Plugins not installing



  • @Ilia-Ternovich

    unfortunately you have to set your proxy manually in notepad++.

    • first open notepad++ as administrator:
      right click on your notepad++ desktop icon and choose ‘run as administrator’.
      note: if you don’t have a desktop icon in windows 10, click on the windows icon, to open up the start menu, then find and right click on your notepad++ icon and select more > run as administrator.

    • go to the notepad++ menu ? > set updater proxy as seen at the screenshots below.

    Imgur

    • enter your proxy ip and port, press ok. then close and re-open notepad++ for the changes to take effect.

    Imgur

    note: if you are behind a corporate url filter too, make sure that your firewall allows direct downloads from the urls listed >>> here <<< (mainly github and sourceforge).

    best regards.



  • @Meta-Chuh

    Is there a way, without installing any plugins or updating N++, to test that Notepad++ has these proxy settings correct and can do something with them in the future, after you set them up? Maybe a dumb question…



  • @Alan-Kilborn

    this is a good and important question, thanks.

    yes, you can test your proxy settings:
    to test the proxy settings, go to the notepad++ menu ? > update notepad++.
    if the proxy settings do not work, you will get a curl error message alert window, like failed to connect to [proxy ip] port [proxy port]: timed out.



  • @Meta-Chuh

    if the proxy settings do not work, you will get a curl error message alert window, like failed to connect to [proxy ip] port [proxy port]: timed out

    Or perhaps one like this:

    Imgur



  • @Alan-Kilborn

    yes.
    this would be the worst error message, as 407 means, that the proxy requires authentication.

    unfortunately proxy authentication is not supported in notepad++.

    many thanks for your example.



  • @Meta-Chuh said:

    proxy authentication is not supported in notepad++.

    So one that gets that would have to install plugins manually if they want them. Is there a concise procedure for that (install manually) to document or linkto here, since we’ve started the ball rolling in this thread for proxy problems…?



  • @Alan-Kilborn

    Is there a concise procedure for that (install manually) to document or linkto here, since we’ve started the ball rolling in this thread for proxy problems…?

    unfortunately not.
    i guess none of us has had the time to make a general guide for manual plugin installations.
    we currently only have our specific guides for past user requests, dealing with specific plugins.

    but yes, we should do that.



  • @Meta-Chuh

    Well, I didn’t mean anything particularly polished. ;)

    It seems like PluginsAdmin must have a list of where to go to get the plugins. Someone could visually look at the list to figure out where to go to manually get a plugin…?

    As a recent arrival to 7.6.x, why is this better than the PluginManager days? (No such proxy issues back then) :)



  • @Alan-Kilborn

    all plugin links are publicly available at the plugins admin’s json lists:

    64 bit plugins: https://github.com/notepad-plus-plus/nppPluginList/raw/master/src/pl.x64.json

    32 bit plugins: https://github.com/notepad-plus-plus/nppPluginList/raw/master/src/pl.x86.json

    installation should be fairly easy, as we have the plugins > open plugins folder... menu now, but i fear that the json list itself will be too hard to read for non power users.

    maybe you have an idea how we could make a general manual plugin installation guide which is simple to read, but yet suitable for newer users.



  • @Meta-Chuh said:

    publicly available at the plugins admin’s json lists

    Ah, yes, this is what I was thinking of. Thx.



  • Hi, @meta-chuh, @alan-kilborn and All,

    UPDATED on 05 11 2019 : Because, it’s not possible to, directly, paste multi-lines text, from browser to the N++ Replace dialog !!


    Here is, below, a quick way to get two neat lists of the plugins, from the pl.x86.json and pl.x64.json files ! With regexes, of course ;-))

    • Start Notepad++

    • Disable the wrap text feature ( => un-tick the View > Word wrap option )

    • Open an new tab ( Ctrl + N )

    • Paste the appropriate json file in this new tab

    • Copy a normal selection of all the multi-lines search regex, below :

