delete line between bookmark



  • @pinuzzu99 said in delete line between bookmark:

    how to? apart begin/end select…

    If you asking, how can you manually select a LOT of text without having to hold shift+(caret motion key) or click+drag with the mouse, well, there is a way. The Edit menu has a Begin / End Select command. Navigate to where you want to start your select, execute that command once. Now, navigate to where you want to end your selection, perhaps via a search (because remember your ending text is FAR AWAY from your starting point), and then execute the Begin / End Select command a second time. When you do that, all text between your remembered starting point and the current caret position will become selected, for copying/deleting/moving/whatever.



  • i know Begin/End Select…
    i search an alternative way…
    and bookmark, as has the function delete lines, I’d like to have a function that eliminates lines within a certain range.
    precisely if I only had 2 bookmarks I would like to be able to eliminate this range.
    I found a regex that eliminates a predefined range of lines (10-100-xxxx) but that’s not what I’m looking for, because my ranges vary in number.



  • Hello, @pinuzzu99, @alan-kilborn All,

    Based on the regexes given in the post, below :

    https://community.notepad-plus-plus.org/post/50272

    I think that the similar regex S/R, below, should do the job !

    SEARCH (?-s)^(?!.+@).*\R?

    REPLACE Leave EMPTY

    Notes :

    • The first part (?-s) is an in-line modifier, which means that any regex dot symbol ( . ) matches a single standard character

    • Then the (?!.+@) is a negative look-ahead structure , which means that , from beginning of line, any non-null range of chars till a @ symbol must not exist.

    • If it’s the case ( So, a line without an e-mail address ! ) the final part .*\R? matches any range, even null, of chars, from beginning of line, followed with its possible line-break

    • As the replacement field is empty, any line, not containing a @ symbol, is then deleted !


    However, @pinuzzu99, it would be good if you follow Alan’s advice and try to learn, at least, the basics of regular expressions!

    No doubt, you will make big mistakes at first, but little by little, you will understand their syntax and find a particular regular expression for each specific problem. Believe me, after a certain point, you won’t go back ;-))

    Best Regards,

    guy038



  • @pinuzzu99 said in delete line between bookmark:

    I’d like to have a function that eliminates lines within a certain range.

    If you’re willing to use the Pythonscript plugin, here is a script that will do such a thing:

    # -*- coding: utf-8 -*-
    
    from Npp import editor, notepad
    
    def main():
    
        user_input = ''
        while True:
            user_input = notepad.prompt('Enter first line # of range to delete:', '', user_input)
            if user_input == None: return  # user pressed Cancel
            try:
                if user_input.lower() == 'bof': user_input = 1
                elif user_input.lower() == 'eof': user_input = editor.getLineCount()
                line1 = int(user_input)
                if not (1 <= line1 <= editor.getLineCount()): raise ValueError
            except ValueError:
                continue
            break
        user_input = ''
        while True:
            user_input = notepad.prompt('Enter last line # of range to delete:', '', user_input)
            if user_input == None: return  # user pressed Cancel
            try:
                if user_input.lower() == 'bof': user_input = 1
                elif user_input.lower() == 'eof': user_input = editor.getLineCount()
                line2 = int(user_input)
                if not (1 <= line2 <= editor.getLineCount()): raise ValueError
            except ValueError:
                continue
            break
        line1 -= 1; line2 -= 1  # convert "user" line numbers to "system" line numbers
        if line1 > line2: (line1, line2) = (line2, line1)
        start_pos = editor.positionFromLine(line1)
        end_pos = editor.positionFromLine(line2) + len(editor.getLine(line2))
        editor.beginUndoAction()
        editor.deleteRange(start_pos, end_pos - start_pos)
        editor.endUndoAction()
    
    main()
    
    

    In addition to using integer line numbers at the prompts, you can also use BOF for beginning-of-file and/or EOF for end-of-file.



  • @guy038 tanxs for your reply, always highly appreciated!
    but your string with replace, delete only one line at time; with replace all delete all line.
    this is another specific case, similar but different from the post you indicated above…
    here I want to delete only a range of lines, between 2 emails, but only that, not all lines on my txt. I need to see what they contain first, then delete that range, but only that, not all on only one shot.
    I need a function like Begin/End Select, but with this function to put an End to the selection I have to scroll all the lines to the bottom, and sometimes I have intervals of even 10,000 lines…
    so I need a command that, given the first few lines, if I consider it ok, I want to delete them all but only until the next email. I need a command to delete lines INCLUDED in 2 emails. only those, not all.

