Anyone can help with this regex?

gerdb42

@mkupper Don’t feed these (AI-)Trolls. What Bio-Brain would dig up an 10-year old thread just to post some praise?

pbarney

@gerdb42 said in Anyone can help with this regex?:

@mkupper Don’t feed these (AI-)Trolls.

Dude. Look at my post history.

What Bio-Brain would dig up an 10-year old thread just to post some praise?

How about someone who does a search to find an answer instead of just posting a new question that might have been answered a dozen times before?

How about someone who appreciates the continually quality posts of someone who puts a lot of time in here to help people without a thought of reward?

Relax, Mr. hall monitor. There’s a reason that topics remain open; some questions and answers remain relevant for a long, long time.

guy038

Hello, @mkupper, @pbarney, @gerdb42 and All,

Oh, yes, @mkupper, your use of the (?-x:sub_expression) is quite interesting and I’ve never thought of such syntax, before !

(?x-i) # Mark shutdown/startup log lines
^[01][0-9]/[0-3][0-9]/20[0-9][0-9]\ [012][0-9]:[0-5][0-9]\ (?:
(?-x:Shut down.*\R+)|
(?-x:Start up.*\R+)|
(?-x:Logged in. Device was booted at (?'booted'[01][0-9]/[0-3][0-9]/20[0-9][0-9] [012][0-9]:[0-5][0-9]:[0-5][0-9])(?: adjusted to (?'adjusted'[01][0-9]/[0-3][0-9]/20[0-9][0-9] [012][0-9]:[0-5][0-9]:[0-5][0-9]))?\R)
)

Note that, in case there is only one or two chars, in each line of a multi-lines regex, to modify, you could use a composite regex, like below :

(?x-i) # 'RESPECT case' mode and 'FREE-spacing' mode :

         # Ignore any amount of NON-ESCAPED '\s' chars which lays OUTSIDE a CHARACTER CLASS
         # Ignore ANY text beginning with a NON-ESCAPED # character till the end of CURRENT line

# Mark shutdown/startup log lines
^
[01][0-9]/[0-3][0-9]/20[0-9][0-9]\ [012][0-9]:[0-5][0-9][ ]
(?:
  (Shut[ ]down.*\R+) |
  (Start\ up.*\R+)   |
  (?-x:Logged in. Device was booted at (?'booted'[01][0-9]/[0-3][0-9]/20[0-9][0-9] [012][0-9]:[0-5][0-9]:[0-5][0-9])(?: adjusted to (?'adjusted'[01][0-9]/[0-3][0-9]/20[0-9][0-9] [012][0-9]:[0-5][0-9]:[0-5][0-9]))?\R)
)

Best Regards,

guy038

mkupper

@guy038 said in Anyone can help with this regex?:

your use of the (?-x:sub_expression) is quite interesting and I’ve never thought of such syntax, before !

Something that puzzles me in the Boost manual is the first part of the Modifiers section which has

(?imsx-imsx … ) alters which of the perl modifiers are in effect within the pattern, changes take effect from the point that the block is first seen and extend to any enclosing ). Letters before a ‘-’ turn that perl modifier on, letters afterward, turn it off.

The thing that bugs me is the ... part and the words changes take effect from the point that the block is first seen and extend to any enclosing.

Can the space, dot-dot-dot, space supposed to be a sub-expression?

The syntax on the next line in the manual with (?imsx-imsx:pattern) applies the specified modifiers to pattern only. makes perfect sense as the colon is the delimiter. Is there a way to have a sub-expression or pattern when using (?imsx-imsx ... )?

I understand (?imsx-imsx) style sytax to turn flags on and off but why is space, dot-dot-dot, space in the manual?

guy038

Hi, @mkupper and All,

IMO, it’s probably a typo ! I suppose that it just means (?imsx-imsx: ... ) with anything after the colon till the ending parenthesis.

For example, I tested all the cases below, and indeed, the only correct syntax seems to be : (?i:pattern)

(?i!pattern)  => 'Find: Invalid Regular Expression' message
(?i"pattern)  => 'Find: Invalid Regular Expression' message
(?i#pattern)  => 'Find: Invalid Regular Expression' message
(?i$pattern)  => 'Find: Invalid Regular Expression' message
(?i%pattern)  => 'Find: Invalid Regular Expression' message
(?i&pattern)  => 'Find: Invalid Regular Expression' message
(?i'pattern)  => 'Find: Invalid Regular Expression' message
(?i(pattern)  => 'Find: Invalid Regular Expression' message
(?i)pattern)  => 'Find: Invalid Regular Expression' message
(?i*pattern)  => 'Find: Invalid Regular Expression' message
(?i+pattern)  => 'Find: Invalid Regular Expression' message
(?i,pattern)  => 'Find: Invalid Regular Expression' message
(?i.pattern)  => 'Find: Invalid Regular Expression' message
(?i-pattern)  => 'Find: Invalid Regular Expression' message
(?i/pattern)  => 'Find: Invalid Regular Expression' message
(?i0pattern)  => 'Find: Invalid Regular Expression' message

