Want to delete everything like [xxx] including []

David Chiu

Thanks, Guy038,

I followed the instruction, but it does not work.

It finds no occurrence.

My sample text is copied and pasted below:

In a 2004 revision of headache classification, the term “Complicated migraine” was replaced by “Complications of migraine” [3]. The 2004 and 2013 revisions also reclassified some syndromes unique to children that historically were considered manifestations of migraine.

David Chiu

I just tried and experiment myself and found that if I use the following, it works. But i am not sure if it works for a large file size normally.

I use [\d+] in the Fine what zone. I am not sure what \20x, (?=.?$) for.

Scott Sumner

@David-Chiu

In asking a question here, you have to be careful to provide enough information to receive good help. @guy038 's solution works for your original data and not for your new example data because he was mislead by contraints on the context that were untrue.

That being said, modifying his “Find what” regex to \x20[\d+] will likely work for your new data (as well as the old). The translation into English of this regex is (loosely): find a space followed by a left bracket followed by an integer number (of one or more digits) followed by a right bracket. Replacing this with nothing deletes what was matched with the find.

David Chiu

Thanks Scott. Will provide more precise and enough information next time.

All is well now. Thank you all !

guy038

Hi David,

Ah, yes ! I supposed that the reference always ends your text. Moreover, I was mistaken about my previous regex. The correct syntax should have been, as below :

\x20\[\d+\](?=\.?$)

First, this regex looked for a space character, of Unicode code-point U+0032 ( = \x20, in hexadecimal ) Of course, I could have shortened it to a simple space character ( " " ), but it’s not easy to show that blank character, in posts !
Then, it searched for an opening square bracket, \[. As it’s a special regex character, it must be escaped with an anti-slash, \, in order to be taken, literally
After, it looked for a NON-empty range of digits \d+, as the + sign is a quantifier, which means from 1 to n times ( whatever n ), the previous element \d
Then it searched for an ending square bracket \], with the same remark as for the [ symbol
Finally, the overall match is true ONLY IF the condition (?=\.?$), called a positive look-ahead, is true. That condition means that, after the ending square bracket, the end of line $ must be reached, eventually preceded by a literal dot character, \.? ( Note that ? is also a quantifier, which means 0 or 1 time, the preceding element \.. Indeed, I thought that the ending dot could be absent from some of your lines !

Of course, if we decide not to be so restrictive, the correct search regex is, simply :

\[\d+\] , with a SPACE character, before the first antislash symbol

Cheers,

guy038

P.S.,

If you’re a newby, about regular expressions concept and syntax, begin with that article, in N++ Wiki :

http://docs.notepad-plus-plus.org/index.php/Regular_Expressions

In addition, you’ll find good documentation, about the new Boost C++ Regex library, v1.55.0 ( similar to the PERL Regular Common Expressions, v1.48.0 ), used by Notepad++, since its 6.0 version, at the TWO addresses below :

http://www.boost.org/doc/libs/1_48_0/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html

http://www.boost.org/doc/libs/1_48_0/libs/regex/doc/html/boost_regex/format/boost_format_syntax.html

The FIRST link explains the syntax, of regular expressions, in the SEARCH part
The SECOND link explains the syntax, of regular expressions, in the REPLACEMENT part

You may, also, look for valuable informations, on the sites, below :

http://www.regular-expressions.info

http://www.rexegg.com

http://perldoc.perl.org/perlre.html

David Chiu

Hi Guy038,

Thank you for your detailed explanation and I have visited some of your mentioned website. As I am a newbie, I do need some time.

The

\ [ \ d + \ ]

(Sorry I have to break the above code by space and if not, it does not show properly. I don’t know how to do like yours in coloured background.)

This works most closely for me, but then I noted some reference is like this [11,13] and [14-16]. And this expression dose not work for these reference quote.

Alan Kilborn

I, too, do not know how @guy038 obtains the red text in the light-red background here in this forum Community, but I would like to know how to do it myself!