    @ Alan
    tanxs also for your suggestion. now i try it.



  • Alan, please, explain me how to work.
    installed python plugin, copy your script and saved into plug folder on python, i don’t understand ho to insert range into script.
    see my shot above, i need delete line between 10-28

    alt text



  • @pinuzzu99

    Hmmmmmm, well, first, you don’t need the boomarks. I’m not sure if you put them in just for running the script, or if they were just already there.

    Second, you have to read the prompt on the box: Enter first line # of range to delete: where, for your example, you would enter 10:

    a5154e5b-d45c-4bde-9abf-f17d904af261-image.png

    When you say OK to that, it will ask you for the last line, where you would enter 28:

    117b228e-ca0a-4d4d-85af-b79156847b13-image.png

    When you do that and press OK, it will then delete your range of lines, including the first and last (10 and 28 in this example will be gone after the final OK, as well as all lines in between).

    You can press Cancel in either box to abort everything.

    Did I really make it that hard to understand??

    Sure, it could all be combined into one box, but then one has to think more about what to put in a single input box. The way I did it, you just follow the prompts.

    By the way, your first line could have been 28 and your last line 10 and it would have worked the same way.



  • Hindsight looking at the script:

    Where I call the lower function on the user_input variable probably isn’t the best place for it. They won’t fail with a ValueError and thus probably shouldn’t be part of that block. But the script DOES work as written (AFAICT), so I won’t provide a changed version.



  • @pinuzzu99, @alan-kilborn All,

    Sorry, I did not understand your need, correctly ! Indeed, you simply want, from a line, containing an e-mail address, delete all subsequent lines till the next line containing an e-mail address, excluded, don’t you ?

    If so :

    • Move to the line right after a line containing an e-mail address

      • Manually

      • Using the regex (?-s).+@.+\R\K, which places the caret at beginning of any line right after an e-mail address

    • Now, use the following regex S/R to delete all lines till the next e-mail address line

      • SEARCH (?s).+?(?=(?-s)^.+@)

      • REPLACE Leave EMPTY

    Note : I gave it a try, with 30,000 random lines between two lines containing an e-mail address and it correctly selected all this stuff in between and deleted it ;-))

    Best Regards,

    guy038



  • tanxs Alan, this was what i wanted!
    and the bookmarks were only to make it clear the range i wanted to eliminate…

    @guy038
    tanxs for your reply. but i was hoping it could be done in one step…
    anyway work well, always thanks for your appreciated help!



  • @pinuzzu99 said in delete line between bookmark:

    but i was hoping it could be done in one step

    This implies that it is something you do often, so it might be worth recording multiple steps into a “macro” that you keep. This thread talks more about that.

    Script notes: Using bof doesn’t make much sense – it is always going to be line 1 so why not just use 1? Also, I’ve thought of some extensions to the script. I could see myself using the script often. I’ll posts an enhanced version soon!



  • tanxs for your explanation on macros.
    but, if i understand correctly, if i record a macro, for example by deleting lines 10 to 20, this macro always repeats the same procedure…
    I instead have different txt, in which the lines to be deleted are always different…
    so i think in my specific case the elimination steps have to be done manually.
    is this correct?



  • @guy038
    also your string work, but this delete all line, including line which contains the email…
    instead i want delete the lines under the email, but leave this …



  • @pinuzzu99

    I thought we were talking about several replacement operations when I brought up recording in macros. Other operations don’t lend themselves so well to “macroization”.



  • Hello, @pinuzzu99 and All,

    You said in a previous post :

    also your string work, but this delete all line, including line which contains the email…
    instead i want delete the lines under the email, but leave this …

    My method does not delete any -mail address, assuming that you put the caret at the beginning of the first line, right after the line containing this e-mail address !

    Consider the input text :

    ....
    ....
    ....
    jasortrtn25hoon@hotmail.com:bartrall2335
    2017-07-08 12.35.03_5.jpg                         			32KB			             08/07/2017 19:34:57
    2017-07-08 12.35.03_8.jpg                         			71KB			             08/07/2017 19:34:57
    2017-07-08 12.35.10_4.jpg                         			70KB			             08/07/2017 19:35:04
    2017-07-08 12.48.43_15.jpg                        			84KB			             08/07/2017 19:48:41
    2017-07-25 01.22.59.jpg                           			102KB			            25/07/2017 08:22:59
    ======================================
    skysfsfff@gmail.cam:ksddsfdsfy37
    ....
    ....
    ....
    