(?i:pattern)  =>  Match any string 'pattern' WHATEVER its case

(?i;pattern)  => 'Find: Invalid Regular Expression' message
(?i<pattern)  => 'Find: Invalid Regular Expression' message
(?i=pattern)  => 'Find: Invalid Regular Expression' message
(?i>pattern)  => 'Find: Invalid Regular Expression' message
(?i?pattern)  => 'Find: Invalid Regular Expression' message
(?i@pattern)  => 'Find: Invalid Regular Expression' message
(?iApattern)  => 'Find: Invalid Regular Expression' message
(?i[pattern)  => 'Find: Invalid Regular Expression' message
(?i\pattern)  => 'Find: Invalid Regular Expression' message
(?i]pattern)  => 'Find: Invalid Regular Expression' message
(?i^pattern)  => 'Find: Invalid Regular Expression' message
(?i_pattern)  => 'Find: Invalid Regular Expression' message
(?i`pattern)  => 'Find: Invalid Regular Expression' message
(?iapattern)  => 'Find: Invalid Regular Expression' message
(?i{pattern)  => 'Find: Invalid Regular Expression' message
(?i|pattern)  => 'Find: Invalid Regular Expression' message
(?i}pattern)  => 'Find: Invalid Regular Expression' message
(?i~pattern)  => 'Find: Invalid Regular Expression' message

Best Regards,

guy038

mkupper

@guy038 You may have some fun with (?P:...)

It’s not included in the documentation but is supported by Boost. https://stackoverflow.com/questions/10059673/named-regular-expression-group-pgroup-nameregexp-what-does-p-stand-for has a fascinating background.

I found that as I wondered if there were any valid flags other than [smix]. I also found that Boost does not care if you use a flag more than once. If a flag is both before and after the - then it’s turned off. Boost does not complain about (?-:...)

guy038

Hello, @mkupper and All,

Ah… OK. So I ran an other series of tests, below :

(?!:pattern)  =>  Search any empty string, NON followed with the string ':pattern')  => So, roughly, match any EMPTY string

(?":pattern)  =>  'Find Invalid Regular Expression' message

(?#:pattern)  =>  Search any empty string, followed with the comment ':pattern' )    => So, roughly, match any EMPTY string

(?$:pattern)  =>  'Find Invalid Regular Expression' message
(?%:pattern)  =>  'Find Invalid Regular Expression' message
(?&:pattern)  =>  'Find Invalid Regular Expression' message
(?':pattern)  =>  'Find Invalid Regular Expression' message
(?(:pattern)  =>  'Find Invalid Regular Expression' message
(?):pattern)  =>  'Find Invalid Regular Expression' message
(?*:pattern)  =>  'Find Invalid Regular Expression' message
(?+:pattern)  =>  'Find Invalid Regular Expression' message
(?,:pattern)  =>  'Find Invalid Regular Expression' message
(?.:pattern)  =>  'Find Invalid Regular Expression' message

(?-:pattern)  =>  Match any string 'pattern', according to the 'Match case' option 'ON' or 'OFF'

(?/:pattern)  =>  'Find Invalid Regular Expression' message
(?0:pattern)  =>  'Find Invalid Regular Expression' message
(?1:pattern)  =>  'Find Invalid Regular Expression' message
(?2:pattern)  =>  'Find Invalid Regular Expression' message
(?3:pattern)  =>  'Find Invalid Regular Expression' message
(?4:pattern)  =>  'Find Invalid Regular Expression' message
(?5:pattern)  =>  'Find Invalid Regular Expression' message
(?6:pattern)  =>  'Find Invalid Regular Expression' message
(?7:pattern)  =>  'Find Invalid Regular Expression' message
(?8:pattern)  =>  'Find Invalid Regular Expression' message
(?9:pattern)  =>  'Find Invalid Regular Expression' message

(?::pattern)  =>  Match any string ':pattern', according to the 'Match case' option 'ON' or 'OFF'

(?;:pattern)  =>  'Find Invalid Regular Expression' message
(?<:pattern)  =>  'Find Invalid Regular Expression' message
(?=:pattern)  =>  'Find Invalid Regular Expression' message

