Notepad++ 7.5.9 release

Harold Krueger IV

@pnedev I do have periodic backup enabled but I just tried disabling it, restarted n++, problem still exists.

@donho I always keep n++ updated so I was coming from 7.5.8 and did not have this problem before.

I was able to reproduce the issue with a new file set to the JavaScript language. I started by writing a simple object declaration with a comment block inside. The comment block contains 5 paragraphs of lorem ipsum text as generated from https://loremipsum.io/ which I split on every sentence making the comment block 76 lines. It looks like this…

Section1 = {
    /*
        Lorem ipsum...
    */
}

I then copied the entire comment block and pasted it 13 times, one after the other, making the entire declaration 1066 lines. Then I copied and pasted all of that 8 times, one after the other, making the entire document 9597 lines (502,626 bytes)

Now, if I fold all (alt+0, and by the way this also takes several seconds to complete) and then unfold just one section and one comment block and just try to type some more text, I start seeing the freeze after a few keystrokes. If I unfold all (alt+shift+0), then the problem goes away and everything is very responsive as expected.

Fox-E

@pnedev Backup is disabled.
@donho Coming from 7.5.8 , so the problem is new in 7.5.9 .

I also tried @Harold-Krueger-IV 's method above, and have the same freezing issue when switching to a tab with lots of folded code.

To reproduce the plain text issue using basically Harold’s method:

Install a fresh Notepad++ with 100% vanilla settings. Leave the update notes tab open.
Open a new tab in Notepad++ with language as Normal Text.
Enable View > Word wrap .
Go to https://www.lipsum.com/ and ctrl+a copy the entire page.
Paste into the empty tab. Paragraphs must be wrapping for the Normal Text version of this problem to show.
Hold down the paste button for a few seconds. ctrl+a copy, then hold down paste for a few more seconds. You should now have a document of several million words and lots of wrapped lines.
Switch tabs back and forth between the update notes tab and the huge text file tab; it’ll freeze while pre-rendering the huge text file’s word wrapping (or code folding, etc).

In 7.5.8 , switching to such a large or heavily-folded tab will instantly display the document at the cursor, while rendering the rest of it in the background. If you watch the vertical scrollbar, you can see it slide and shrink as it does this, until the scrollbar pops to its final position.

In 7.5.9 , it just freezes until the whole document is rendered, and only then displays it.

7.5.8’s method is the preferable, expected behavior in my opinion. The freezing is bad for lots of tabbing around, while the background rendering is unobtrusive and never gave me any usability problems.

J Vickroy

Thanks for this great tool and the continued support!

I just upgraded to v7.5.9 and am seeing a vector <T> too long error dialog box when trying to position the cursor at the end of a line of text that extends beyond the screen horizontally. This behavior did not occur in v7.5.8.

For what its worth, this error does not occur when the DSpellCheck plug-in is disabled.

guy038

Hi, @don-ho and All,

Many thanks for this new version and, also, for the plugin manager, which is about to be launched !

So, I’m quite sorry, Don, for bothering you, but, indeed, there a problem with the new v7.5.9 version, when using a file, which contains very long lines ( ~1000 chars or over )

I followed the test method, given by @fox-e and I did obtain the same results as @fox-e and @harold-krueger-iv :-((

From the site https://www.lipsum.com/ I copied one page, and, with a lot of CTRL+V actions, I got a file of about 38.2 Mb ( > 40,000,000 bytes )

When the Wrap option is not set, N++'s behaviour is quite correct. But, as soon as the Wrap option is on, the fact of switching from, let’s say, the change.log file to this test file needs about 10 seconds before seeing the file contents !? If you close the file, with Ctrl + W and re-open it with Ctrl + Shift + T, again, the delay is really significant !

And, if you’re using, like me, the option Remember current session for next lauch and that this test file was the active tab, before closing, any restart of N++ take several seconds, providing that the wrap feature was set ! Just note that, on the contrary, if the active tab was change.log before closing, the restart of Notepad++ is quite correct !

And , unfortunately, it happens that this delay gets increasing, as the file size increases :-((

Here is my Debug Info information :

Notepad++ v7.5.9   (32-bit)
Build time : Oct 14 2018 - 15:02:52
Path : D:\@@\759\notepad++.exe
Admin mode : OFF
Local Conf mode : ON
OS : Windows XP (32-bit)
Plugins : DSpellCheck.dll mimeTools.dll NppConverter.dll NppExport.dll

Again, problem occurs ONLY when the Wrap feature is ticked !

Thanks for your investigation !

guy038

Jeffrey Jodoin

ISSUES ON LAUNCH.

When launching Notepad++ 7.5.9 on Windows 10, 64 bit system, I get the following in two
separate dialog boxes:

“Create new file” “C:\Program” doesn’t exist. Create it? YES OR NO buttons.
“Cannot open file” “C:\Program Files\Notepad ++\updater\Files\Notepad++\change.log” cannot be opened:
Folder “C:\Program Files\Notepad ++\updater\Files\Notepad++” doesn’t exist. OK button.

Happens EVERY time at program launch.

FYI.

jeff

Scott Sumner

@Jeffrey-Jodoin

IIRC, it sounds like the shortcut you have for running Notepad++ has the change.log file embedded in it?

Otherwise, try a search on site:https://notepad-plus-plus.org/community/ change.log.

Or maybe something related to this.

Jeison Rutz

@abdelhameedma I read somewhere that this is actually a bug with the DSpellCheck plugin. I uninstalled the plugin and I don’t have that issue anymore.

I’m not sure how to report this possible bug with the plugin; anyone?

