Strange behavior of the sort function, with zero-length column mode selection

guy038

Hi, All,

I would like to get your feedback on this weird behavior. Could you confirm me that there is a problem ?

IMPORTANT : Although, I installed the BetterMultiSelection plugin, on my local N++ v8.4.6 configuration, I disabled this plugin during the tests !

Follow exactly all the subsequent steps :

In a new tab, insert the text, below :

    xyz
    -PQR
    AB-C
    abc
    ABCDEF
    abcdef
    ABC-DEF
    -pqr
    ab-c
    x-yz
    X-YZ
    ABC
    abc-def
    XYZ

Just note that these lines are randomly sorted.

Now, make a zero-length column-mode selection of all the lines, right after the four space chars ( indication Sel: 14x0 in the status bar )
Type in, for instance, a double-quote " ( to be sure that you’ve entered in the column-mode ! )
Run the option Edit > Line Operations > Sort Lines Lexicographically Ascending

=> No modification occur !?

Hit the Del key to delete all the "
Run, again, the Edit > Line Operations > Sort Lines Lexicographically Ascending option

=> Still, no change occur !?

Hit the Left Arrow key to cancel the colum mode
Again, make a zero-length column-mode selection of all the lines, right after the four space chars ( indication Sel: 14x0 in the status bar )
Select, for the last time, the Edit > Line Operations > Sort Lines Lexicographically Ascending option

=> This time, as expected, the lines are correctly sorted ( Lexicographically Ascending ), as below :

    -PQR
    -pqr
    AB-C
    ABC
    ABC-DEF
    ABCDEF
    X-YZ
    XYZ
    ab-c
    abc
    abc-def
    abcdef
    x-yz
    xyz

Notes :

If, instead of the leading space chars, you insert a tabulation char, for all the lines and repeat the same steps, the problem persists :-(
If the BetterMultiSelection is enabled, the problem is identical, too !

Let’s try an other test :

Insert the example test in a new tab

    xyz
    -PQR
    AB-C
    abc
    ABCDEF
    abcdef
    ABC-DEF
    -pqr
    ab-c
    x-yz
    X-YZ
    ABC
    abc-def
    XYZ

Make a zero-length column-mode selection of all the lines, right after the four space chars ( indication Sel: 14x0 in the status bar )
Type in, for instance, the sharp char # ( to be sure that you’ve entered in the column-mode ! )
Run the Edit > Line Operations > Sort Lines Lexicographically Ascending option

=> As said above, no modification occur !?

Now, hit simultaneously the Alt and Shift keys and successively the Right Arrow and Left Arrow keys
Run, again, the Edit > Line Operations > Sort Lines Lexicographically Ascending option

=> This time, although the resulting column mode is STILL a zero-length selection, the behaviour of the sort is correct and gives, as epected :

    -PQR
    -pqr
    AB-C
    ABC
    ABC-DEF
    ABCDEF
    X-YZ
    XYZ
    ab-c
    abc
    abc-def
    abcdef
    x-yz
    xyz

In summary, sort does not seem to occur when, simultaneously :

A column-mode selection is active
A char have been added or deleted
The column-mode selection is a zero-length one

On the contrary, the sort seems correct if :

A non-zero length column-mode selection is active
OR
A resulting zero-legnth column-mode selection is active
OR
No modification of the column-mode selection have been occurred

Best Regards,

guy038

P.S. :

Notepad++ v8.4.6   (64-bit)
Build time : Sep 25 2022 - 19:51:39
Path : E:\846_x64_RC3\notepad++.exe
Command Line : 
Admin mode : OFF
Local Conf mode : ON
Cloud Config : OFF
OS Name : Windows 10 Pro (64-bit) 
OS Version : 21H2
OS Build : 19044.2075
Current ANSI codepage : 1252
Plugins : 
    mimeTools (2.8)
    NppConverter (4.4)
    NppExport (0.4)
    ComparePlus (1)
    BetterMultiSelection (1.5)

Alan Kilborn

@guy038

If you make a column selection, then the Scintilla function SCI_SELECTIONISRECTANGLE will return 1 meaning true.