    (?x-is)                                   #  FREE-SPACING mode, search SENSITIVE to case, DOT = a SINGLE STANDARD char, ONLY
    ^(  \h*  \{  |  \h*\},\h*\{  |  \}  )  |  #  [ BLANK chars ] + ( '{' or '},  {' ) or LAST '}' changed into 121 DASHES
    ^\h*  "npp-plugins"  .+  \r\n          |  #  Line  containing "npp-plugins" DELETED
    ^\h*  (  \},?  |  ]  )  \r\n          |  #  Lines containing '},' or '}' or ']', at END of line, DELETED
    ^\h+"  ( arch )                        |  #  BLANK chars + string '"arch'             changed into 'Architecture'
    (32|64)",$                             |  #  Strings '32",' / '64",' at END of line,  changed into '32 bits' / '64 bits'
    ^\h+"  ( id )                          |  #  BLANK chars + string '"id'               changed into 'SHA-256'
    ^\h+"  ( repository )                  |  #  BLANK chars + string '"repository'       changed into 'Download'
    ^\h+"  (.)                             |  #  FIRST LOWER-case letter, after leading BLANK chars in UPPER-case
    (":[ ]")                               |  #  String '": "' changed into 11 SPACE characters + ':' + 1 SPACE character
    ",?$                                      #  DOUBLE quote or string '",' , at END of line , DELETED
    
    • Now, open an second N++ new tab ( Ctrl + N )

    • Paste the search regex in that second tab

    • Do a normal selection of all this search regex, copied

    • Open the Replace dialog ( Ctrl + H )

    => The Search what : zone should be, automatically, filled up, with the search regex

    • Then, paste the single-line replace regex, below, directly, in the Replace with : zone, of the Replace dialog
    (?3Architecture)(?4\4\x20bits)(?5SHA-256)(?6Download)(?7\u\7)(?8\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\:\x20)((?1-------------------------------------------------------------------------------------------------------------------------)
    
    • Tick, preferably, the Wrap around option

    • Select the Regular expression search mode

    • Move back on the tab, containing the json file

    • Click, once, on the Replace All button ( about 1s )


    To end with, we just need to align the colon character, in all lines. Quite easy with this final regex S/R :

    • Paste the line, below, directly, in the Find what : zone
    (?x-s)  ^  .{13}  \K  [ ]+  #  All CONSECUTIVE SPACE characters, after the FIRST 13th characters, are DELETED
    
    • Leave the Replace with : zone EMPTY

    • Click, once, on the Replace All button

    Et voilà !

    What’s your feeling about it ? Isn’t it more pleasant to study ?!

    Best Regards,

    guy038



  • @Meta-Chuh , @Alan-Kilborn and all

    I wrote a script to download a specific Notepad++ plugin.

    The script displays a numbered list of all plugins available through the latest Notepad++ plugins list on GitHub. The user can select one of these plugins by entering its number to download and unpack the plugin to the hard disk.

    It is possible to provide the architecture of Notepad++ and, if required, a proxy address as arguments. It is also possible to append the architecture of Notepad++ to the filename of the script, e.g. LoadNppPlugin_x86 for 32 bit Notepad++ and LoadNppPlugin_x64 for 64 bit Notepad++.

    You can download a ZIP package with all required files from my >>> Script Collection Repository <<<. Also have a look at its description at the main page of the repo.



  • @pnedev OK, that helped, and I can now install plugins.

    But it’s still not quite right. Instead of NP++ restarting, it opens the <Program FIles>/Notepad++ folder in Windows Explorer. When I manually start NP++, the selected plugins are there.

    There are some I really miss, though, like TakeNotes



  • @Keith-Collyer

    it opens the <Program FIles>/Notepad++ folder in Windows Explorer.

    i’m still figuring out what could cause this.
    usually updater\GUP.exe should be started at that point, but if it would be missing, the plugins admin menu gets disabled automatically, so it shouldn’t happen at all.

    are you eventually using the old plugins manager, which is not compatible with newer versions, like 7.6.6, to install plugins ?

    please test the following, to verify, if a clean notepad++ would restart after plugins admin installs, instead of opening explorer on your system.

    • download the notepad++ 7.6.6. portable version from >>> here <<<.
      (the portable version does not require any installation and runs completely independent and isolated from your installed version. all custom settings, as well as any stuff you might want to try at the portable version, will not modify your installed version)

    • extract npp.7.6.6.bin.zip to e.g. your desktop.

    • important note: make sure to close all instances of notepad++ that might be running, before starting the portable version at the next step, to make sure you are using this portable version.

    • open the extracted npp.7.6.6.bin folder and start this portable version by double-clicking on notepad++.exe inside this folder.
      (note: notepad++.exe will just be seen as notepad++, if you have enabled to hide all known file extensions at your explorer settings)

    • install any plugins at this portable version using plugins > plugins admin and tell us what you see.

    many thanks and best regards.



