pythonscript: any ready pyscript to replace one huge set of regex/ phrases with others?

Eko palypse

the script provided by @Alan-Kilborn uses the boost regex implementation from the PythonScript plugin, which, as you’ve already shown, is implemented differently than with npp.

Alan Kilborn

@Eko-palypse

Well that’s kinda what I was getting at by asking @guy038 that last question. I couldn’t tell from what he was saying if he was talking about the earlier script or if he had tried some real Python re.xxx functions for search and replace. Hence my question to him.

uses the boost regex implementation from the PythonScript plugin which is implemented differently than with npp

Is it truly, though? I always thought that it made calls back to whatever regex engine is in N++, but, hmmm, maybe not. Maybe I should check the source code. :)

Eko palypse

@Alan-Kilborn

From what I understand, yes, this is the case, it has the boost:regex engine implemented
https://github.com/bruderstein/PythonScript/blob/d54a2b434ec2b51f0dbacd3828fc36a20533c2dc/PythonScript/src/Replacer.cpp

guy038

Hi, @alan-kilborn, and All,

Alan, it’s just all the points, described in my previous post !

You can insert, either, in search and replacement regexes, characters, located outside the BMP, directly or with the syntax \x{HHHHHHHH}

From the text below :

🍬 = \x{1F36C}
🎂 = \x{1F382}
🎄 = \x{1F384}
🎅 = \x{1F385}
🎇 = \x{1F387}
🎺 = \x{1F3BA}
👼 = \x{1F47C}

with the Python regex engine, you can use :

SEARCH [\x{0001F36C}-\x{0001F47C}].+ or [\x{1F36C}-\x{1F47C}].+

REPLACE \x{1F385} = \\x{1F385}

So, with my modified script : @[\x{1F36C}-\x{1F47C}].+@\x{1F385} = \\x{1F385}@

and you get:

🎅 = \x{1F385}
🎅 = \x{1F385}
🎅 = \x{1F385}
🎅 = \x{1F385}
🎅 = \x{1F385}
🎅 = \x{1F385}
🎅 = \x{1F385}

For characters with code, above \x{FFFF}, you cannot do this kind of S/R with our Boost regex engine

The NUL character, \x{0000}, can be used, either, in search and replacement regexes

For instance, you can execute the following S/R, with the Python regex engine :

SEARCH [\x20-\x7f]

REPLACE $0\x00

giving for the script : @[\x20-\x7f]@$0\x00@

This S/R cannot be run with our Boost regex engine, which just deletes all the characters

The backward assertions, as, for instance, \A, seem correctly supported

Just imagine the text “This is a test” in a new N++ tab and the regex S/R :

SEARCH \A.

REPLACE -

So, in the script, the syntax @\A.@-@

With the Python regex engine, we get the correct text -his is a test ! With our Boost regex engine, after clicking on the Replace All button, we, wrongly, obtain the text -------------- :-((

The Look-behind assertions are correctly handled, even if it overlaps with the end of the previous match

Consider the text aaaabaaabaaa and the regex S/R :

SEARCH (?<=a)ba+

REPLACE 123a

=> the syntax @(?<=a)ba+@123a@, in the script

With the Python regex engine, the text is correctly modified as aaaa123a123a ( two S/R ) whereas, with the Boost regex engine, after clicking on the Replace All button, we get the wrong string aaaa123abaaa

Indeed, the second match never occurs, as it should have seen that the last char of replacement a was right before the baaa string, hence a second match :-((

Cheers,

guy038

Eko palypse

@guy038

are you really using the python regex engine?
This would mean you have some code like re.sub(pattern, repl, string, count=0, flags=0)
but the snippet you showed earlier uses editor.rereplace which is supposed to be the boost regex engine.

guy038

Hi, @eko-palypse, @alan-kilborn and All,

Huum…, I’m a bit confused ! When I mean : “With the Python regex engine…”, I’m just saying that I did all the tests with the Alan’s script, above, which does use the helper method editor.rereplace ! And, of course, the classical N++ Replace dialog, to compare with.

