no range to search!

You can verify this by making the following selection and conducting the same search, and observing that it will “hit” on the Fix on line 11 (bullet point 9 in the change.log):

I searched for a word the normal way, no luck.
Then I tried selecting all the text and finding the word, no luck again.
The find on the Replace tab doesn’t work.
The new find » button doesn’t work either.
The count button works
The Find All in Current Document works

I use this feature a lot in Notepad++.
For now, I’ll roll back to an earlier version.

When I encounter the simple done well, I pause - reflect and say, thank you.
So, thank you again, for your ongoing efforts to make such an amazing text editor.

with a handshake,
Joe

Find Feature Error

OK, Helen. Some of my questions don’t have an answer, yet, but I understood that you would like to use the HTML entities !

The Horizontal Ellipsis, of Unicode value 2026, can be written as an HTML entity, with these 3 syntaxes :

… or … ( Decimal value ) or … ( Hexadecimal value )

So, here are, below, some regex S/R, in order to change any Horizontal Ellipsis into its appropriate HTML entity :

• Open the Replace dialog ( Ctrl + H )

• Select the Regular expression search mode ( IMPORTANT )

• Tick the Wrap around option

• In the Find what: zone, type in \x{2026} OR … ( The ellipsis itself ! )

• In the Replace with: zone, type in … OR … OR …

• Click on the Replace All button

=> Every occurrence of the horizontal ellipsis character will be changed into its HTML entity

Note : The different HTML entities of characters, with Unicode value between \x{2000} and \x{206F}, can be found from that link :

https://www.w3schools.com/charsets/ref_utf_punctuation.asp

Now, you could be interested by the HTMLTag N++ plugin, which can encode character to its appropriate HTML entity and vice-versa ! So :

• Downloaded the HTMLTag_plugin_v1.0.0_unicode.zip OR the HTMLTag_plugin_1.0.0_64.zip archive from the link below :

https://sourceforge.net/projects/npp-plugins/files/HTMLTag/HTMLTag plugin v1.0.0

• Close Notepad++

• Extract the contents of the archive in the %AppData%\Notepad\plugins folder of your configuration

• Restart Notepad++

• Now, use the menu option Plugins > HTML Tag > Encode entities, or the Ctrl + E shortcut, to change the selected … into …

• And use the menu option Plugins > HTML Tag > Decode entities, or the Ctrl + Shift + E shortcut, to change the selected … OR … OR … HTML entity into the Horizontal Ellipsis …

Best Regards,

guy038

P.S. :

In case your text contains three consecutive full stop ( ... ) as an approximation of the Horizontal ellipsis character, you can search then :

• In Regular expression search mode , with the syntaxes \.\.\. OR \Q...\E

• In Normal search mode , with the simple syntax ...

If you don’t mind, some questions, first :

• What was your previous N++ version ? I suppose that your downloaded one is the latest ( v7.5.7. ) ?

• Probably, when mentioning ellipses, you’re speaking about the horizontal ellipsis ( of Unicode value \x{2026}). Refer below :

http://www.unicode.org/charts/PDF/U2000.pdf

• Could you provide the Debug Info information ( Menu ? > Debug Info... )

( BTW, it’s funny to see that, in all software, a sub-dialog/window is, generally, announced with 3 dots as, for instance, File > Print... instead of the syntax File > Print… ! )

• Which is the current encoding of the file, where you want to replace ellipses with usual dots ? ( Have a look to the right part of the status bar, downwards )

• Is the ellipsis character correctly displayed or do you see a white or black square or a question mark, meaning that you current font cannot display its glyph, properly ?

• Why do you need to do such search/replacement ?

See you later,

Best Regards,

guy038

I just installed 32-bit 7.5.7 on Win7 Pro, and it reliably crashes when closing the last file or the app itself, and randomly at other times (but also when opening or closing files). This is entirely atypical for this great product. I will try downgrading to the previous version and see what happens.

Downgrading to 7.7.6 removed this annoying tendency to crash - it must be something you guys did in 7.5.7. I will stay with 7.5.6 for now.

Anyway, thanks for the great work!

Thanks for Notepad++ and for the new version.
This seems to be a new bug:
In 7.5.7 when I open .js files the function list does not work (stays empty). In 7.5.6 the problem does not occur.

Thank you,
Wouter