However, if after making the column selection, you use it to modify text, a call to SCI_SELECTIONISRECTANGLE will then return 0 meaning false, even though you can plainly see with your eyes that your column selection is still reasonable and valid. Apparently the column selection is now considered “n” separate selections (multi-select), where “n” is the number of lines covered by the selection. And…subsequent actions that depend upon column mode will possibly act strangely, as you’ve discovered.

You can try checking the Scintilla mode yourself by going to the PythonScript console window and typing editor.selectionIsRectangle() at the >>> prompt and pressing Enter, after you’ve set up your desired conditions in the editing window. This will show you what Scintilla thinks the current state is. Of course, you’d have to add PythonScript to your plugins for this.

Note that from the PS console window, to get back to the editing window without altering your previously made selection, you might want to use the “two taps on the Windows key” trick, to experiment further. Clicking with the mouse into the editor window will destroy your previously set up selection.

PeterJones

@guy038 ,

Alan reminded me in chat about the conversation PythonScript Toggleable Script?, where I developed SelectionToRectangle.py, which converted a normal stream selection to a column (rectangle) selection.

Using the concepts from that, I saw that after your manipulation (above) the selection converts from a rectangle selection to a multi-selection. If I just ran the SelectionToRectangle.py, the modes claim to be a rectangular selection again… but looking at the selection start/end, it’s a one-row rectangle, so not very columnar.

However, before doing the conversion, the multi-selection still had the original extents for the beginning and end of selection. So using those values to create a new stream selection, and then using the SelectionToRectangle to convert to rectangular from that new stream, I think it works as desired:

    one
    two
    three
    four

Instructions:

Save this script, and optionally assign it a keyboard shortcut
use the one…four text above, do a column selection between the fourth space and the letters
type " then backspace to replicate Guy’s issue
Edit > Line Operations > Sort Lines Lexicographically Ascending – order should still be one, two, three, four, because it doesn’t sort because of multi-selection
run this script
Edit > Line Operations > Sort Lines Lexicographically Ascending – order should now be four, one, three, two, because it went back to column/rectangle-selection

# encoding=utf-8
"""
Derived from SelectionToRectangle.py from 22890-simplest.py, in response to https://community.notepad-plus-plus.org/topic/23564,
which had (accidentally) changed a Column Selection to a Multi-Selection instead. This converts a multi-selection to a column-selection
"""
from Npp import notepad, editor, SELECTIONMODE, STATUSBARSECTION

#console.clear()
#console.write("PRE:  {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))

if not(editor.selectionIsRectangle()) and (editor.getMultipleSelection()):
    ss,se = editor.getSelectionStart(), editor.getSelectionEnd()
    #console.write("GET:  {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))
    editor.setSelection(ss,se)
    #console.write("SET:  {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))
    editor.setSelectionMode( SELECTIONMODE.RECTANGLE )
    #console.write("RECT: {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))

notepad.activateFile(notepad.getCurrentFilename()) # use the activateFile() command to refresh UI; otherwise, it doesn't _look_ like column/rectangle select)
#console.write("POST: {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))

PeterJones

Some more research and experimentation:

The reason it changed mode out of Rectangle mode is because Scintilla has a selection mode called SC_SEL_THIN which indicates “the mode after a rectangular selection has been typed into and ensures that no characters are selected”. So what Guy found is not a bug: rather, Scintilla intentionally leaves pure Rectangle Selection Mode (SC_SEL_RECTANGLE) after you make edits; and the line operation sorting functions only work with stream or rectangle selections, not with “thin” selections or multi-selections.

The script I showed above will get you back into full rectangle mode from the THIN mode, but not from any others.

I have now updated my original SelectionToRectangle.py to work whether the active selection is starting from a normal (“stream”) selection, from an edited-column (“thin”) selection, or from a multi-selection: all three of those will be converted into a column-mode selection. And if it’s already a column-mode (“rectangle”), it will remain unchanged.

