Monitor (tail -f) prompts to reload file
Meta Chuh last edited by
welcome to the notepad++ community, @jhyslop
i believe you, albeit not being able to reproduce this.
(see screencast below, with working monitoring on 7.6.6 x64)
we had a second report about this, so we suppose it might be a setting, plugin, or leftover from an old installation that could cause this.
please test the following, to verify, if a clean notepad++ (without any plugins or settings that could cause this) would work on your system.
download the notepad++ 7.6.6. 64 bit portable version from >>> here <<<.
(the portable version does not require any installation and runs completely independent and isolated from your installed version. all custom settings, as well as any stuff you might want to try at the portable version, will not modify your installed version)
npp.7.6.6.bin.x64.zipto e.g. your desktop.
important note: make sure to close all instances of notepad++ that might be running, before starting the portable version at the next step, to be sure you are using the portable version for this test.
open the extracted
npp.7.6.6.bin.x64folder and start this portable version by double-clicking on
notepad++.exeinside this folder.
(note: notepad++.exe will just be seen as notepad++, if you have enabled to hide all known file extensions at your explorer settings)
retry monitoring (tail -f) on the same files using this portable version.
working monitoring (tail -f) on 7.6.6. x64:
many thanks and best regards
IT Staff last edited by
I have been seeing this same issue. I tried the suggestion of downloading the zip and running in portable mode, but still seeing prompts to reload the file. Sometimes it does update the file even though it prompts, and sometimes I have to acknowledge the prompt to get it to reload. I did occasionally see this behaviour in the past but it was very rare. I noticed that so far I have only been able re-create this issue when monitoring files on the network. When I monitor a file on my local computer I have not yet seen the prompt (although I rarely do this).
Meta Chuh last edited by
melle sterk last edited by melle sterk
I had the same problem with a 32-bit version(v.7). I installed this solved my problem 64 v.7.6.4
melle sterk last edited by
@melle-sterk I cant edit my prev submission. but I do still have the problem after installing both version. it only looked like it dindt for a second. So ignore my prev message
Paul Renold last edited by
Still seems to be an issue with v7.7
Meta Chuh last edited by Meta Chuh
Manuel Romeiro last edited by
I installed the V7.8 32-bit (built time Oct 7 2019 - 00:58:16) and continue not working.
Now, there is not prompt, but don’t update the changes.
Manuel Romeiro last edited by
Improving my last answer.
The functionality “tail -f” seams working when data changes and stream is closed, but sometimes not works if the file stream remains opened.
I tested it, redirecting java application output to one file (some_java_application > out.log).
The Notepad++ only updated at the begin (when file was cleaned) and at the end (when application ends, and file stream was closed).
If I disable the “tail -f”, the prompt comes again as expected, when focus in Notepad++ with files changes, even when stream remains opened (that means the Notepad++ have capability to detect changes on files with stream open, but not when “tail -f” enabled).
I’ll comment again if I reproduce this with a simple application, but bellow I reproduce partially with native ms-dos applications.
After that, I tried to reproduce the problem only using windows base applications, and that works better, but not perfect.
Executing the bellow command on the console:
ping -t 0.0.0.0 > test_tail_notepad_plus_plus.txt
The Notepad++ with “tail -f” enablled only updates when:
- At the begin, when file was cleared;
- Receiving focus on Notepad++;
- Press F5 on Explorer with file folder opened (native file Explorer of windows);
There are missing updates on acceptable time for tail functionality, even Notepad++ don’t have focus (for example refresh rates of 1 second).
I’m running Notepad++ V7.8 32bit on windows 10 64bit.
SinghRajenM last edited by SinghRajenM
@Manuel-Romeiro it seems these all are windows limitation. It is explained here - https://github.com/notepad-plus-plus/notepad-plus-plus/pull/5591#issuecomment-487341747
Refreshing every second could be an option. But it will keep utilizing CPU even if there is no change as well because the monitoring thread has to do polling every second which is against the design of change notification.
SinghRajenM last edited by
For reference to all -
Any file-size change in the watched directory or subtree causes a change notification wait operation to return. The operating system detects a change in file size only when the file is written to the disk. For operating systems that use extensive caching, detection occurs only when the cache is sufficiently flushed.
Any change to the last write-time of files in the watched directory or subtree causes a change notification wait operation to return. The operating system detects a change to the last write-time only when the file is written to the disk. For operating systems that use extensive caching, detection occurs only when the cache is sufficiently flushed.
Manuel Romeiro last edited by Manuel Romeiro
@SinghRajenM Yes, it’s exactly that issue.
I’ll continue using the functionality knowing that limitation.