  • @guy038 :

    Sadly I could not get your regex technique to work. Maybe I do something wrong?

    I clicked @Meta-Chuh 's link for 32-bit json and my browser took me here:

    https://raw.githubusercontent.com/notepad-plus-plus/nppPluginList/master/src/pl.x86.json

    I pressed ctrl+a (in the brower) and all the text I was seeing was highlighted. I copied it and pasted into a fresh N++ editing tab. (I see tab characters!)

    I tried the Find regex you presented, exactly, and even tried removing all the extra, thus I tried this too:

    (?-is)^(\h*\{|\h*\},\h*\{|\})^\h*"npp-plugins".+\r\n^\h*(\},?|])\r\n^\h+"(arch)(32|64)",$^\h+"(id)^\h+"(repository)^\h+"(.)(":[]")",?$

    but alas I got no matches found. Maybe there is something wrong with my technique. I ask you instead of diving in myself because that is a fairly ambitious regex. :)



  • Hi, @alan-kilborn, and All,

    Did you notice that I’ve updated my previous post ? Indeed, I realized that you cannot paste, directly, multi-lignes code, from black NodeBB areas, into the Find what : of the Find/Replace dialog :-((

    Practically, you need to :

    • Firstly, paste that multi-lines selection on a N++ new tab

    • Secondly, re-select that selection

    • Thirdly, open the Find/Replace dialog !

    => The search regex should be , automatically, filled up in the Find what : zone ;-))


    Alan, concerning your one-line regex, obtained from my multi-lines regex, you just forgot all the alternation symbols (| ) of the overall regex, which are located before the # character which begins comments :-))

    So the one-line version of the two regex S/R, described in my previous post, are :

    • First regex S/R :

      • SEARCH (?-is)^(\h*\{|\h*\},\h*\{|\})|^\h*"npp-plugins".+\R|^\h*(\},?|])\R|^\h+"(arch)|(32|64)",$|^\h+"(id)|^\h+"(repository)|^\h+"(.)|(": ")|",?$

      • REPLACE (?3Architecture)(?4\4\x20bits)(?5SHA-256)(?6Download)(?7\u\7)(?8\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\:\x20)((?1-------------------------------------------------------------------------------------------------------------------------)

    • Second regex S/R :

      • SEARCH (?-s)^.{13}\K\x20+

      • REPLACE Leave EMPTY


    Here is a reminder of the characteristics of “Free-spacing” mode (?x) :

    In this mode :

    • All inserted space characters are NOT considered. So, when a regex must search for an effective space character, 3 solutions are possible :

      • Escape each space character by the exhaust character \

      • Replace each space character with the syntax [ ]

      • Replace each space character with the syntax \x20

    • All characters placed after a 1st character #, are NOT considered. So, when a regex must search for an effective # character, 3 solutions are possible :

      • Escape each # character by the exhaust character \

      • Replace each # character with the syntax [#]

      • Replace each # character with the syntax \x23

    • Finally, due to a bug in the regex BOOST version 1.5.5 library, currently used in Notepad++, each syntax \R MUST be replaced by the equivalent syntax \r\n ( or \n if you are processing Unix files )


    This mode allows you to build a complex regular expression in several lines, with comments. A simple example :

    (?x)    #  "Free-spacing" mode
    (?-s)   #  The DOT représents a SINGLE STANDARD character, ONLY
    [ ]*    #  An area, even NULL, of SPACE character(s)
    \#      #  A SINGLE # character
    .*      #  An area, even NULL, of STANDARD character(s)
    \r\n    #  The TWO Windows EOL characters
    

    If you select all this block to copy it into the search area leaving the replacement area empty, this regex deletes all the commented parts of a Python script !

    Best Regards,

    guy038



  • @guy038

    i was able to use your first, unedited regex, but i also fail to find any matches with your edited version.

