[New Plugin] LuaScript

dail

v0.2.0 has been released! Comments/questions/suggestions are welcome.

Major updates include:

Upgraded Lua to 5.3
Ability to assign shortcut keys to Lua functions
Register callback functions for several events

For example many editors support finding the next match and also selecting it so that multiple instances can be edited at the same time. Placing this code in the startup script adds that functionality to a shortcut.

function SelectionAddNext()
	-- From SciTEBase.cxx
	local flags = 0 -- can use SCFIND_MATCHCASE
	if not editor.SelectionEmpty and editor:IsRangeWord(editor.SelectionStart, editor.SelectionEnd) then
		flags = flags | SCFIND_WHOLEWORD
	end
	editor:SetTargetRange(0, editor.TextLength)
	editor.SearchFlags = flags
	
	-- From Editor.cxx
	if editor.SelectionEmpty or not editor.MultipleSelection then
		local startWord = editor:WordStartPosition(editor.CurrentPos, true)
		local endWord = editor:WordEndPosition(startWord, true)
		editor:SetSelection(startWord, endWord)
	else
		local i = editor.MainSelection
		local s = editor:textrange(editor.SelectionNStart[i], editor.SelectionNEnd[i])
		local searchRanges = {{editor.SelectionNEnd[i], editor.TargetEnd}, {editor.TargetStart, editor.SelectionNStart[i]}}
		for _, range in pairs(searchRanges) do
			editor:SetTargetRange(range[1], range[2])
			if editor:SearchInTarget(s) ~= -1 then
				editor:AddSelection(editor.TargetStart, editor.TargetEnd)
				editor:ScrollRange(editor.TargetStart, editor.TargetEnd)
				break
			end
		end
	end
end

npp.AddShortcut("Selection Add Next", "Ctrl+Shift+D", SelectionAddNext)

Claudia Frank

@dail

Comments/questions/suggestions are welcome.

You asked for ;-)

make it theme aware
make userdata visible so that reflection can be used to execute code
possibility to clear console

BUT, regardless of my whises - GOOD JOB

Cheers
Claudia

dail

@Claudia-Frank

You asked for ;-)

Yep! Alot of this has been driven by my specific needs so the development can be kind of narrow. So it is always good to hear others’ ideas!

make it theme aware

Notepad++ doesn’t expose near enough API to make this possible without very ugly hacks. I tried a few hacks without much luck. However, there is a way partial way around this. There is a console object that you can use that is just like the editor object but it controls (no surprise) the console. In your startup script you can manually configure the styles for your theme doing something like this for each style Lua uses:

console.StyleFore[SCE_LUA_COMMENT] = 0x272822

This is not dynamic in any way, but if you are desperate you can hard-code alot of values.

make userdata visible so that reflection can be used to execute code

Care to elaborate a bit?

possibility to clear console

Good idea. Until then you can use this code:

function clear()
	console.ReadOnly = false
	console:ClearAll()
	console.ReadOnly = true
end

But agree a more user-friendly and intuitive option should also be added.

Claudia Frank

In python script you could do

dir(editor)

to get the list of editor functions.
With lua you could use getmetatable(editor) to get the same
but editor must have a metatable of course.

My idea behind is to use that kind of reflection to create automated test cases and
easily see if there are new functions. Another idea might be to enhance npp with
lua script for a dynamic intellisense and debugging functionality.

Cheers
Claudia

dail

Alot of the internal code came directly from SciTE. Mainly because I had no idea what I was doing (and honestly still don’t understand alot of it) ;)

Since the editor object has >400 methods/properties (not including getters and setters) there isn’t a Lua table that holds all this kind of information. Methods and properties are looked up as they are used, which helps reduce memory, etc especially since only a hand full of them are probably going to be used on a regular basis. That being said I’m not opposed to exposing some way to get this data. I’m certainly open to suggestions and use-cases.

Claudia Frank

To be honest, I just read about the possibility of having userdata exposing metable a few days ago. ;-)
Seems to be a new feature in lua 5.3 - I will try to get more details about it and if I feel I understood enough
I might open a feature request ;-)

Cheers
Claudia

dail

@Yaron

In case you are curious, this is how you’d get Visual Studio-like copy and paste functionality:

-- Mimic Visual Studio's "Ctrl+C" that copies the entire line if nothing is selected
npp.AddShortcut("Copy Allow Line", "Ctrl+C", function()
    editor:CopyAllowLine()
end)

-- Mimic Visual Studio's "Ctrl+X" that cuts the line if nothing is selected
npp.AddShortcut("Cut Allow Line", "Ctrl+X", function()
    if editor.SelectionEmpty then
        editor:CopyAllowLine()
        editor:LineDelete()
    else
        editor:Cut()
    end
end)

Also shortcuts show up in the plugin’s main menu so in theory you can assign them to N++'s context menu.

guy038

Hi All,

A simple method to mimic the Visual Studio’s shortcuts ( CTRL +C/X ) is to change the default shortcuts of the lines 91 and 92, of the Scintilla commands tab, in the Shortcut Mapper !

Just set the shortcut ALT + CTRL + X, in line 91 and the shortcut ALT + CTRL + C, in line 92

Of course, I need to use the additional ALT key. So, it’s not as neat as the Dail’s Lua script :-) But this may help, anyway !

