delete both duplicates regexp macro?
-
Hi, @patrickdrd, @terry-r and All,
So, if you do not need to give the initial order of your data, it’s quite easy !
Imagine, for instance, the initial text :
789 123 456 123 xyz 789 789 000 789 456 abc 123 123 456 hij 456 456 789 123 999 123Which gives, after lexicographically ascending sort :
000 123 123 123 123 123 123 456 456 456 456 456 789 789 789 789 789 999 abc hij xyz-
Now, just verify that, AFTER sort, the last line of your data is followed with a pure blank line
-
Then, use the regex S/R, below, which will delete any duplicated line, leaving isolated lines, only :
-
SEARCH
(?-s)^(.+\R)\1+ -
REPLACE
Leave EMPTY
-
=> You’ll get, as expected, the sorted list of the isolated lines :
000 999 abc hij xyz
Now, if you prefer to keep the initial order of your data list, I surely found correct regexes, in the past, to achieve such a task, but, I didn’t want to bother looking for where ;-))
So, thinking about a possible solution and having the results of the previous regex in front of me, everything became clear ! Don’t you see…?
-
First, copy in a new tab, your original list
-
Then, add a line with, let’s say, some equal signs
= -
Finally add the previous results ( that is to say, all the isolated lines, after sort and regex replacement ) !
So, we have the following text :
789 123 456 123 xyz 789 789 000 789 456 abc 123 123 456 hij 456 456 789 123 999 123 ====== 000 999 abc hij xyz-
Now, use the regex S/R, below, which will keep the isolated lines, only, in their initial order ;-)
-
SEARCH
(?-s)^(.*\R)(?s)(?!.*^=+.*^\1) -
REPLACE
Leave EMPTY
-
giving :
xyz 000 abc hij 999As you can see, these unique lines are listed, according to their initial location. Nice !
Notes :
-
The regex matches any line which cannot be found, further on, after the line
====== -
Note that when the regex engine reaches the string
======, this line, and the subsequent ones cannot be followed, further on, with a second line=======> The negative look-ahead returns TRUE. Consequently, the======line and all the sorted isolated lines, obtained in the first part of this post, are, also, deleted ;-))
Best Regards,
guy038
-
-
thanks for help guys,
I managed to complete my original task,
but now I’ve got another one,
which should be a bit more difficult:basically the files are two, I join them,
anyway, what I would like to do now is to find out
which lines of the first file exist in the second,
I tried with examdiff I use (trying to compare two sorted files),
but it didn’t return proper resultsimagine that the first file acts as a “whitelist” against the second file
-
@patrickdrd
@guy038 had a post (in response to a similar question). See:
https://notepad-plus-plus.org/community/topic/15436/subtract-document-b-from-a/4In this one the object was to remove duplicate lines. However you could use the same regex to “Mark” the line. Actually in the Mark function you would also tick “bookmark line”. This should identify all the lines in the first file (which is above the — line stated in that post. The second file would be below that line. Because you aren’t removing any lines the first file needs to have ONLY unique lines for the regex to correctly identify duplicates across the 2 files.
Have a go using that. Come back if issues arise. Please note that Notepad++ has issues with large files, so possibly read the remainder of that thread first.
Terry
-
so, which regexp should I use?
I tried with this one:
(?-s)^(.+)\R(?s)(?=.*\R\1\R?)
and it gives me 3 results only (I expected 7) and
how/where do I set bookmark colors in notepad++? -
ok I’ve found about the color here:
https://notepad-plus-plus.org/community/topic/12631/bookmark-line-color/2 -
@patrickdrd
that’s the regex I meant. Well if it’s found 3 then at least it works. If you are able to figure out the other 4 lines (you expected to get), then I’d suggest making a new file, copying those 4 lines, and their ‘duplicates’ from the second file and comparing them. To make it easier to compare, use the Show Symbol (under main menu View option). You can select all, or possibly just some of the options. Put 1 line from first file directly above it’s ‘duplicate’ from the second. I bet you will find a difference. It may only be a space, or possibly a tab in one vs a number of spaces in the other line, but there will be a difference.As for different bookmark colors, I know it can be done as @Scott_Sumner mentioned it recently, or rather he mentioned a different icon, so presumably a different colour is also possible. I suggest have a look through his posts. This can be done by selecting a poster (their name in blue), then in their profile page the right hand side lists posts going backwards in time, last at the top.