    SEARCH (?-is)^(\h*\{|\h*\},\h*\{|\})|^\h*"npp-plugins".+\R|^\h*(\},?|])\R|^\h+"(arch)|(32|64)",$|^\h+"(id)|^\h+"(repository)|^\h+"(.)|(": ")|",?$
    does not find any matches on https://raw.githubusercontent.com/notepad-plus-plus/nppPluginList/master/src/pl.x86.json
    (version 1.0.9)



  • Hi, @meta-chuh, @alan-kilborn and All,

    As, seemingly, there are, at least, two links from where we can download the pl.x86.json and pl.x64.json

    https://github.com/notepad-plus-plus/nppPluginList/raw/master/src/pl.x86.json

    https://raw.githubusercontent.com/notepad-plus-plus/nppPluginList/master/src/pl.x86.json

    I compared the two files and … they are quite identical !

    Secondly, I selected and pasted your regex and compared with my FIRST search regex, using the Find dialog, with the Normal mode, and the Match case option ticked

    And, again, the two regexes were identical !

    So,… I really don’t understand why, you and Alan, cannot get it to match ???


    For instance, after running the FISRT regex S/R :

    • SEARCH (?-is)^(\h*\{|\h*\},\h*\{|\})|^\h*"npp-plugins".+\R|^\h*(\},?|])\R|^\h+"(arch)|(32|64)",$|^\h+"(id)|^\h+"(repository)|^\h+"(.)|(": ")|",?$

    • REPLACE (?3Architecture)(?4\4\x20bits)(?5SHA-256)(?6Download)(?7\u\7)(?8\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\:\x20)((?1-------------------------------------------------------------------------------------------------------------------------)

    The beginning and end of the pl.x86.json file is changed as below :

    -------------------------------------------------------------------------------------------------------------------------
    Name           : npp-pluginList
    Version           : 1.0.9
    Architecture           : 32 bits
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name           : 3P
    Display-name           : 3P - Progress Programmers Pal
    Version           : 1.8.4
    SHA-256           : c26d0cbde59688501f683e2ac4a8b5a2d5327b13e14f0be1e6cf6abb9059f401
    Download           : https://github.com/jcaillon/3P/releases/download/v1.8.4/3P.zip
    Description           : [Requires .net framework 4.6.1]\r\n3P is a notepad++ plug-in designed to help writing OpenEdge ABL (formerly known as Progress 4GL) code. It provides :\r\n- a powerful auto-completion\r\n- tool-tips on every words\r\n- a code explorer to quickly navigate through your code\r\n- a file explorer to easily access all your sources\r\n- the ability to run/compile and even PROLINT your source file with an in-line visualization of errors\r\n- more than 50 options to better suit your needs\r\n- and so much more!\r\nVisit http://jcaillon.github.io/3P/ for more details on the plugin
    Author           : Julien Caillon
    Homepage           : https://jcaillon.github.io/3P/
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name           : ActiveX
    Display-name           : ActiveX Plugin
    Version           : 1.1.7.3
    SHA-256           : c89214e3bcf05abb6b81626e766b009027202eee14cd88dcd3ed0843adfe40e7
    Download           : https://sourceforge.net/projects/nppactivexplugin/files/bin/ActiveX_Unicode_1_1_7_3.zip
    Description           : This plugin allows you to control Notepad++ via ActiveX.\r\nYou can use ActiveX with many scripting languages (VBScript, JScript, PHP, ...) and other languages (C++, C+, VB.NET, Delphi, ...).\r\nSo you are not bound to a single language.
    Author           : Bananen-Joe
    Homepage           : https://sourceforge.net/projects/nppactivexplugin/
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name           : AnalysePlugin
