Config Files Need Updating, Too

PeterJones

As I say in my reply over there, it looks like your copy is getting stuck long before it would ask to restart – it should have printed at least stylers.xml in the Status dialog. When I use my Win11 installed v8.8.1, or spin up a Win10 VM with an installed v8.8.1, it works as expected for me, so I don’t know what’s happening for you. We can continue the debug over in your Issue #2 discussion.

If it doesn’t change anything being as it’s the latest version of NPP, shouldn’t it not shutdown after running it with no changes?

haha, you’re funny. The “latest version of NPP” ships with themes that have many missing LexerTypes (languages) and stylers within the lexers, which is a major reason this plugin is needed. If you’ve never run the old ConfigUpdater.py or the plugin version, it’s guaranteed to make changes. (And even if you have run it before, because it does things like sort the languages, it always attempts to write all the themes, so will ask to restart even if it’s writing the same values back – someday, I might get my logic better to figure out how to compare the old-vs-new for the XML, and not ask to write if it doesn’t need to; but for now, that was the easiest to program.)

Lycan Thrope

@PeterJones ,
Okay, I’ll try your first suggestion, since you have VM’d a version and it works. It could be one of my plugins so I’ll start with deleting them, and report there, here. what’s up.

I did run the ConfigUpdater.py, but that was for testing when you started, and I haven’t done it since then, but it’s good to know even when the latest NPP is loaded, it’s already outdated. :-)

Lycan Thrope

@PeterJones ,
Report is in the Github post I just made, but the apparent problem was two off-book plugins I had tested and was playing with which are:

ControlledAutoIndent (1)
WebEdit (2.7)

As I mentioned in Github, they could just be incompatible with the latest Scintilla updates for all I know, but until they don’t cause a problem, I don’t need them and your plugin works fine for me with repository listed plugins. Hope this helps.

Coises

@Lycan-Thrope said in Config Files Need Updating, Too:

@PeterJones ,
Report is in the Github post I just made, but the apparent problem was two off-book plugins I had tested and was playing with which are:

ControlledAutoIndent (1)
WebEdit (2.7)

I am on Windows 10. With my ControlledAutoIndent plugin installed (even when Enabled is not checked — in which state it should be doing nothing), I get the same result as @Lycan-Thrope.

When I removed it and tried again, I got through the first phase and encountered the request to restart. After answering OK, waiting for relaunch and then selecting Update Config Files again, a bunch of activity occurred, and then this came up:

This much is reproducible. I will try to investigate further. Debug info (captured before running first phase without ControlledAutoIndent):

Notepad++ v8.8.1   (64-bit)
Build time : May  3 2025 - 18:41:09
Scintilla/Lexilla included : 5.5.6/5.4.4
Boost Regex included : 1_85
Path : C:\Program Files\Notepad++\notepad++.exe
Command Line : 
Admin mode : OFF
Local Conf mode : OFF
Cloud Config : OFF
Periodic Backup : OFF
Placeholders : OFF
Scintilla Rendering Mode : SC_TECHNOLOGY_DIRECTWRITE (1)
Multi-instance Mode : monoInst
File Status Auto-Detection : cdEnabledNew (for current file/tab only)
Dark Mode : OFF
OS Name : Windows 10 Pro (64-bit)
OS Version : 22H2
OS Build : 19045.5737
Current ANSI codepage : 1252
Plugins : 
    ColumnsPlusPlus (1.2)
    ComparePlus (1.2)
    ConfigUpdater (2)
    DSpellCheck (1.5)
    mimeTools (3.1)
    NppConverter (4.6)
    NppExport (0.4)

Edit to add: I continue to get the Access Violation in the second phase even after removing all plugins except ConfigUpdater. I will continue to search for the causes of both errors.

Edit to add 2: The problem with ControlledAutoIndent was entirely due to a mistake in that plugin. It’s not even a “conflict,” just a straight-up error. I had no idea what would cause an “External Lexer” to be used. (The plugin keeps track of the current language so it knows what indentation rules to apply.) I made a silly mistake in the code that handles the External Lexer case, and just never hit it until now.

Coises

@PeterJones

I can give you this much concerning the apparent cause of the access violation:

but I don’t know what to check to determine what might be leading to this condition. Quite possibly I have some very old version of one of these files, because as best I can remember, I have never manually edited any of them except (I think) shortcuts, and I’ve never bothered to try to upgrade them outside whatever the Notepad++ installer does.

PeterJones

@Coises ,

Edit to add 2: The problem with ControlledAutoIndent was entirely due to a mistake in that plugin. It’s not even a “conflict,” just a straight-up error. I had no idea what would cause an “External Lexer” to be used. (The plugin keeps track of the current language so it knows what indentation rules to apply.) I made a silly mistake in the code that handles the External Lexer case, and just never hit it until now.

I’m not sure why the ConfigUpdater plugin would trigger your plugin to think there was an External Lexer (it is not a lexer plugin, after all)… but I’m glad you found that one.

Edit to add: I continue to get the Access Violation in the second phase even after removing all plugins except ConfigUpdater. I will continue to search for the causes of both errors.