    • If you run the search regex (?-s).+@.+\R\K, the caret should have moved at the beginning of the line 2017-07-08 12.35.03_5.jpg, with the calltip ^zero length match

    • Then, after running the search regex (?s).+?(?=(?-s)^.+@) all the lines, after the jasortrtn25hoon@hotmail.com, till the second e-mail address skysfsfff@gmail.cam excluded, should have been selected, then deleted after replacement !


    But, may be, you’ll prefer this other method, which need one operation, only !

    • Move , first, to a line containing an e-mail address, if necessary. Note that the caret can be at any position in that line, with an e-mail address !

    • Then, use the following regex S/R to delete all lines, after this 1st e-mail address till the next e-mail address, excluded

    SEARCH (?-s).*\R\K(?s:.+?)(?=^.+@)

    REPLACE Leave EMPTY

    Cheers,

    guy038



  • with first string work fine, but at one specific account all text it is selected, then deleted! but only in a specific case, maybe it contains characters that other accounts don’t contain …
    try with this txt: https://www.upload.ee/files/11106151/try_this.txt.html

    so, second string work, select all line that I want to eliminate, but then with the replace the lines are not deleted!
    i have record my screen, see video here: https://www.upload.ee/files/11106092/video_02.mp4.html
    maybe i do something wrong…



  • @pinuzzu99 and All,

    Oh… I forgot to mention that you need to use the Replace All button , only. Do not use the Replace button which does not act as it should, when the regex contain any \K syntax. This is a general rule, available for any regex containing, at least, one \K syntax

    Best Regards,

    guy038



  • yes i know, Replace All and i have try it before my post above, but as i said, i want check all my single block one by one before delete all lines.
    for my purpose work fine this: (?-s).*\R(?s:.+?)(?=^.+@)
    without \K and work with Replace, but on next block i need to put cursor at begin line under mail line…
    this is little problem if my txt have 10,000 block of mail - file list…



  • in this specific case string (?-s).*\R(?s:.+?)(?=^.+@) don’t find value…
    why? what is different than other blocks?

    earlnathanieluhftr@gmail.com:natchel7634
    Used: 3/50GB
    Physiology                                        			0KB
    Internal Med                                      			0KB
    Passwords.zip                                     			370KB
    Lippincott Illustrated Reviews Flash Cards Physiology - Preston, Robin [SRG].pdf			42137KB			          08/09/2015 17:46:42
    Ganongs Review of Medical Physiology,  24E (2012) [UnitedVRG].pdf			80607KB			          08/09/2015 17:46:36
    Kaplan USMLE Step 1 Physiology Lecture Notes (2013) [PDF] [UnitedVRG].pdf			25312KB			          08/09/2015 12:50:40
    


  • @pinuzzu99 said in delete line between bookmark:

    i want check all my single block one by one before delete all lines.

    But as @guy038 said, that expression won’t work in one-at-a-time mode. Continuing to try is an exercise in futility.

    If you are uncertain whether the regex will meet all your needs, and you want to be able to compare the “before” and “after” states of your file, I recommend opening the original file blah.txt, File > Save copy as, give it a name like blah_new.txt, then open blah_new.txt and move to other view – so that the two panes of Notepad++ are blah.txt on the left and blah_new.txt on the right, then run Guy’s regex on the blah_new.txt, then use the Compare plugin (which you can install from the Plugins Admin) to find and easily navigate through the differences between the files, and make sure everything is the way you want it. If they are all right, great; if most are right and just a couple aren’t quite right, then manually fix those last few; if there are many wrong, then run Undo, and try to update the regex to better do what you want. Once you are happy with blah_new.txt, you can delete the original blah.txt (or rename to blah_old.txt, then rename blah_new.txt to blah.txt.

    (Or, you can start by copying blah.txt to blah_old.txt, and have blah_old.txt on the left and blah.txt on the right, doing all your edits to blah.txt, and eliminating the extra renames at the end of the procedure.)


Log in to reply