    Display-name           : AnalysePlugin
    Version           : 1.11.37.0
    SHA-256           : 6ca78ed2ae93f594cc0f057deb31d4b4b6f932b6e2368347e0cd91730e2a1e39
    Download           : https://downloads.sourceforge.net/project/analyseplugin/binaries/v01.11-R37-x86.zip
    Description           : AnalysePlugin will help you to search for more than one search pattern at a time. Great for analysing log files..\r\nLast changes and How to use you will find in Help... in Plugins Menu.
    Author           : Mattes H.
    Homepage           : https://sourceforge.net/projects/analyseplugin
    -------------------------------------------------------------------------------------------------------------------------
    ..............
    ..............
    ..............
    ..............
    ..............
    ..............
    ..............
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name           : XPatherizerNPP
    Display-name           : XPatherizerNPP
    Version           : 2.10
    SHA-256           : 92e8393a2bf94b27a8084d8d84734616a56ea51f877bf5cc62b6d494642e76b5
    Download           : https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/xpatherizernpp/XPatherizerNPP-2.10.zip
    Description           : Analyze multiple XPath queries with reverse lookup\nFeatures:\nAnalyze multiple XPath queries with one keypress.\nAbility to only search on selected text.\nAbility to Auto Search as you type your xPath queries. \nReverse lookup from results.\nBeautify XML documents.\nSaved queries for files left open in NPP.\nCan save and load XML files with XPath queries into a single file.\nSelect multiple results nodes for exporting.\nExport results to new XML file.\nRemove results from the XML document. \nCan display information about Attributes on the Parent node results.
    Author           : bguenthner
    Homepage           : https://code.google.com/p/xpatherizernpp/
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name           : ZenCoding-Python
    Display-name           : Zen Coding - Python
    Version           : 0.7.0.1
    SHA-256           : a781ee5c76ebc543b412a41e024c2d96f9a6edcae591f27868e190a48bc7bba6
    Download           : https://downloads.sourceforge.net/project/npppythonscript/ZenCoding-Python/ZenCoding-Python-0.7.0.1a.zip
    Description           : An implementation of the Zen Coding method by Sergey Chikuyonok. Expand HTML, CSS, XML, XSLT and XSD from abbreviations\ntr#head1.header&gt;td*2 becomes &lt;tr id=\"head1\" class=\"header\"&gt;\n  &lt;td&gt;&lt;/td&gt;\n  &lt;td&gt;&lt;/td&gt;\n&lt;/tr&gt;\nUses the Python Script plugin.
    Author           : Dave Brotherstone
    Homepage           : https://github.com/bruderstein/ZenCoding-Python
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name           : zoomdisabler
    Display-name           : Zoom Disabler
    Version           : 1.2.0
    SHA-256           : eb49c4fce581fa63b024a3a0454ccc49d082b9524c0cc9a0d5c25544e264da55
    Download           : https://github.com/StanDog/npp-zoomdisabler/raw/master/RELEASES/zoomdisabler_1.2.0.zip
    Description           : Worried about zooming your document everytime you just want to scroll but accidentally still holding the [Ctrl] key? Then this plugin is what you want! It disables mouse zoom or keyboard zoom or both.
    Author           : Stanislav Eckert
    Homepage           : https://github.com/StanDog/npp-zoomdisabler
    -------------------------------------------------------------------------------------------------------------------------
    