It’s bed time for me. Likely someone else will respond overnight if you are still having issues.
Good luck
Terry
-
this regexp is doing the job fine:
(?-s)^(.+)\R(?s)(?=.*\R\1\R?)
but as guy said, it doesn’t work with large (or kind of) files,
my file is 1-1,5mb (a bit over 50k records) and it doesn’t workanyway, I did it with excel vlookup function
-
Hi, All
Unfortunately, again, I verified that my previous method works, only, if file contents and/or number of lines processed are not too important :-(( In most cases, the regex engine ends up , matching, wrongly, all file contents. Too bad !
So, if you wish to keep the initial order of your file, here is, a new method to adopt, which covers all cases ( I hope so ! ), in order to keep/delete duplicate lines AND/OR all non-duplicate lines of a file, whatever its size !
Please, do any test, even on mportant files to verify that this method is robust and does not fail ! I’ll be glad to get your feedback :-))
So, let’s start with that sample text :
567890 1234 45 1234 xyz 567890 567890 000000000 567890 45 abcdef 1234 1234 45 hijk 45 45 567890 1234 999 1234-
Move the cursor at the beginning of the first item
567890 -
Open the Column editor (
Edit > Column Editor...) -
Insert a decimal sequence of numbers, ticking the
Leading zerosoption -
Delete the last isolated number
22
=>
01567890 021234 0345 041234 05xyz 06567890 07567890 08000000000 09567890 1045 11abcdef 121234 131234 1445 15hijk 1645 1745 18567890 191234 20999 211234-
Now, use the regex S/R, below, to swap the positions of data and numbers, where N is the number of digits, of the previous numbering, and to insert of a separation character ( I chose the
#character, but any individual char may suit, providing it’s not used in your data. Prefer a character which is not a meta-character used in regexes ! )-
SEARCH
^(?-s)^(\d{N})(.+) -
REPLACE
\2#\1
-
As, in our example, N =
2, it leads to the text :567890#01 1234#02 45#03 1234#04 xyz#05 567890#06 567890#07 000000000#08 567890#09 45#10 abcdef#11 1234#12 1234#13 45#14 hijk#15 45#16 45#17 567890#18 1234#19 999#20 1234#21- Then, execute a sort with the menu option
Edit > Line Operations > Sort Lines Lexicographically Ascending=>
000000000#08 1234#02 1234#04 1234#12 1234#13 1234#19 1234#21 45#03 45#10 45#14 45#16 45#17 567890#01 567890#06 567890#07 567890#09 567890#18 999#20 abcdef#11 hijk#15 xyz#05Important : Till the end of that post, this sorted text becomes the new sample text !
Now, here are the six regex S/R that cover all possible cases :
-
Regex A : SEARCH
(?-s)^(.+#).*\R(?:\1.*\R)+and REPLACELeave EMPTY -
Regex B : SEARCH
(?-s)^((.+#).*\R)(?:\2.*\R)+and REPLACE\1 -
Regex C : SEARCH
(?-s)^(.+#).*\R(\1.*\R)+and REPLACE\2 -
Regex D : SEARCH
(?-s)^(.+#).*\R(?:\1.*\R)+|.+\Rand REPLACE?1$0 -
Regex E : SEARCH
(?-s)^((.+#).*\R)(?:\2.*\R)+|.+\Rand REPLACE\1 -
Regex F : SEARCH
(?-s)^(.+#).*\R(\1.*\R)+|.+\Rand REPLACE\2
So, in a previously sorted file ( I insist ! ) and whatever the numbering after the
#symbol :-
If you want to delete all duplicate lines, only, use the regex
A -
If you want to keep isolated lines AND the first line of each block of duplicate lines, only, use the regex
B -
If you want to keep isolated lines AND the last line of each block of duplicate lines, only, use the regex
C -
If you want to delete isolated lines, only, use the regex
D -
If you want to keep the first line of each block of duplicate lines, only, use the regex
E -
If you want to keep the last line of each block of duplicate lines, only, use the regex
F
Here are, below, the results of these six regex S/R, against the sample text :