@David-Chiu , you can match your new text with a regular expression of the form:

\x20\[\d+([,-]\d+)?\]

I suppose the next question will be something about how to do [11,12,13] but here is where the learning part comes in! Read about regular expressions on the reference sites @guy038 mentioned, and practice!

guy038

Hi, David and Alan,

See, below, the different ways to get emphasis and blocks of code :

*section in italic*                 =>        section in italic
**section in bold**             =>         section in bold
`section of code`                 =>       section of code

*section`of code` in italic* => section of code in italic
**section`of code` in bold** => section of code in bold

....This text needs to be
....indented with four spaces
....characters and preceded with
....a blank line, in order to be
....seen as a block of code

=>

This text needs to be
indented with FOUR spaces
characters and preceded with
a BLANK line,  in order to be
seen as a BLOCK of CODE

For full documentation, about Markdown syntax, refer to the link below :

http://daringfireball.net/projects/markdown/syntax

And, for emphasis consult the section :

http://daringfireball.net/projects/markdown/syntax#em

David, I succeeded to find out the right regex, in order to match the eight the references, below :

References [3] and [123] and [11,13] and [14-16]

References [10,14-16] and [3-15,20-42] and [3,8,12,17] and [1-3,12-18,20-30,43,57,60-70]

So :

SEARCH \x20\[(,?\d+(-\d+)?)+\]

REPLACE EMPTY

Note : I suppose that there is NOT any space character, inside the square brackets area !

Alan, thanks for helping David, with your regex \x20\[\d+([,-]\d+)?\]. Indeed, it matches the first four examples of reference, above :-) So, it should be OK for David ! However, it fails to match the last four types of reference. But, certainly, David doesn’t need these complicated references, anyway !

Cheers,

guy038

David Chiu

Hi Guy and Alan,

Thank you for your kind help. It is also easier to learn by studying your suggestion along with the web link reference.

\[(,?\d+(-\d+)?)+\] is the final one I needed as I noted there is not always a space in front of the reference quote. so I have to omit \x20

Thank you very much again.

Cheers
David

Alan Kilborn

@guy038

Thanks for the information on how to format posts here on this website. One thing I didn’t see in the documentation is how to separate normal text (not in a codeblock) with some extra whitespace. For example, if I want to put extra spaces between “a” and “b” here:

a b

So when I typed that line above I put a gob of spaces between the a and the b. But the preview pane (and when I submit the post, I imagine) simply shows “a b”…single space between. Is this type of extra whitespacing possible with some extra markup/markdown syntax?

guy038

Hello Alan,

To write consecutive spaces, in normal text of posts, on NodeBB N++ forum, I replace the common SPACE character ( \x{0020} ) by the NO-BREAK SPACE character ( \x{00A0} )

To write this character, at the current cursor location, TWO solutions :

Select the menu option Edit > Character Panel and double-click on the line, of decimal value 160
Hold down the ALT key and hit, successively, on the four NUMPAD keys 0, 1, 6 and 0, before releasing the ALT key

Remark :

As browsers don’t use, generally, monospaced fonts, the physical size of a “space” character family, is smaller than a letter or digit size ! Roughly, you need three consecutive “space” characters to get the same width than a word character !

An example :

TEST about the NodeBB displaying of the NO-BREAK SPACE character ( \x00A0 )

12345678901234567890 = A line with digits, without any SPACE character

12 45 78 01 34 67 90 = The same line, where six digits, have been replaced by a single SPACE character => Line shorter than the first one

12 45 78 01 34 67 90 = The same line, where six digits, have been replaced by three SPACE characters => Identical to the previous one

12 45 78 01 34 67 90 = The same line, where six digits, have been replaced by three NO-BREAK SPACE characters

=> This time, total spacing seem to be kept !

Best Regards,

guy038

Alan Kilborn

Hello Mr. Guy,

I think I see what you mean, although at first I didn’t. I was trying to type a literal \ followed by x followed by { … followed by } in the box I type in to make a post on this website. But…that didn’t work correctly in the Preview area.

Then it dawned on me that if I type my posting in Notepad++ FIRST (using the Character Panel method), then copy and paste it to the website, it works to make wide open spaces!

Thank you for your help.
AK