    And, after running the SECOND regex S/R :

    • SEARCH (?-s)^.{13}\K\x20+

    • REPLACE Leave EMPTY

    The beginning and end of the pl.x86.json file is nicely changed as below :

    -------------------------------------------------------------------------------------------------------------------------
    Name         : npp-pluginList
    Version      : 1.0.9
    Architecture : 32 bits
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name  : 3P
    Display-name : 3P - Progress Programmers Pal
    Version      : 1.8.4
    SHA-256      : c26d0cbde59688501f683e2ac4a8b5a2d5327b13e14f0be1e6cf6abb9059f401
    Download     : https://github.com/jcaillon/3P/releases/download/v1.8.4/3P.zip
    Description  : [Requires .net framework 4.6.1]\r\n3P is a notepad++ plug-in designed to help writing OpenEdge ABL (formerly known as Progress 4GL) code. It provides :\r\n- a powerful auto-completion\r\n- tool-tips on every words\r\n- a code explorer to quickly navigate through your code\r\n- a file explorer to easily access all your sources\r\n- the ability to run/compile and even PROLINT your source file with an in-line visualization of errors\r\n- more than 50 options to better suit your needs\r\n- and so much more!\r\nVisit http://jcaillon.github.io/3P/ for more details on the plugin
    Author       : Julien Caillon
    Homepage     : https://jcaillon.github.io/3P/
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name  : ActiveX
    Display-name : ActiveX Plugin
    Version      : 1.1.7.3
    SHA-256      : c89214e3bcf05abb6b81626e766b009027202eee14cd88dcd3ed0843adfe40e7
    Download     : https://sourceforge.net/projects/nppactivexplugin/files/bin/ActiveX_Unicode_1_1_7_3.zip
    Description  : This plugin allows you to control Notepad++ via ActiveX.\r\nYou can use ActiveX with many scripting languages (VBScript, JScript, PHP, ...) and other languages (C++, C+, VB.NET, Delphi, ...).\r\nSo you are not bound to a single language.
    Author       : Bananen-Joe
    Homepage     : https://sourceforge.net/projects/nppactivexplugin/
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name  : AnalysePlugin
    Display-name : AnalysePlugin
    Version      : 1.11.37.0
    SHA-256      : 6ca78ed2ae93f594cc0f057deb31d4b4b6f932b6e2368347e0cd91730e2a1e39
    Download     : https://downloads.sourceforge.net/project/analyseplugin/binaries/v01.11-R37-x86.zip
    Description  : AnalysePlugin will help you to search for more than one search pattern at a time. Great for analysing log files..\r\nLast changes and How to use you will find in Help... in Plugins Menu.
    Author       : Mattes H.
    Homepage     : https://sourceforge.net/projects/analyseplugin
    -------------------------------------------------------------------------------------------------------------------------
    ..............
    ..............
    ..............
    ..............
    ..............
    ..............
    ..............
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name  : XPatherizerNPP
    Display-name : XPatherizerNPP
    Version      : 2.10
    SHA-256      : 92e8393a2bf94b27a8084d8d84734616a56ea51f877bf5cc62b6d494642e76b5
    Download     : https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/xpatherizernpp/XPatherizerNPP-2.10.zip
    Description  : Analyze multiple XPath queries with reverse lookup\nFeatures:\nAnalyze multiple XPath queries with one keypress.\nAbility to only search on selected text.\nAbility to Auto Search as you type your xPath queries. \nReverse lookup from results.\nBeautify XML documents.\nSaved queries for files left open in NPP.\nCan save and load XML files with XPath queries into a single file.\nSelect multiple results nodes for exporting.\nExport results to new XML file.\nRemove results from the XML document. \nCan display information about Attributes on the Parent node results.
    Author       : bguenthner
    Homepage     : https://code.google.com/p/xpatherizernpp/
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name  : ZenCoding-Python
    Display-name : Zen Coding - Python
    Version      : 0.7.0.1
    SHA-256      : a781ee5c76ebc543b412a41e024c2d96f9a6edcae591f27868e190a48bc7bba6
    Download     : https://downloads.sourceforge.net/project/npppythonscript/ZenCoding-Python/ZenCoding-Python-0.7.0.1a.zip
    Description  : An implementation of the Zen Coding method by Sergey Chikuyonok. Expand HTML, CSS, XML, XSLT and XSD from abbreviations\ntr#head1.header&gt;td*2 becomes &lt;tr id=\"head1\" class=\"header\"&gt;\n  &lt;td&gt;&lt;/td&gt;\n  &lt;td&gt;&lt;/td&gt;\n&lt;/tr&gt;\nUses the Python Script plugin.
    Author       : Dave Brotherstone
    Homepage     : https://github.com/bruderstein/ZenCoding-Python
    -------------------------------------------------------------------------------------------------------------------------
    Folder-name  : zoomdisabler
    Display-name : Zoom Disabler
    Version      : 1.2.0
    SHA-256      : eb49c4fce581fa63b024a3a0454ccc49d082b9524c0cc9a0d5c25544e264da55
    Download     : https://github.com/StanDog/npp-zoomdisabler/raw/master/RELEASES/zoomdisabler_1.2.0.zip
    Description  : Worried about zooming your document everytime you just want to scroll but accidentally still holding the [Ctrl] key? Then this plugin is what you want! It disables mouse zoom or keyboard zoom or both.
    Author       : Stanislav Eckert
    Homepage     : https://github.com/StanDog/npp-zoomdisabler
    -------------------------------------------------------------------------------------------------------------------------
    

    To end, Meta, you said :

    i was able to use your first, unedited regex, but i also fail to find any matches with your edited version.

    It not clear for me ! What do you mean by unedited and edited versions ?

    Cheers,

    guy038



  • @guy038

    oooops, i was on 7.7 debug without boost while i was testing what alan said, that’s why it didn’t work for me.

    works as expected in 7.6.6, just like the first time i’ve tested it.

    my sincere apologies 🙏

    (i will start using different coloured themes for different versions while testing, to avoid this in the future)



  • @guy038 :

    I as well got it working now, both with the free-spacing regex and the non. Not sure what the problems were earlier, EXCEPT I do realize now that I didn’t keep the | characters for some oddball reason.

    BTW, I dislike vertical alignment of anything but comment-to-eol. A personal preference.

    Thx, @guy038, this will come in handy for us that do manual plugin installs.


Log in to reply