•----------------•----------------•----------------•----------------•----------------•----------------• | Regex A | Regex B | Regex C | Regex D | Regex E | Regex F | •----------------•----------------•----------------•----------------•----------------•----------------• | 000000000#08 | 000000000#08 | 000000000#08 | 1234#02 | 1234#02 | 1234#21 | | 999#20 | 1234#02 | 1234#21 | 1234#04 | 45#03 | 45#17 | | abcdef#11 | 45#03 | 45#17 | 1234#12 | 567890#01 | 567890#18 | | hijk#15 | 567890#01 | 567890#18 | 1234#13 | | | | xyz#05 | 999#20 | 999#20 | 1234#19 | | | | | abcdef#11 | abcdef#11 | 45#03 | | | | | hijk#15 | hijk#15 | 45#10 | | | | | xyz#05 | xyz#05 | 45#14 | | | | | | | 45#16 | | | | | | | 567890#01 | | | | | | | 567890#06 | | | | | | | 567890#07 | | | | | | | 567890#09 | | | •----------------•----------------•----------------•----------------•----------------•----------------•
-
Now, considering any of these
6results, just above, let’s swap, with the regex S/R, below, the two blocks of data, on either side of the#character-
SEARCH
^(?-s)^(.+)#(.+) -
REPLACE
\2#\1
-
We get the different cases, below :
•----------------•----------------•----------------•----------------•----------------•----------------• | Regex A | Regex B | Regex C | Regex D | Regex E | Regex F | •----------------•----------------•----------------•----------------•----------------•----------------• | 08#000000000 | 08#000000000 | 08#000000000 | 02#1234 | 02#1234 | 21#1234 | | 20#999 | 02#1234 | 21#1234 | 04#1234 | 03#45 | 17#45 | | 11#abcdef | 03#45 | 17#45 | 12#1234 | 01#567890 | 18#567890 | | 15#hijk | 01#567890 | 18#567890 | 13#1234 | | | | 05#xyz | 20#999 | 20#999 | 19#1234 | | | | | 11#abcdef | 11#abcdef | 03#45 | | | | | 15#hijk | 15#hijk | 10#45 | | | | | 05#xyz | 05#xyz | 14#45 | | | | | | | 16#45 | | | | | | | 01#567890 | | | | | | | 06#567890 | | | | | | | 07#567890 | | | | | | | 09#567890 | | | •----------------•----------------•----------------•----------------•----------------•----------------•- Considering any of these
6results, just above, perform, again, a sort, with the optionEdit > Line Operations > Sort Lines Lexicographically Ascending=>
•----------------•----------------•----------------•----------------•----------------•----------------• | Regex A | Regex B | Regex C | Regex D | Regex E | Regex F | •----------------•----------------•----------------•----------------•----------------•----------------• | 05#xyz | 01#567890 | 05#xyz | 01#567890 | 01#567890 | 17#45 | | 08#000000000 | 02#1234 | 08#000000000 | 02#1234 | 02#1234 | 18#567890 | | 11#abcdef | 03#45 | 11#abcdef | 03#45 | 03#45 | 21#1234 | | 15#hijk | 05#xyz | 15#hijk | 04#1234 | | | | 20#999 | 08#000000000 | 17#45 | 06#567890 | | | | | 11#abcdef | 18#567890 | 07#567890 | | | | | 15#hijk | 20#999 | 09#567890 | | | | | 20#999 | 21#1234 | 10#45 | | | | | | | 12#1234 | | | | | | | 13#1234 | | | | | | | 14#45 | | | | | | | 16#45 | | | | | | | 19#1234 | | | •----------------•----------------•----------------•----------------•----------------•----------------•-
Finally, let’s use this last regex S/R to get rid of all the counting marks
-
SEARCH
(?-s)^.+# -
REPLACE
Leave Empty
-
We obtain the
6final results, from the original text :•----------------•----------------•----------------•----------------•----------------•----------------• | Regex A | Regex B | Regex C | Regex D | Regex E | Regex F | •----------------•----------------•----------------•----------------•----------------•----------------• | xyz | 567890 | xyz | 567890 | 567890 | 45 | | 000000000 | 1234 | 000000000 | 1234 | 1234 | 567890 | | abcdef | 45 | abcdef | 45 | 45 | 1234 | | hijk | xyz | hijk | 1234 | | | | 999 | 000000000 | 45 | 567890 | | | | | abcdef | 567890 | 567890 | | | | | hijk | 999 | 567890 | | | | | 999 | 1234 | 45 | | | | | | | 1234 | | | | | | | 1234 | | | | | | | 45 | | | | | | | 45 | | | | | | | 1234 | | | •----------------•----------------•----------------•----------------•----------------•----------------•Remark : This method needs numerous steps, but is quite safe, because all the modifications, produced by the different S/R, concern one line at a time ( or a consecutive block of lines, in regexes A to F ! )
Of course, on huge files , execution time may be important, but you should get the expected results, at the end ;-))
Cheers,
guy038
-
-
thanks a lot for your effort, but too much fuss, isn’t it?
