Preview Plugin
-
It is necessary to contact the author of this plugin, that he himself would correct the project for 64 bit.
-
you did not just try to compile PreviewHTML for x64 …
YOU HAVE SUCCESSFULLY COMPILED PreviewHTML for x64 !!!i think the missing PreviewHTML toolbar icon on x64 is no big deal, as users can use [ctrl]+[shift]+[h] to switch PreviewHTML on and off.
this is very cool … it’s andrecool-68 ;-)
thanks for sharing. -
@Meta-Chuh
I sometimes compile other people’s plugins for the sake of experiment with Russian localization, but I am very far from this programming))) -
It is necessary to contact the author of this plugin
You mean like this ticket, which the author has had open since July of 2017?
According to the code history, the author has touched the codebase since the ticket was placed (and since I commented on that ticket), but there has not yet been a 64-bit release.
While waiting for that, I created my pyscfilteredviewer. It’s not quite as integrated as the PreviewHTML plugin, nor quite as automated (it uses your default browser; it cannot update based on the edited-but-not-saved, and it cannot force your browser to refresh), but for me, it’s a viable workaround until such time as PreviewHTML is released 64-bit.
I just pinged that ticket again, since it had been more than a year since my last ping. Maybe if everyone in this thread pinged it, too, it might get done.
-
Maybe if everyone in this thread pinged it, too, it might get done.
As an addendum: @andrecool-68 : since you were able to compile it 64-bit, your input for the developer would probably go a long way! Please chime in on that ticket! 🙏
-
@PeterJones said:
You mean like this ticket, which the author has had open since July of 2017?
Honestly, I have not seen this page)))
I just downloaded the sources and compiled the project by adding the option 64 bits to the properties of the project. -
@andrecool-68 said:
I just downloaded the sources and compiled the project by adding the option 64 bits to the properties of the project.
Well then, plesae add a note to the ticket that tells the author how easy it is, in your experience. 🙏
-
does the x64 version that @andrecool-68 compiled, not suffice the current needs ?
is the missing toolbar button really that important ?
or have i missed something while i was testing ? -
Some IT groups block such a URL.
Also, for helping others, I don’t really like saying “go to this official location to download the 32-bit; but to get the 64-bit, you have to go to this other file-hosting URL”
-
I was able to get a copy. It crashes my Notepad++ when I try to run it.
Notepad++ v7.6.3 (64-bit) Build time : Jan 27 2019 - 17:16:47 Path : C:\usr\local\apps\notepad++\notepad++.exe Admin mode : OFF Local Conf mode : ON OS : Windows 10 (64-bit) Plugins : ComparePlugin.dll DSpellCheck.dll MarkdownViewerPlusPlus.dll mimeTools.dll NppConverter.dll NppExec.dll NppFTP.dll PreviewHTML.dll PythonScript.dll XMLTools.dll -
@PeterJones
It’s better for me to use a browser than with a similar plugin, in the browser it is very convenient to edit styles. And immediately visible results. All of these plugins work as a help file on the core of Internet Explorer))) -
Also, for helping others, I don’t really like saying “go to this official location to download the 32-bit; but to get the 64-bit, you have to go to this other file-hosting URL”
correct, i just meant for or our own usage, or if someone wants to experiment on it.
if it will become of larger interest, and the author does not continue his development, someone could host it at github, some day, or fork the entire project.I was able to get a copy. It crashes my Notepad++ when I try to run it.
i did not experience any crashes yet, and it seems to run fine.
just an access violation alert if i click on the?or chooseaboutfrom the plugin’s menu. (see screenshot)
i will test on other machines and windows 10 later if you like.
most important, if someone might worry:
here are the virus total results:
(it’s completely clean)file name: PreviewHTML.dll
scan result: https://www.virustotal.com/#/file/52d281942a5b47b54f62a70c2233da9a564184db25e2a73721b1ba491f9b97cc/detection
detection: 0/67 -
Added compression UPX
Preview HTML 64bit http://rgho.st/6YCkZxbL2Anyway an error pops up in the About Preview HTML window:
Access violation at address 0000000004BB01B0 in module 'PreviewHTML.dll'. Read of address 0000000000000010.When building 32 bit of this error is not, the icon in the menu is present.
-
The author recommends the version of Delphi 10.2 Tokyo
I have installed Delphi 10.1 Berlin …Could this be the cause of this error? -
I’m not a delphi developer but in general a issue which happens
in a 64bit build but doesn’t occur in a 32bit build might be a integer size problem
especially when something like access violation comes into place.Might I ask why not using a real browser instead? I mean, a real browser
supports so much more than an ancient html plugin can offer in these days.
I assume it is something obvious which I haven’t understood yet. :-) -
ahhh, you haven’t followed this.
yes, a browser is better, @andrecool-68 has already said that, but he started to play around with it, compiling it to x64, and then we got to know that @PeterJones is also using this plugin … so here we are. 😉
note: the o.p. is already satisfied as he installed and uses notepad++ 32 bit now.
-
you’re right :-) - some kind of tldr :-D
But I don’t get what the benefit is?
Does this plugin update while you are coding a html page?
Or just after pressing save file? If the latter is the case then a macro/script
which does save/file - run in browser might do the same, doesn’t it? -
loooool … tltr … coming from your turbo fingers 😉
Does this plugin update while you are coding a html page?
Or just after pressing save file? If the latter is the case then a macro/script
which does save/file - run in browser might do the same, doesn’t it?not even one of this.
somehow the o.p. wanted specifically this plugin.
it does not auto refresh.
it does not make a live preview, the data has to be saved first.
if you save, it does not trigger a refresh.
so it’s pretty crude for an integrated plugin, imho.but for me it’s nice to see, that things that we don’t need at all, can become a playground.
maybe this is the same for andre, and that’s why he compiled something he would probably never use himself. -
coming from your turbo fingers
LOOL - seems they need to get adjusted (like tyres :-D)
It’s always nice to have something to play with :-D now I get it :-D
But I read @PeterJones comment in the ticket and he seems to be eager to use it
Maybe he can enlight me what he is using it for ;-) -
@Ekopalypse said:
But I read @PeterJones comment in the ticket and he seems to be eager to use it
Maybe he can enlight me what he is using it for ;-)From what I remembered, the PreviewHTML plugin is slightly more live than “on-save”; I think it can update every 15s or something like that. And definitely if you hit refresh. (I hit
Ctrl+S– save early, save often! – often enough that I usually don’t notice a difference in timing).I like it because it’s bundled close to the editing window, and I don’t have to click to a different window (either in another monitor, or a window buried beneath Notepad++) to refresh the browser’s preview. It allows filtering of all sorts of files (like markdown or Perl POD, etc – whatever you define a filter for) into HTML, which then gets renders in the PreviewHTML sub-window.
In fact, that filter-to-HTML-with-on-save-preview was what prompted me to write pyscFilteredViewer, because while I don’t edit much HTML, I am frequently playing with the POD in my Perl, and having the nearly-live preview is nice.