(?>:pattern)  =>  Match any ATOMIC string ':pattern', according to the 'Match case' option 'ON' or 'OFF'

(??:pattern)  =>  'Find Invalid Regular Expression' message
(?@:pattern)  =>  'Find Invalid Regular Expression' message
(?A:pattern)  =>  'Find Invalid Regular Expression' message
(?B:pattern)  =>  'Find Invalid Regular Expression' message
(?C:pattern)  =>  'Find Invalid Regular Expression' message
(?D:pattern)  =>  'Find Invalid Regular Expression' message
(?E:pattern)  =>  'Find Invalid Regular Expression' message
(?F:pattern)  =>  'Find Invalid Regular Expression' message
(?G:pattern)  =>  'Find Invalid Regular Expression' message
(?H:pattern)  =>  'Find Invalid Regular Expression' message
(?I:pattern)  =>  'Find Invalid Regular Expression' message
(?J:pattern)  =>  'Find Invalid Regular Expression' message
(?K:pattern)  =>  'Find Invalid Regular Expression' message
(?L:pattern)  =>  'Find Invalid Regular Expression' message
(?M:pattern)  =>  'Find Invalid Regular Expression' message
(?N:pattern)  =>  'Find Invalid Regular Expression' message
(?O:pattern)  =>  'Find Invalid Regular Expression' message

(?P:pattern)  =>  Match any string 'pattern', according to the 'Match case' option 'ON' or 'OFF'
(?Ppattern)   =>  

(?Q:pattern)  =>  'Find Invalid Regular Expression' message
(?R:pattern)  =>  'Find Invalid Regular Expression' message
(?S:pattern)  =>  'Find Invalid Regular Expression' message
(?T:pattern)  =>  'Find Invalid Regular Expression' message
(?U:pattern)  =>  'Find Invalid Regular Expression' message
(?V:pattern)  =>  'Find Invalid Regular Expression' message
(?W:pattern)  =>  'Find Invalid Regular Expression' message
(?C:pattern)  =>  'Find Invalid Regular Expression' message
(?Y:pattern)  =>  'Find Invalid Regular Expression' message
(?Z:pattern)  =>  'Find Invalid Regular Expression' message
(?[:pattern)  =>  'Find Invalid Regular Expression' message
(?\:pattern)  =>  'Find Invalid Regular Expression' message
(?]:pattern)  =>  'Find Invalid Regular Expression' message
(?^:pattern)  =>  'Find Invalid Regular Expression' message
(?_:pattern)  =>  'Find Invalid Regular Expression' message
(?`:pattern)  =>  'Find Invalid Regular Expression' message
(?a:pattern)  =>  'Find Invalid Regular Expression' message
(?b:pattern)  =>  'Find Invalid Regular Expression' message
(?c:pattern)  =>  'Find Invalid Regular Expression' message
(?d:pattern)  =>  'Find Invalid Regular Expression' message
(?e:pattern)  =>  'Find Invalid Regular Expression' message
(?f:pattern)  =>  'Find Invalid Regular Expression' message
(?g:pattern)  =>  'Find Invalid Regular Expression' message
(?h:pattern)  =>  'Find Invalid Regular Expression' message

(?i:pattern)  =>  Match any string 'pattern', AHTEVER its case

(?j:pattern)  =>  'Find Invalid Regular Expression' message
(?k:pattern)  =>  'Find Invalid Regular Expression' message
(?l:pattern)  =>  'Find Invalid Regular Expression' message

(?m:pattern)  =>  Match any string 'pattern', according to the 'Match case' option 'ON' or 'OFF'

(?n:pattern)  =>  'Find Invalid Regular Expression' message
(?o:pattern)  =>  'Find Invalid Regular Expression' message
(?p:pattern)  =>  'Find Invalid Regular Expression' message
(?q:pattern)  =>  'Find Invalid Regular Expression' message
(?r:pattern)  =>  'Find Invalid Regular Expression' message

(?s:pattern)  =>  Match any string 'pattern', according to the 'Match case' option 'ON' or 'OFF'

(?t:pattern)  =>  'Find Invalid Regular Expression' message
(?u:pattern)  =>  'Find Invalid Regular Expression' message
(?v:pattern)  =>  'Find Invalid Regular Expression' message
(?w:pattern)  =>  'Find Invalid Regular Expression' message

(?x:pattern)  =>  Match any string 'pattern', according to the 'Match case' option 'ON' or 'OFF'

(?y:pattern)  =>  'Find Invalid Regular Expression' message
(?z:pattern)  =>  'Find Invalid Regular Expression' message
(?{:pattern)  =>  'Find Invalid Regular Expression' message

(?|:pattern)  =>  Match any string ':pattern', according to the 'Match case' option 'ON' or 'OFF'

(?}:pattern)  =>  'Find Invalid Regular Expression' message
(?~:pattern)  =>  'Find Invalid Regular Expression' message

The syntaxes (?P<Name>Regex) and (?P=Name), described in your stackoverflow article, are NOT correct with the present Boost implementation within Notepad++

Refer to these two links :

https://www.regular-expressions.info/refext.html

https://www.regular-expressions.info/refreplacebackref.html

For each, once opened, select, if necessary, the Boost choice in the first drop-down list and the Python choice in the second drop-down list and compare… !