vlookup in excel is easier to do I think
-
@patrickdrd said:
thanks a lot for your effort, but too much fuss, isn’t it?
NOTHING is too much fuss for @guy038 ! :-D
-
@guy038 said:
the regex engine ends up , matching, wrongly, all file contents
As mentioned in this thread, this is in all likelihood caused by this problem.
-
(?-s)^(.+)\R(?s)(?=.*\R\1\R?)
doesn’t match the whole line,
e.g. it tells me that adobe.com exists, but I only have lines that end in adobe.com, e.g. get.adobe.com -
Hi, All,
Sorry for the delay, but I was busy with some garden work (hedge trimming !) and, of course, I also tested the 6 regex, from
AtoF, of my previous post !I used the following test file :
a#9999999999 a#9999999999 abcdefghij#9999999999 ......................... ......................... ..21524 IDENTICAL lines ( in totality ! ) ......................... ......................... abcdefghij#9999999999 z#9999999999 z#9999999999As you can see :
-
It begins with the
2identical linesa#9999999999 -
Then, followed with
21524identical linesabcdefghij#9999999999 -
And it finished with the
2identical linesz#9999999999, followed with a final line-break
So, I ran the regex C of my previous post, (
(?-s)^(.+#).*\R(\1.*\R)+), against this test file=> It correctly matched the
2lines, at beginning of file, then the21524identical lines ( => a selection of495,103characters ) and, the2lines at the end of the fileThen, I simply added
ONEadditional lineabcdefghij#9999999999to that file and ran the regex again. This time, it matched the2lines, at beginning of file, but wrongly grabbed all remaining text ( So the21525lines AND the2last lines ) !?To verify if the results depended of the size of the selection, I changed the test file,with lines of
140chars, as below :a#9999999999 a#9999999999 abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz#9999999999999999999999999999999999999999999999999999999999999999999999999999999999999 ......................... ......................... ..21524 IDENTICAL lines ( in totality ! ) ......................... ......................... abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz#9999999999999999999999999999999999999999999999999999999999999999999999999999999999999 z#9999999999 z#9999999999I was very surprised to see that results were exactly the same ( OK for
21524identical lines and KO for21525identical lines !!?? ) And yet, this time, the selection contained3,013,360chars !Of course, I did this test with all the other regexes. For example, with regex A, the limit is a bit higher :
25120lines. But again, after adding one more line, the regexAfailed :-((So, guys, if you don’t mind, I would like you to test the regex C , with the first test file, above, in order to verify if it is “laptop-dependent”. I means, may be, results are not pertinent with my weak Windows XP configuration !?
In the meanwhile , seemingly, we can conclude that, in a previously sorted file, a regular expression can handle, roughly, not more than
21,000identical lines, at a time ! I’d be glad to receive your feed-back in order to confirm or invalidate this fact :-))
Of course, I came to this temporary conclusion, after testing my 6 regexes, from
AtoF, against real text. I decided to take all contents of a novel, on the Gutenberg site. And…, as I’m French, my choice was, naturally, the novel “The count of Monte-Cristo” by Alexandre Dumas, that you may download from the link below:http://www.gutenberg.org/files/1184/1184-0.txt ( Choose the link “Raw text UTF-8” )
When I first tried to build a suitable sorted working file, in order to test my regexes, unfortunately, all failed :-(( But I also noticed, in that sorted file, that there were numerous lines
the#...... Indeed, if you download the novel, just count the occurrences of the regex\bthe\b=>28628occurrences of the article “the”. So I deleted all these consecutive occurrences of the word “the”. This time all my regexes worked as expected :-))However, note that, during my tests, I found out that my regexes
DtoFwere, initially, erroneous. So I changed them, and I already updated my previous post with the correct regexes !