REMARK : If I remember correctly, I think that :

The ALT + CTRL + C shortcut is used, by default, to open the Color Picker plugin
The ALT + CTRL + X shortcut performs, by default, the option Translate CamelCase/underscore_case of the Translate plugin

So, be aware of that, if you use the Color Picker and/or Translate plugins !

Cheers,

guy038

dail

Just using SCI_LINECUT and SCI_LINECOPY doesn’t quite match Visual Studio’s behavior. ;)

guy038

Hi Dail,

I, first, based on your two comments, in your Lua script, below :

– Mimic Visual Studio’s “Ctrl+C” that copies the entire line if nothing is selected

– Mimic Visual Studio’s “Ctrl+X” that cuts the line if nothing is selected

As you said that SCI_LINECUT and SCI_LINECOPY don’t have exactly the same behaviour :

I downloaded your last 0.2.0 version of your Lua plugin
After some searches, in your Lua documentation, I understood that the Notepad object npp.AddShortcut must be called, on startup only !
So, I put your lua script text, inside the StartUp script and save it. Then, I closed and restarted my 6.8.8 N++.

=> As expected, the new commands CTRL + C and CTRL + X do the job, nicely, even if no selection exists !

Unfortunately, I couldn not see any difference with the Scintilla commands SCI_LINECUT and SCI_LINECOPY ( that I kept, with the ALT + CTRL + X/C shortcuts ), even after pasting the clipboard contents, in an other document !

What I’m missing ?

Cheers,

guy038

dail

With the two shortcuts I’ve posted they work to enhance the normal copy and cut functionality. If there is a selection they both work as normal copy/cut. If there is no selection then they behave by copying or cutting the line. However, SCI_LINECUT and SCI_LINECOPY doesn’t pay any attention the the selection.

Secondly, to quote the documentation about SCI_COPYALLOWLINE

On Windows, an extra “MSDEVLineSelect” marker is added to the clipboard which is then used in SCI_PASTE to paste the whole line before the current line.

So the difference is when it is pasted it replaces the entire line instead of pasting the line directly at the cursor’s position.

Similar effects can be achieved both ways but users that are use to Visual Studios will definitely notice a difference.

Yaron

Hello all,

@Claudia-Frank,
Thank you for your contribution (and generosity…).

@guy038,
Thank you for your contribution. Nice to see an old friend. :)

@dail,
Thank you for further developing and improving this important plugin. Great work.

And thanks also for referring to my Copy Line request. Really nice.

It would be nice to have a function coping the current line regardless of any selection (like editor.lineCopy() in PythonScript).

I actually meant an option to copy the entire line even if part of it is selected.
In a future version. :)

And, with your permission, two more requests:

A context-menu in the Console Output field.
An option to change text direction (LTR/RTL) in the Console Input field.
(PythonScript uses the System Edit-Context-Menu which includes this functionality).

Best regards.

dail

@Yaron

I actually meant an option to copy the entire line even if part of it is selected.

If I understand what you are wanting you can simply use editor:LineCopy()

A context-menu in the Console Output field.

Would be simple to add. If you want you can open a feature request on Github and we can discuss it more there.

An option to change text direction (LTR/RTL) in the Console Input field.

One of the change I made from PythonScript was replace the input field with a Scintilla control. So I’m not sure how easy this would be to change the text direction.

guy038

Hello Dail,

Thanks for your quick reply ! But, even before opening my laptop and seeing your post, this morning ( in France ! ), I had understood the differences between the two behaviours. Indeed, although I ran the copy and cut commands, with a previous selection, I did not see the differences, at first sight !

Sorry. It would have saved you to reply me about this matter, as you, certainly, need time to develop your Lua plugin :-(

Best Regards

guy038

BTW, it’s a chance that you give the Visual Studio’s method, about copy/cut text ! Because, the two commands editor:LineCopy() and editor:LineDelete() are absent, from your Lua Script documentation, at the address below :

https://github.com/dail8859/LuaScript/blob/master/doc/editor.md

Yaron

Hello dail,

Thanks for replying.

Yes, I was looking for ‘editor:LineCopy()’.
Not finding it in the documentation page, I assumed it was not available.

I’ve opened two issues on GitHub.

Best regards.

dail

A new version has been release. v0.4.0

Now with API documentation. https://dail8859.github.io/LuaScript/

This release includes bug fixes, GUI enhancements, and a large portion of the Notepad++ message and notifications are available.

As always, comments/questions are welcome.

MaximilianKohler

The startup script doesn’t seem to work with the PortableApps dot com version. I was trying to use this:

community.notepad-plus-plus dot org/topic/11233/disable-ascii-control-characters-shortcuts/5

I’ll post to the portableapps forum and see what they say:
portableapps dot com/node/70143

Alan Kilborn

@MaximilianKohler said in [New Plugin] LuaScript:

with the PortableApps dot com version

This isn’t a supported version.
Best thing to do is not use it.
Notepad++ itself distributes a “portable” version – use that.

mpheath

@MaximilianKohler Do a simple test to debug.

startup.lua:

-- Startup script
-- Changes will take effect once Notepad++ is restarted

print('Hello World')

Console:

Hello World
Lua 5.3.5  Copyright (C) 1994-2018 Lua.org, PUC-Rio

With the PortableApps distribution of Notepad++, If you install a plugin and Notepad++ restarts then the environmental variables related to PortableApps are not set from that instance of Notepad++. You need to close that instance and start a new instance using Notepad++Portable.exe to have those environmental variables set. You can check by running CMD and use the command set from Notepad++ to see all the extra environmental variables that are added or values being modified.