Notepad++ v7.9.3 Released



  • @Timo-Moisio-0 said in Notepad++ v7.9.3 Released:

    Viallisen moduulin nimi: ntdll.dll, versio: 10.0.19041.789, aikaleima: 0xe8ba8c09

    What’s your debug info please?



  • @donho

    I noticed later that it was the same issue with NppSaveAsAdmin plugin as reported earlier.
    That plugin was used on the second computer.
    After I removed it, there was no problem.



  • V7.9.1 is better than V7.9.2/V.7.9.3



  • I found a bug which was also in 7.9.2
    Open a text file, mark a column with multiple rows and press tab.
    The Col: xx value isn’t updated.



  • @Tragen
    I am not quite sure I understand your problem.
    Can you explain with an example what you do and what you expect?



  • @Tragen said in Notepad++ v7.9.3 Released:

    found a bug which was also in 7.9.2
    Open a text file, mark a column with multiple rows and press tab.
    The Col: xx value isn’t updated.

    This behavior exists in all prior versions I checked (I spot checked back a few years).

    Really, Ln and Col are only meaningful when NOT in column mode. To convince yourself of this, what should Ln say when you have a column mode block active and your block spans lines 3 thru 10?

    I suppose Col could have a fixed value if the column block has zero-width (your case) and the carets (yes there are more than 1 in col mode) are all in the same column.



  • @Alan-Kilborn

    aah - it is about the statusbar and the Col field, thx for clarification.



  • Zen Coding is not working



  • Notepad++ 7.9.3 fails to start after install. Window Event Viewer contains the following relevant entry:

    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
     <System>
      <Provider Name="Application Error" /> 
      <EventID Qualifiers="0">1000</EventID> 
      <Version>0</Version> 
      <Level>2</Level> 
      <Task>100</Task> 
      <Opcode>0</Opcode> 
      <Keywords>0x80000000000000</Keywords> 
      <TimeCreated SystemTime="2021-02-18T19:50:40.9870900Z" /> 
      <EventRecordID>41177</EventRecordID> 
      <Correlation /> 
      <Execution ProcessID="0" ThreadID="0" /> 
      <Channel>Application</Channel> 
      <Computer>CC04C-MPMP10T7.moody.edu</Computer> 
      <Security /> 
     </System>
     <EventData>
      <Data>notepad++.exe</Data> 
      <Data>7.9.3.0</Data> 
      <Data>60288871</Data> 
      <Data>ntdll.dll</Data> 
      <Data>10.0.19041.662</Data> 
      <Data>27bfa5f0</Data> 
      <Data>c0000005</Data> 
      <Data>000000000004b401</Data> 
      <Data>22f0</Data> 
      <Data>01d7062f55c8c738</Data> 
      <Data>C:\Program Files\Notepad++\notepad++.exe</Data> 
      <Data>C:\WINDOWS\SYSTEM32\ntdll.dll</Data> 
      <Data>4146dfc2-fe6f-4392-83e9-c0a818129564</Data> 
      <Data /> 
      <Data /> 
     </EventData>
    </Event>
    

    Reverting to 7.9.1 based upon other comments found in this thread.



  • @David-Michael-Paxton updating: This is installed on Windows 10 Pro 20H2. Originally attempted upgrade of NPP 7.8.9. After initial failure, uninstalled and reinstalled 7.9.3 fresh, which still failed to start. Same symptoms as @László-Botka



  • @David-Michael-Paxton ,

    Same symptoms as @László-Botka

    Does that mean that you also have NppSaveAsAdmin plugin, too? If so issue #9514 is looking into it – and you can choose whether to downgrade to v7.9.1 or whether to disable that plugin until a fix is available.

    If you don’t have that plugin, please let us know what plugins you do have.



  • Did clean install on Windows 10 1809 and it failed to start. Clean install on my 20H2 started just fine.

    Unfortunately don’t currently have access to 1809 device to get logs from Event Viewer.



  • By the way, you can temproarily workaround the problem with NppSaveAsAsmin by installing an older version of this plugin as it was suggested here https://github.com/Hsilgos/nppsaveasadmin/issues/24#issuecomment-781994249



    1. I recently installed NPP793 portable and attempted to install the Quicktext 021 plugin using the Plugins Admin. The install starts but then it errors out with this message npp_quicktext.png

    2. I tried manually installing it but after placing the unzipped folder (with associated files) for QT021 in the plugins folder, and following advice in the CHANGELOG notes, copied QuickText.ini to the plugins/config/ folder. It was not recognized by NPP793. Unfortunately the README notes for QT021 has conflicting information (versus CHANGELOG) about the location of the DLL and the INI. In any case following the instructions in either does not work. As far as I can tell the support for QT021 has long since disappeared.

    While I can do nothing to fix 1) above, is there anything I am doing wrong in 2)? or is there a newer alternative to Quicktext 021?



  • @Michael-Shulist said in Notepad++ v7.9.3 Released:

    tried manually installing it but after placing the unzipped folder (with associated files) for QT021 in the plugins folder,

    You need a QuickText subdirectory.

    plugins/QuickText/QuickText.dll

    Cheers.



  • Hi all, first at all thanks for this great software I’m using from many many years.
    Upgrading from 7.9.2 to 7.9.3 it breaks my dual-monitor experience:
    https://community.notepad-plus-plus.org/topic/20774/dual-monitor-with-different-resolutions-didn-t-scale-well-with-latest-7-9-3
    I hope this help



  • @Michael-Vincent, I suppose I should have laid out all I did, so here goes:

    1. I placed the unzipped QuickText folder in the plugins directory
    • result = nothing
    1. Per the README:
    Just copy the QuickText.dll into Notepad++'s plugin directory
    , and the QuickText.ini file into Notepad++'s directory.
    
    • result = nothing
    1. Following the notes in the CHANGELOG (and removed 2)):
    Moved QuickText.ini from \QuickText.ini to \plugins\Config\QuickText.ini
    
    • result = nothing.
    1. I should note that there are two DLLs in the QuickText folder, QuickText.ANSI.dll & QuickText.UNI.dll. So I removed each of those separately and tested to see if anything changed.
    • result = nothing

    I’d certainly be grateful if anyone had other useful suggestions. I got very used to having QuickText in prior versions (latest was 7.8.5) and it would be great to get it working again.



  • @Michael-Shulist said in Notepad++ v7.9.3 Released:

    I should note that there are two DLLs in the QuickText folder, QuickText.ANSI.dll & QuickText.UNI.dll. So I removed each of those separately and tested to see if anything changed.

    Seems you’re using a very dated version of QuickText, though you were using my updated one.

    You can forget ANSI, Notepad++ does not support ANSI plugins anymore. Generically, your DLL name (minus the .dll extension) must match the containing folder in the plugins/ folder.

    SO:

    plugins/QuickText/QuickText.dll
    plugins/QuickText.UNI/QuickText.UNI.dll
    plugins/MyWeirdPluginName/MyWeirdPluginName.dll

    Hope helps clarify.

    Cheers.



  • @Michael-Vincent Ok I think I’ve done it.
    Originally I had used the Quicktext version in my prior installation but updated it to release QT0211 for use in NPP793, however it was from this repo.
    Following your advice I managed to get it properly installed and running. I did stumble across a few minor issues in the repo instructions which I will update at some point.
    Thank you for your help and suggestions.



  • @Michael-Vincent Also if it this is the repo that NPP793 uses in the Plugins Admin then of course my original issue relating to the Plugin Hash mismatch still exists.


Log in to reply