Access Violation implies that there’s a null pointer someplace. I thought I’d fixed that for all the styler/themes, but with langs.xml being the last message in the status, maybe I didn’t check properly in the langs-updater. I’ll go take a look. (However, my normal debug in Win11 and my VM+Win10 tests all worked just fine for both themes and langs, so I still cannot reproduce the problem that’s causing that, so even if I find something, I’ll have to rely on you to test if I’ve actually fixed it.

While I am looking, could you try to do CANCEL instead of YES, and see if you still get the Access Violation at langs.xml when you are not running in Admin mode?

update 1: I see you posted a reply just before my post: thank you for that Call Stack: I will start my search at line 1077. :-)

update 2: could you go to the issues page and create a new issue (this Access Violation is separate from the freeze/crash, I think), and attach your langs.xml to the issue? Maybe with that file, I’d be able to reproduce the problem.

Coises

@PeterJones said in Config Files Need Updating, Too:

I’m not sure why the ConfigUpdater plugin would trigger your plugin to think there was an External Lexer (it is not a lexer plugin, after all)… but I’m glad you found that one.

Apparently ErrorList is an external lexer, and ControlledAutoIndent is picking that up as the active language at some point.

While I am looking, could you try to do CANCEL instead of YES, and see if you still get the Access Violation at langs.xml when you are not running in Admin mode?

Same result (at least, superficially). However, I realize now that the switch to Admin mode was not happening when running under the debugger; the call stack I posted was happening with Notepad++ not in Admin mode. I don’t know if there is a way I can trap an error in the debugger while running with elevated permissions.

update 2: could you go to the issues page and create a new issue (this Access Violation is separate from the freeze/crash, I think), and attach your langs.xml to the issue? Maybe with that file, I’d be able to reproduce the problem.

I will do that shortly.

PeterJones

@Coises said in Config Files Need Updating, Too:

Apparently ErrorList is an external lexer, and ControlledAutoIndent is picking that up as the active language at some point.

I guarantee it is not: it is a standard Lexilla lexer. Did you update your menuCmdID.h file which defines the external lexer constants?

…
No, it doesn’t look like you have:

But since it’s IDM_LANG+93 vs IDM_LANG+165, and you shouldn’t be looking at the IDM, that’s not the likely culprit (though something you should still fix)

Ah, searching for external in your plugin:

it’s using the L_xxxx enumeration values from the Notepad_plus_msgs.h::LangType enumeration

And that makes sense: Don chose to use whatever the “last” enumeration value happens to be for L_EXTERNAL, which means that every time a new built-in language is added, all plugin authors who compare vs L_EXTERNAL must update Notepad_plus_msgs.h whenever N++ does, otherwise their comparison will be off for anyone using one of the newer lexers in the most recent N++.

So definitely update menuCmdID.h and Notepad_plus_msgs.h, and then that comparison should not be true, and it won’t go into that section of code erroneously.

Coises

@PeterJones said in Config Files Need Updating, Too:

it’s using the L_xxxx enumeration

Thank you. It appears (since of course updates could always happen without a plugin being updated) that I’ll need to find a way to determine what is an external lexer at run time (not just what would have been an external lexer when I compiled the plugin).

Lycan Thrope

@Coises ,
Glad you guys figured it out. I was really tired when testing this, and realized after I signed off and shut down the computer that I had already tested without WebTools, before I got impatient and removed all the plugins, since I started from the bottom alphabetically and was working to the top.

So the problem that was happening for me, was probably just the AutoIndent plugin, and I say probably because I can’t be sure the combo of it with another, possibly WebTools, couldn’t have been the culprit. I’d been up close to 21 hours when I shutdown and couldn’t force myself to sign back on. :-(

PeterJones

v2.0.1, with bugfix for @Coises “Access Violation” is released on GitHub. I have “paused” my nppPluginList submission, but will most likely submit 2.0.1 to the plugin list tomorrow, unless something else is discovered.

For those who want details:

Bugfix: Fix an “Access Violation” that occurs with specific condition of old `langs.xml` vs new `langs.model.xml` – when the model had `<Language name="blah"><Keywords ...></Language>` but the old `langs.xml` only had empty `<Language name="blah"/>`, it would cause the plugin to crash. The logic has been fixed so it properly copies over the new `<Keywords ...>` into the previously-empty `<Language>` element.

Coises

@Lycan-Thrope said in Config Files Need Updating, Too:

So the problem that was happening for me, was probably just the AutoIndent plugin, and I say probably because I can’t be sure the combo of it with another, possibly WebTools, couldn’t have been the culprit.

For what it’s worth, as the author of Controlled Auto-indent, I can guarantee it was the culprit. It could crash under other circumstances, too, having nothing to do with ConfigUpdater; I just hadn’t hit one of them, and if anyone else did before you, they didn’t report it.

A fixed version exists now.

Lycan Thrope

@Coises said in Config Files Need Updating, Too:

For what it’s worth, as the author of Controlled Auto-indent, I can guarantee it was the culprit. It could crash under other circumstances, too, having nothing to do with ConfigUpdater; I just hadn’t hit one of them, and if anyone else did before you, they didn’t report it.

I appreciate that, and I’ll go ahead and download it and test it against the old and new versions of ConfigUpdater. I’ve already downloaded, but not installed the new version of CU yet.

Update: It works fine under the old CU and the new CU. I tried it with CAI enabled and not enabled, and the CU ran through everything, so the crash condition from CAI appears to be gone. Glad I could help find that edge case, unknowingly. :-)