Jeison Rutz

@Jeison-Rutz said:

@abdelhameedma I read somewhere that this is actually a bug with the DSpellCheck plugin. I uninstalled the plugin and I don’t have that issue anymore.

I’m not sure how to report this possible bug with the plugin; anyone?

@donho hello, and first of all, thanks for all the hard work.
For the issue “vector<T> too long” above, and for some other issues people mentioned about “long time for opening or switching open files tabs”: I was having all these issues until I uninstalled the DSpellCheck plugin. Now it works as fast as expected.
I have 64bit version of NPP on Windows 10, and I have and use XML Tools plugin quite often without any issues after I uninstalled DSpellCheck.

I hope this info helps.

Wolf War

I’m also having issue with vector <T> too long error
but the line doesn’t need to be too long
only that is wider than a view, so that scrollbar is shown

I do use DSpellCheck plugin, but I can’t test N++ without plugin because… I reverted to 7.5.8 ๏̯͡๏

btw. this was happening in 7.5.9 x64 version

guy038

@abdelhameedma, @wolf-war and All,

Refer to the link, below, where the issue is described :

https://github.com/Predelnik/DSpellCheck/issues/151

@predelnik ( Sergey Semushin ) have already produced a fix, below :

https://ci.appveyor.com/api/buildjobs/s4mc8o0q6wum0e2i/artifacts/DSpellCheck.dll

Please, abdelhameedma and wolf-war, could you check if it’s OK with that fix ?

You may post your reply to Sergey, directly on GitHub. Thanks !

Cheers,

guy038

Wolf War

@guy038
so far so good… I didn’t test it for long, but seems that fix is working
thx for info

Harold Krueger IV

@Jeison-Rutz I was able to bring back responsiveness by simply unchecking from the menu Plugins --> DSpellCheck --> Spell Check Document Automatically (Alt+A). Responsiveness came back immediately, no restart required so there is definitely something wrong with that plugin.

@guy038 Replacing the dll worked for me. I was able to re-enable spell check and responsiveness is still good. Thanks for finding the solution!

guy038

Hello, @don-ho and All

Regarding my description of the bug, when switching tabs, here :

https://notepad-plus-plus.org/community/topic/16468/notepad-7-5-9-release/23

I also tried in a DOS Console window, with the command notepad++.exe -noPlugin and, unfortunately, the problem is still here : when you switch from, for instance, change.log to the big test file, containing long lines, it takes significant time :-((

I just did that test to verify if the DSpellCheck plugin was concerned, because of the issue #151

https://github.com/Predelnik/DSpellCheck/issues/151

But, luckily, it’s a separated problem ! Or, at least, on a Win XP machine !

Cheers,

guy038

guy038

Hi, @harold-krueger-IV,

I’m not the one who deserves thanks ! Indeed, it is Sergey Semushin (alias Predelnick), the creator of DSpellCheck, who found a solution ;-))

Best Regards,

guy038

Fox-E

Just to doublecheck and confirm @guy038 , DSpellCheck’s issue has nothing to do with the big file tabswitch freeze.

With a vanilla Notepad++ install, removing DSpellCheck (and all other plugins, via folder deletion) doesn’t change anything; results are the same as described in prior posts, for both the plain text and javascript test cases.

Seems it’s basically cross-OS too:
Debug:
Notepad++ v7.5.9 (64-bit)
Build time : Oct 14 2018 - 15:19:55
Path : C:\Program Files\Notepad++\notepad++.exe
Admin mode : OFF
Local Conf mode : OFF
OS : Windows 10 (64-bit)
Plugins : none

I have an win xp machine I could try it on, but it looks like @guy038 already did that. I can say though that on win xp, prior Notepad++ versions always had the instant tabswitch with the background rendering.

donho

I can reproduce now by comparing the performance between 7.5.8 and 7.5.9
In my experience, the performance issue has gone after removing DSpellCheck.dll

@Fox-E @Harold-Krueger-IV Could you remove DSpellCheck.dll then see if the issue has gone?

@Predelnik Notepad++ 7.5.8 contains DSpellCheck 1.3.2, whereas Notepad++ 7.5.9 contains DSpellCheck 2.1.4 - so clearly there’s a performance issue in DSpellCheck 2.1.4.

guy038

Hi, Don, and All,

First, Don, after verifying from zip and 7z archives of N++ v7.5.9 ( in versions 32 or 64 ), I suppose that you meant that Notepad++ v7.5.9 contains DSpellCheck v1.4.6.0 ( and not 2.1.4 ?? )
Secondly, I re-tested my 7.5.9 local installation, after removing, either, DSpellCheck.dll file and, even, the DSpellCheck.ini file and the folder Hunspell and I can only conclude that the bug still occurs :-(( At least, on my Win XP laptop !

So, seemingly, it would not be related to DSpellCheck !?

Cheers,

guy038

P.S. :

I had placed all DSpellCheck stuff, in the ..\plugins\Doc folder

Fox-E

@donho No change here, still getting the issue. Checked again just now with a fresh, vanilla 7.5.9 install, deleted DSpellCheck.dll, and tested with Normal Text.

I did just notice though that you specifically have to switch tabs to see the issue; if you open a new tab, and paste a huge file in, it’ll instantly display (basically*) just fine. It’s only when you start switching tabs around that the issue happens.

*: Obviously as you get into really huge files, like 20 MB or 100 MB, it takes more and more time to paste, but this is normal, and has nothing to do with tabswitch freezing.

guy038

Hi @don-ho, @fox-e, and All,

And, above all, ONLY IF the Word Wrap feature is checked !!

Cheers,

guy038

donho

I think I have found the issue and fixed it.
Could you guys test this binary and confirm me that?
https://notepad-plus-plus.org/temp/npp.zip