With the help of that page, below, on the most common words in English :
https://en.wikipedia.org/wiki/Most_common_words_in_English
I verified, with the regex
\bWord\b, that, in this novel, the10most common words used, in the initial text, are :the 28,628 ( ABSENT in the SORTED file ) to 12,897 of 12,916 and 12,570 a 9,473 I 8,393 you 8,288 he 6,945 in 6,625 his 5,909So, we are sure that the
6regexes can, at least, manage files containing up to13,000consecutive identical lines !
Now, if some people is interested about the different steps, that I used to constitute a decent working file, for testing regexes
AtoF, just have a glance to the table, below :•------------------------------------•---------------•-----------------------------------------------------------------------------------------------------•-------------• | SEARCH | REPLACE | EXPLANATIONS | Occurrences | •------------------------------------•---------------•-----------------------------------------------------------------------------------------------------•-------------• | | | We delete, manually, from BEGINNING of file to the END of the CONTENTS part | | | | | | | | | | We delete, manually, from AFTER the FOOTNOTES part till the VERY END of file | | | | | | | | ,(?=\d) | EMPTY | We delete any COMMA separator in NUMBERS | 264 | | | | | | | [,;.] | \x20 | We change any punctuation END of a (part of) SENTENCE with a SPACE character | 72,423 | | | | | | | (?i)o’(?=clock) | of\x20the\x20 | We replace the "o’" CONTRACTIVE form with the COMPLETE form "of the " | 164 | | | | | | | (?i)’s|(?<!\w)’|’(?!\w) | EMPTY | We delete the "’s" string and any "’" sign NOT SURROUNDED with WORD chars | 2,754 | | | | | | | (?i)(d|l)’ | \1e\x20 | We change the "d’" and "l’" French CONTRACTIVE forms to, RESPECTIVELY, "de " and "le " | 311 | | | | | | | —|- | \x20 | We change any HYPHEN-MINUS character as well as the EM DASH char, with a SPACE character | 4,933 | | | | | | | [^\w’\r\n ] | \x20 | We ONLY keep WORD, SPACE, and EOL characters and the ’ sign( PRESENT in English CONTRACTIVE forms ) | 38,795 | | | | | | | (?-i)(?<=\s)(?=\w)[^aAIVX\d](?=\s) | \x20 | As ONE-char STRING, we ONLY keep article "A", "a", pronoun "I", DIGITS and ROMAN letters "V" , "X" | 1,151 | | | | | | | ^\h*\R|^\h+|\h+$|\h+(?=\h) | EMPTY | We delete PURE BLANK lines, TRIM spaces at START and END, and REDUCE to a ONE SPACE gap | 107,108 | | | | | | | \x20 ( > 1 mn ! ) | \r\n | Finally, we change any SINGLE SPACE character with a LINE BREAK | 419,769 | | | | | | | COLUMN editor, with LEADING zeros | | At LINE 1, COLUMN 1 | | | | | | | | (?-s)^(\d{6})(.+) | \2#\1 | We SWAP each WORD and its REFERENCE number | 464,233 | | | | | | | (?i)^the# | | We BOOKMARK all the LINES, containing the article "the", whatever its CASE | 28,529 | | | | | | | Bookmark > Cut Bookmarked Lines | | We BACKUP all these lines in an OTHER file, for FURTHER processing | | | | | | | | Sort lines Lexico... ASCENDING | | => A work SORTED file, encoded UTF-8 with BOM, of 5,861,424 BYTES, with 435,704 WORDS, ONE per line | | | | | | | •------------------------------------•---------------•-----------------------------------------------------------------------------------------------------•-------------•
Now, applying the regexes
