Notepad++ v6.9.1 is out there

Sergey Den

I have the same problem:
when I download the file using NppFTP, the encoding has changed from UTF-8 to ANSI, and the EOF also change from “UNIX” (default in my Npp configuration), to “Dos/Windows”.

Paul Robertson

Claudia,
I have tried both using the pull down menu and the shortcut sequence. Neither has an effect. A search for multiple instances in a file also does not result in the window opening at the bottom as I expect. It appears the result window is never created.
R/ Paul

Paul Robertson

@Claudia-Frank
I have found a “solution” in another site which addressed this same issue. It mentioned the config.xml file in the \user"account"\Appdata\roaming\notepad++ folder as being the culprit. I renamed this file, restarted the application and the behavior went back to normal.
Regards/Paul

Peter McIlroy

Any chance of bringing back the online documentation? All links appear dead.

Claudia Frank

Hello @Paul-Robertson,

good to see that you found the cause of your issue.
By any chance, can you compare the “renamed” config.xml with the new one created,
to see what the differences are?

It happened already a couple of times where unexpected behavior was solved by deleting/renaming
%APPDATA% directory or config files. So I’m curious to see what could have caused it.

Thank you and cheers
Claudia

Paul Robertson

@Claudia-Frank
I can provide a beyond-compare output file if you tell me how to deliver it to you.

Claudia Frank

@Paul-Robertson

If you don’t mind you could upload it to https://dropfile.to/ and post the link here.
It stays there for at most 24 hours and then gets deleted automatically.

Cheers
Claudia

Roger Tannous

Hello,

While closing Notepad++ I’m now forced to close/save/discard one of many unsaved files (like for example new 5).

I used to be able to close Notepad++ and leave unsaved files and restore everything back as I left them when I closed the app!

This feels to be a bug because Notepad++ is forcing only one of the unsaved files to be closed/saved/discarded.

Claudia Frank

Hello @Roger-Tannous,
looks like automatic backup is disabled.

Please check the following

Settings->Preferences->Backup
check remember current session for next launch
check enable session snapshot and periodic backup

Cheers
Claudia

Roger Tannous

@Claudia-Frank

I had version 6.9, so the complaint concerns that version. Yes, I have those check boxes checked, but it doesn’t matter, I just updated to 6.9.1 and till now, there’s no problem.

Chenfeng Bao

Very very happy to see Fortran free format support.
However, the changelog writes “FORTRAN 77", which is actually fixed format. It should be “Fortran 90” (not all CAPS) or newer.

Chenfeng Bao

More on Fortran:
the old fixed-form FORTRAN highlight is now broken. All Fortran source files are now highlighted in free format style.

Chenfeng Bao

So sorry… old fixed form FORTRAN highlighting was not working for me because my cloud settings folder was not updated. The configuration files in the install folder are correctly setup. Once I copied these files, fixed-form FORTRAN highlighting works properly.

About default extensions:
by most common convention, “.f” is used for fixed-form FORTRAN, not free format.

David Rocco

I continue to obtain this problems… if i use FTP access and download some file for edit (like a txt file or xml) from a server if this same files it’s changed on server i don’t obtain the ask for reload and if i reload manually i don’t see the modification.
For obtain i need to re-download the file… this functions it’s very usefull when you stay to read, for example, a log file from a server… if you want to read you need every time to redownload the file.

I have also tryed to use Filezilla or use the FTP plugins of notepad++… please fix.

Claudia Frank

Hello @David-Rocco,

ftp protocol doesn’t provide any “file has changed functionality”
If the file has been changed on the server you won’t get any information,
if you would like to have such functionality you need to use something like samba.
(assuming the server is a unix host)
Basically, you need to mount the share to your filesystem so that the filesystem
gets a chance to detect file changes.

Cheers
Claudia

Anirudh Aima

v6.9.1 crashes some times. It erases the file that I am coding on.It has happend quite a few times now…please fix this bug immediately as i love coding on notepad++

Frank Théo

Hi!
I just upgraded to 6.9.1 and noticed the following new behaviour:

Open several files (2 for this test) in Notepad++
Close Notepad++ without closing the files.
Rename only one of the files.
Open Notepad++
Notice that the renamed file is not available in the open tabs, except the other file.

Before the upgrade, there was a window displayed at launchtime, asking if the file that is no longer available should be kept in Notepad++ or removed.

In 6.9.1, the window does not appears anymore.

Is there an option to recover this feature or is this per design ?

Thanks for any suggestion.

guy038

Hello Frank,

I’ve just done a test with 4 versions of N++ :

v6.9.1 Unicode
v6.7.7 Unicode
v6.4.5 Unicode
v5.9.8. Ansi

All of them behave the same way, as for the renaming of a file, previously opened in N++

Indeed, if you haven’t closed N++ yet, then, as soon as you rename, from OUTSIDE N++, a file , which is presently opened in N++, a pop-up window appears, saying :

The file " C:\.............." doesn't exist anymore.

Keep this file in editor?

    Yes          No

But, referring to your point #2, once N++.exe is CLOSED, how Notepad++ could know, that you modified a file, in the meantime, although it was previously opened in N++ ??!!. For the four versions tested, the tab, of the renamed file, has logically disappeared !

To my mind, as the file, with its previous name, doesn’t exist any more, the N++'s reference to that file is wrong, by now and N++ can’t open it, in a tab !

Best Regards

guy038

Frank Théo

Hi @guy038! Thanks for your reply and the testing.

However, after further tests, a similar expected behaviour could be reproduced by modifying one of file at step #1 without saving the changes.

Close N++. Rename (or Delete !!) the file you changed. Open N++. The file is still displayed in the same state as it was when closing N++.

– At this stage, I think that this behavior for unsaved files is important, useful and should never be reconsidered :) I was rather worried about these unsaved changes than about reopening deleted (but saved) files.

I had the feeling that this was the case before the update, so I was wondering if it changed some settings that I have not seen in the preferences. (This is technically possible with a cache, I do not expect that N++ find the renamed file by itself, but load it from the cache instead, like with an FTP and partially with the unsaved changes to the files).

Anyway, the last update works like a charm! Thanks again for your time, and thanks to N++ team/contributors who are doing a really great job.

Cheers
Frank

pfisherduke

BUG: Network Drives and Files are no longer visible after upgrading to 6.9.1 (cannot open any network file)

I tried uninstalling and reinstalling but that did not work. I created a post for this under the Help Wanted forum but I’ll paste the message here as well: https://notepad-plus-plus.org/community/topic/11694/network-drives-no-longer-work-with-6-9-1-update

Network Drives are no longer visible in the File Open view nor any other view I can think of to try opening files (eg New Workspace/Open Session). I had previously been using Notepad++ version 6.8 and was able to open files on my defined network drives without any problem.

I also tried getting the Explorer plugin but that couldn’t see the network drives either
I confirmed the drives are online and I can access + open the files from Windows Explorer
I also tried toggling on the “Show Hidden Files” but that didn’t work either.
I tried setting the program to always open in Administrator mode but that didn’t change anything
I tried uninstalling the most recent version and re-installing it to a new directory (I think it may have kept some of my App Data, not sure though)

There was a similar topic 6 months ago where the “solution” was to uninstall, manually remove all registry entries for NP++, then reinstall but that sounds like a pain for most users to do: https://notepad-plus-plus.org/community/topic/10791/notepad-v6-8-6-fails-to-open-files-from-shared-network-drives
Since that solution is outside the scope of what most users may know how to do, I think this should be considered a bug and fixed in the next dot release.

Any other suggestions?

Thanks!
Pete