For instance, the regex (?P<Test>\d+) triggers the Invalid Regular Expression message, whereas the syntaxes (?<Test>\d+) or (?'Test'\d+) do find any NON-empty range of digits

On the same way, the regex (?<Test>\d+)ABC(?P=Test) is not valid, whereas the syntaxes (?<Test>\d+)ABC\g<Test> or (?-i)(?<Test>\d+)ABC\k<Test> do find any string ABC embedded by a same string of digits

Test my assumptions with the example text, below :

1ABC2345
123ABC123
12345ABC9
01ABC01234
ABC
12345ABC12345
123ABC456
6789ABC89

Note that the (?P:pattern) syntax, in the first part of this post, look like a (?P<Name>Regex) syntax, where the name part is just replaced by a colon ?!

With the example text above, see also the main difference between :

Searching with any of the 12 following regex syntaxes :
- (?-i)(?<Test>\d+)ABC\g{Test}
- (?-i)(?<Test>\d+)ABC\g<Test>
- (?-i)(?<Test>\d+)ABC\g'Test'
- (?-i)(?<Test>\d+)ABC\k{Test}
- (?-i)(?<Test>\d+)ABC\k<Test>
- (?-i)(?<Test>\d+)ABC\k'Test'
- (?-i)(?'Test'\d+)ABC\g{Test}
- (?-i)(?'Test'\d+)ABC\g<Test>
- (?-i)(?'Test'\d+)ABC\g'Test'
- (?-i)(?'Test'\d+)ABC\k{Test}
- (?-i)(?'Test'\d+)ABC\k<Test>
- (?-i)(?'Test'\d+)ABC\k'Test'
And searching with any of the 4 following regex ones :
- (?-i)(?<Test>\d+)ABC(?&Test)
- (?-i)(?<Test>\d+)ABC(?P>Test)
- (?-i)(?'Test'\d+)ABC(?&Test)
- (?-i)(?'Test'\d+)ABC(?P>Test)

In the first case, the last part of the regex, after the string ABC, is a back-reference to the present value of the named group Test
In the second case, the last part of the regex, after the string ABC, is a back-reference to the named group Test itself. so, these four regexes should match any line of my example text but the ABC string alone !

Remark : any reference to a named group must be case-sensitive. Otherwise, a Find: Invalid Regular expression message is returned !

In replacement, if you need to refer to a named group, you can use the $+{Test} syntax. However, note that it will always rewrite the value of named group Test when it was defined and not the last value of group Test !

Best Regards,

guy038

Alan Kilborn

@guy038 said:

In the first case, the last part of the regex, after the string ABC, is a back-reference to the present value of the named group Test

Thus, using the first regex (of the first case), (?-i)(?<Test>\d+)ABC\g{Test}, against the data on the sample line 1ABC2345, that line won’t be matched because the Test group captured 1 (for a match to occur, that data would have to start with 1ABC1).

In the second case, the last part of the regex, after the string ABC, is a back-reference to the named group Test itself

Using the first regex (of the second case), (?-i)(?<Test>\d+)ABC(?&Test), the sample line data, 1ABC2345, will be matched, because the instruction is to use the regex of the named group (\d+), not the captured data from the actual match (so any sequence of digits occurring before ABC and a sequence of any digits after).

Alan Kilborn

@guy038 said:

In replacement, if you need to refer to a named group, you can use the $+{Test} syntax. However, note that it will always rewrite the value of named group Test when it was defined and not the last value of group Test !

I suppose if you wanted to use the “last value of group Test” in the replacement, you could add a capture group, i.e.,

(?-i)(?<Test>\d+)ABC(?<foo>(?&Test))

and then $+{foo} would be available for use in the replacement string.

So, in the 1ABC2345 test line, $+{foo} would expand to 2345. (And $+{Test} would be 1.)

guy038

Hello, @alan-kilborn, and All,

Alan, you’ve just understood all my stuff quite correctly and even more regarding your last example with $+{Test} and $+{foo}, whose I did not think of !

Best Regards,

guy038