AtoF, against the sorted file obtained, I got, after10sabout for each, the coherent results, below :•-------•---------------------------------------•----------•-------------•--------------• | Regex | SEARCH | REPLACE | Occurrences | LINES Number | •-------•---------------------------------------•----------•-------------•--------------• | | Work SORTED file, obtained, AFTER all the steps above : | 435,704 | •-------•---------------------------------------•----------•-------------•--------------• | | | | | | | A | (?-s)^(.+#).*\R(?:\1.*\R)+ | EMPTY | 10,818 | 6,861 | | | | | | | | B | (?-s)^((.+#).*\R)(?:\2.*\R)+ | \1 | 10,818 | 17,679 | | | | | | | | C | (?-s)^(.+#).*\R(\1.*\R)+ | \2 | 10,818 | 17,679 | | | | | | | | D | (?-s)^(.+#).*\R(?:\1.*\R)+|.+\R | ?1$0 | 17,679 | 428,843 | | | | | | | | E | (?-s)^((.+#).*\R)(?:\2.*\R)+|.+\R | \1 | 17,679 | 10,818 | | | | | | | | F | `(?-s)^(.+#).*\R(\1.*\R)+|.+\R | \2 | 17,679 | 10,818 | | | | | | | •-------•---------------------------------------•----------•-------------•--------------•It’s easy to verify that :
-
6,861lines, after regexA+428,843lines, after regexD=435,704( Total of the file ) -
6,861lines, after regexA, +10,818lines, after regexE=17,679lines, after regexB -
6,861lines, after regexA, +10,818lines, after regexF=17,679lines, after regexC
On the other hand :
-
The
10818occurrences of regexesA,BandCcorrespond to all the first/last duplicate lines, as after regexesEorF -
The
17,679occurrences of regexesD,EandFcorrespond to all first/last duplicate lines AND all the uniques lines, too, as after regexesBorC
Note also that :
-
With the
3regexesA,BandC, the unique lines, which must be kept, are,simply, not processed by the regexes -
With the
3regexesD,EandF, the unique lines, which must be deleted, are matched by the second alternative.+\Rof the regexes
So, guys, as I said, above, I’m looking for the results of your own tests, relative to the biggest block of consecutive identical lines, correctly handled by the six regexes
AtoF, above, and the test file, below :a#9999999999 a#9999999999 abcdefghij#9999999999 ) ..................... ) ..................... ) HOW MANY lines ? ( THANKS for testing !!) ..................... ) abcdefghij#9999999999 ] z#9999999999 z#9999999999Best Regards,
guy038
-
-
@guy038
off topic regarding garden work:
if your garden is as detailed and thorough as everything else you do, i’d gladly invite you to help me out in mine … the amount of daily magnolia leafs to collect is currently killing me this year and i’ve not been able to control my rakes and brooms with an adequate, repeatable regex ;-) -
(?-s)^(.+#).\R(\1.\R)+ doesn’t work for my case,
it doesn’t find any occurrences -
@guy038 said:
I’m looking for the results of your own tests, relative to the biggest block of consecutive identical lines, correctly handled by the six regexes A to F, above, and the test file, below
So it might be worth pointing out a good method for creating an arbitrary (i.e., large!) number of the
abcdefghij#9999999999lines in your request.Here’s what I would do:
- put caret on that line in a tab created for the purpose of testing this
- start macro recording
- press ctrl+d (to execute the Duplicate Current Line function)
- stop macro recording
- go to the Macro menu and choose Run a Macro Multiple Times…
- fill in the prompt box entries and press Run (to create the desired number of lines)
To see how many lines of this type you’ve currently got, simply do a literal Count search for
abcdefghij#9999999999. -
@guy038 said:
So, guys, if you don’t mind, I would like you to test the regex C , with the first test file, above, in order to verify if it is “laptop-dependent”. I means, may be, results are not pertinent with my weak Windows XP configuration !?
I did this and obtained exactly the same results as you did, @guy038. Specifically, OK with 21524 identical lines, and NOT OK with 21525 identical lines. I tried both the shorter and longer versions of those “middle” lines in the file. All this using Notepad++ 7.2.2, 32-bit. I doubt that any other (reasonable) version of Notepad++ will show different results.
-
Do you have more to say on this topic? I’m interested…