SelectionToRectangle.py v2022.10.06

# encoding=utf-8
"""
Derived from 22890-simplest.py, in response to https://community.notepad-plus-plus.org/topic/22890/

2022-Oct-06: modify based on https://community.notepad-plus-plus.org/topic/23564 to convert either stream selection (old behavior) or multi-selection (new behavior) to a single column selection

This is the simplest paradigm for converting a stream (normal) selection to rectangular (column):
1) Click or arrow to where you want to start selecting
2) Shift+Click or Shift+arrow to get to the end of the selection (ie, do a normal selection)
3) Run this script to convert the selection from STREAM to rectangle and refresh the screen automatically to see it

You can also start with a Multi-Selection (multiple Ctrl+Clicks) and convert it, with the start of the column at the lowest selection-start, and the end of the selection at the highest selection-end
"""
from Npp import notepad, editor, SELECTIONMODE, STATUSBARSECTION

if editor.getSelectionMode()==SELECTIONMODE.THIN:    # this is the mode after making an edit in rectangle(column) mode
    ss,se = editor.getSelectionStart(), editor.getSelectionEnd()
    editor.setSelection(ss,se)

if editor.getSelectionMode()==SELECTIONMODE.STREAM and editor.getSelections()>1:    # this is multi-selection mode
    ss = None
    se = None

    for si in range(0, editor.getSelections()):
        s0 = editor.getSelectionNStart(si)
        s1 = editor.getSelectionNEnd(si)
        if ss is None or s0 < ss: ss = s0
        if se is None or s1 > se: se = s1

    editor.setSelection(ss,se)

if editor.getSelectionMode()<>SELECTIONMODE.RECTANGLE:
    editor.setSelectionMode( SELECTIONMODE.RECTANGLE )
    notepad.activateFile(notepad.getCurrentFilename()) # use the activateFile() command to refresh UI; otherwise, it doesn't _look_ like column/rectangle select)

Alan Kilborn

@PeterJones said in Strange behavior of the sort function, with zero-length column mode selection:

So what Guy found is not a bug…the line operation sorting functions only work with stream or rectangle selections, not with “thin” selections.

To me it sounds like Guy found a Notepad++ bug. When sorting, a zero-width selection – declared by code as “thin” or not, user doesn’t care about that distinction in this circumstance – over a number of lines is supposed to use as the sort key the data starting in the column of the selection and continuing to end-of-line (for each line). Note that this is a bit different from a sort using a non-zero width column selection, where the sort key is only the text shown as selected on each line.

PeterJones

@Alan-Kilborn said in Strange behavior of the sort function, with zero-length column mode selection:

To me it sounds like Guy found a Notepad++ bug. …

From that perspective, it does sound like it doesn’t meet user expectations.

So yeah, Guy should go ahead and report it as a bug. If he does, it would be best to explain that SC_SEL_RECTANGLE sorts as expected, but SC_SEL_THIN does not sort when it is expected to do so.

Alan Kilborn

I’d think changing THIS from:

if (_pEditView->execute(SCI_SELECTIONISRECTANGLE))

to:

if ((_pEditView->execute(SCI_SELECTIONISRECTANGLE)) || (_pEditView->execute(SCI_GETSELECTIONMODE) == SC_SEL_THIN))

should fix it.

guy038

Hello, @alan-kilborn, @peterjones and All,

Many thanks for your feedback ! I now understand the problem and, certainly, the last suggestion of Alan seems the correct one !

I’ll create a new issue, very soon ! We’ll just have to live what this tiny problem !

Of course, we could, as well, have simply used the Stream Selection, right before the sort. In this case, the result is always correct !

Now, Peter and Alan, I’m upset by a behavior, a bit off-topic, relative to the PythonScript plugin. Let me explain :

On my new Windows 10 laptop, I still did not transfer all my personal data from my old XP laptop. So, in the meanwhile, I use an USB key ( E: ), containing some folders whose one is 846_x64_RC3 which contains the last locale N++ version

After installing, as you suggested, the PythonScript plugin with the Plugins > Plugin Admin... option, I selected the Plugins > PythonScript > New Script option which created an empty Test.py file in the folder E:\846_x64_RC3\plugins\Config\PythonScript\Scripts. Then, I pasted the contents of the @pterjones script, below, and re-saved it :

# encoding=utf-8
"""
Derived from SelectionToRectangle.py from 22890-simplest.py, in response to https://community.notepad-plus-plus.org/topic/23564,
which had (accidentally) changed a Column Selection to a Multi-Selection instead. This converts a multi-selection to a column-selection
"""
from Npp import notepad, editor, SELECTIONMODE, STATUSBARSECTION

#console.clear()
#console.write("PRE:  {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))

if not(editor.selectionIsRectangle()) and (editor.getMultipleSelection()):
    ss,se = editor.getSelectionStart(), editor.getSelectionEnd()
    #console.write("GET:  {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))
    editor.setSelection(ss,se)
    #console.write("SET:  {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))
    editor.setSelectionMode( SELECTIONMODE.RECTANGLE )
    #console.write("RECT: {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))

notepad.activateFile(notepad.getCurrentFilename()) # use the activateFile() command to refresh UI; otherwise, it doesn't _look_ like column/rectangle select)
#console.write("POST: {}..{} R:{} M:{}\n".format(editor.getSelectionStart(), editor.getSelectionEnd(), editor.selectionIsRectangle(), editor.getMultipleSelection()))

The INPUT text was in E:\xxx.txt file and, after following the @peterjones instructions, everything was OK !

However, I do not understand why IF I select again the Plugins > PythonScript > New Script option, this time, the Save under... windows proposes to save the future .py file in the \E folder instead of the normal location E:\846_x64_RC3\plugins\Config\PythonScript\Scripts ?!

Do you have some hints about it ? I surely miss something obvious !

Thanks, in advance !

Best Regards,

guy038

Notepad++ v8.4.6   (64-bit)
Build time : Sep 25 2022 - 19:51:39
Path : E:\846_x64_RC3\notepad++.exe
Command Line : 
Admin mode : OFF
Local Conf mode : ON
Cloud Config : OFF
OS Name : Windows 10 Pro (64-bit) 
OS Version : 21H2
OS Build : 19044.2075
Current ANSI codepage : 1252
Plugins : 
    mimeTools (2.8)
    NppConverter (4.4)
    NppExport (0.4)
    ComparePlus (1)
    BetterMultiSelection (1.5)
    PythonScript (2)

The command line set gives :

ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Guy\AppData\Roaming
BRB=C:\Program Files\HP\Sure Click\bin
BRS=C:\Program Files\HP\Sure Click\servers
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=GUYTOU
ComSpec=C:\windows\system32\cmd.exe
DriverData=C:\Windows\System32\Drivers\DriverData
FPS_BROWSER_APP_PROFILE_STRING=Internet Explorer
FPS_BROWSER_USER_PROFILE_STRING=Default
HOMEDRIVE=C:
HOMEPATH=\Users\Guy
LOCALAPPDATA=C:\Users\Guy\AppData\Local
LOGONSERVER=\\GUYTOU
NUMBER_OF_PROCESSORS=8
OneDrive=C:\Users\Guy\OneDrive
OnlineServices=Online Services
OS=Windows_NT
Path=: E:\846_x64_RC3\notepad++.exe
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
platformcode=AN
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 140 Stepping 1, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=8c01
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Program Files\WindowsPowerShell\Modules;C:\windows\system32\WindowsPowerShell\v1.0\Modules
PUBLIC=C:\Users\Public
RegionCode=EMEA
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\windows
TEMP=C:\Users\Guy\AppData\Local\Temp
TMP=C:\Users\Guy\AppData\Local\Temp
USERDOMAIN=GUYTOU
USERDOMAIN_ROAMINGPROFILE=GUYTOU
USERNAME=Guy
USERPROFILE=C:\Users\Guy
windir=C:\windows
ZES_ENABLE_SYSMAN=1

Terry R

@guy038 said in Strange behavior of the sort function, with zero-length column mode selection:

However, I do not understand why IF I select again the Plugins > PythonScript > New Script option, this time, the Save under… windows proposes to save the future .py file in the \E folder instead of the normal location E:\846_x64_RC3\plugins\Config\PythonScript\Scripts ?!

After reading that I’m wondering if a variable has been set if the first use was in relation to the E:\ drive. Now any successive use of this will use the pre-set variable of E:\ as a starting point since it’s already set.

Possibly a test might be to complete a fresh start of NPP and do a new script and see what the Save Under proposes.

Terry

Alan Kilborn

@guy038

I also have problems with the PythonScript > New Script command suggesting a folder that isn’t the one I want. It typically suggests a folder that is the scripts folder for another version of Notepad++ that I’ve recently used. I’ve no idea why this happens; I’ve posted about this before but never came to a resolution. So…I’m just doubly careful when I save a new script, such that it is going into the correct folder!

guy038

Hi All,

Could it be connected with the fact of putting a local N++ install on a removable drive ?

BR

guy038

guy038

Hi, @terry-r, @alan-kilborn, @peterjones and All

I’m really perplexed !!??

On my USB drive, I created a new folder E:\846_x64
Then, I moved the npp.8.4.6.portable.x64.7z archive, that I kept, from the folder E:\846_x64_RC3 to the new folder E:\846_x64
I opened this archive and extracted all the contents in the E:\846_x64 folder
I defined my preferred parameters in Settings > Preferences...
And I downloaded the PythonScript plugin via the Plugin Admin

Bingo ! I’m pleased to tell you that, whatever the current tab, as soon as I select the Plugins > PythonScript > New Script option, the Save inder window always opens in E:\846_x64\plugins\Config\PythonScript\Scripts ;-))

Finally, I added the ComparePlus and BetterMultiSelection plugins and everything is still OK !

So, I don’t see why it’s OK on a local N++ install, in folder E:\846_x64 and KO on a SAME local N++ install, in folder E:\846_x64_RC3 ???

Anyway, my problem is solved !

Best Regards,

guy038

…A quarter of an hour later, even if I use my old local N++ version, within the E:\846_x64_RC3 folder, everything seems OK, again ??? Really confusing !

guy038

Hi all,

As promised, I created a new issue concerning this problem :

https://github.com/notepad-plus-plus/notepad-plus-plus/issues/12299#issue-1401062911

BR

guy038

guy038

Hello @alan-kilborn and All,

In the post above, of this discussion :

https://community.notepad-plus-plus.org/post/80361

You said that you met the problem, sometimes in the past and that you haven’t find a solution yet to the fact that running the Plugins > PythonScript > New Script does not open the folder Local N++ install\Plugins\Config\PythonScript\Scripts, in the case of a local N++ install !

I’ve already found out two ways to reproduce this wrong behavior and also how to get the right folder ! Could you, Alan, @peterjones or someone else confirm my hypotheses ?

A wrong folder destination, when using the Plugins > PythonScript > New Script option, may occur when :

You’re trying, by mistake, to open an already opened file in your current N++ session which is not saved in the ...\Plugins\Config\PythonScript\Scripts folder
You’re saving a new_x file, in a specific folder, different from the ...\Plugins\Config\PythonScript\Scripts folder

So, an easy solution is to re-open a Python script of your current session ! Afterwards, any use of the Plugins > PythonScript > New Script option should open the right folder ...\Plugins\Config\PythonScript\Scripts ;-))

Remark : Note that holding the Ctrl key, while using the Plugins\Python Scripts\Scripts\"Script Name" option, does not help in this matter :-((

Best Regards,

guy038

Alan Kilborn

@guy038 said in Strange behavior of the sort function, with zero-length column mode selection:

two ways to reproduce this wrong behavior

As I never do those two actions, that isn’t a way I’m getting into the circumstance.

My problem with it mainly occurs when I am running a different instance of N++ to test a script in a “clean” setup. I tell it to create a New Script and it wants to save the file in the correct folder but in my daily use Notepad++.

I have several workarounds for this, but it is annoying behavior to say the least.

Alan Kilborn

The “Strange behavior of the sort function, with zero-length column mode selection” has been SOLVED by the developers and will be in the next release, presumably 8.4.8.