In fact, I’m already aware of this fact, as, some time ago, I noticed differences, while using Scott Sumner’s or Claudia frank’s Python scripts, which dealt, essentially, with searches ! As, this time, we have a nice search and replace script, I just verified that my assumptions were correct : the present behavior of the editor.rereplace method gives improved results and seems to fix some bugs of the current implementation of the Boost library, within Notepad++ :-))

But, I’m not a true coder ! So, unfortunately, it’s… up to all of you, to tell me why it’s looks better ;-))

Cheers,

guy038

Alan Kilborn

@Eko-palypse @guy038

So to clarify, when using the Pythonscript plugin, one can do 1 of 2 things:

editor.rereplace() which uses the Boost regex that is very similar to, but maybe not exactly the same as the one directly in N++
use re.sub() which uses the Python regex engine (which is its own thing, not Boost, not PCRE, not ANYTHING except Python’s own re module)

So far I believe everything discussed in this thread is using the FIRST one.

Alan Kilborn

@guy038 said:

When I (say) “With the Python regex engine…”, I’m just saying that I did all the tests with…Alan’s script

“With the Python regex engine” would be my SECOND bullet point above, but that is not what you’re doing unless you’ve changed the editor.rereplace() call in the script to a re.sub() call (and slightly changed the other logic to cope with that change).

BTW when you import re (to get access to the re.IGNORECASE aka re.I flag) that is all you are doing–getting access to that, which happens to be shared, for convenience, with the Boost regex engine.

Eko palypse

So from what I get is, that there is a difference in the implementation details of boost:regex in npp and pythonscript plugin.
So the best would be if the pythonscript plugin would implement the missing pieces and npp silently steals the code and
adapt it to have it work the same ;-)

Alan Kilborn

@guy038 said:

SEARCH \w+

REPLACE \u$0

AFAIK, they do not modify anything, ( I mean regarding case of characters ! ) when executed from a Python script :-((

Interesting. I noticed that the following variant on that above WILL work to affect case when using editor.rereplace() in a script:

Find: (\w+)
Repl: \U\1

It seems like either variant should capitalize all lowercase letters in a document. HOWEVER, only the script version does this! When run interactively with the Replace dialog in Notepad++, these 2 variants only capitalize the first letter of every “word”.

Can anyone offer an explanation for:

why Guy’s original regex replace does nothing in the script
why both of these regex replaces only change to uppercase the first letter of every “word” when run with N++ interactive replace (but – and I think act correctly in the script)

Alan Kilborn

@Alan-Kilborn said:

why both of these regex replaces only change to uppercase the first letter of every “word” when run with N++ interactive replace (but – and I think act correctly in the script)

Let me correct this:

why both of these regex replaces only change to uppercase the first letter of every “word” when run with N++ interactive replace (but the one that involves capturing group #1 and using \1 in the replace part – acts correctly in the script, at least I think it does)

Hmm, better but maybe still not a great way of expressing it. :-P

Eko palypse

@Alan-Kilborn

If I understand you correctly, I’m totally lost - my setup must have some kind of builtin wizard as
I do get different result. So just to clarify, having the text this is some text and aiming to get
THIS IS SOME TEXT we would use \w+ and replace with \U$0 or (\w+) with \U$1 as replacement.
For me, both work the same in the dialog and none work when called like editor.rereplace('\w+','\U$0') from a script.
But you do have a different result?

Alan Kilborn

@Eko-palypse

Wow. WOW. I find I cannot reproduce my earlier results. It seems to be working consistently now (duplicating your results). I guess I have egg on my face and sorry for the false alarm; unless it takes some sort of special sequence of actions to get into a weird mode! I did restart N++ an hour ago so I supposed that is a possible occurrence.

One thing I am seeing now that the editor.rereplace() is doing “nothing”:

I use the LocationNavigate plugin for its ability to specially mark changed lines (wish there was a better/more-current solution to that, btw!). When I run the scripted replace, although visually no text changes, the plugin does mark every line where \w+ matches. Basically this means all lines besides empty ones got “changed”. So…not really sure what under-the-hood voodoo magic is happening when using \U (and probably others like it) with a scripted replace, but it sure seems like SOMETHING interesting might be happening. If what is happening is that the \U is being ignored and abc is simply being replaced by abc perhaps that is not all that interesting. :(

Eko palypse

@Alan-Kilborn

:-) … live is interesting, isn’t it … what is true now might be false in the next minute :-)

From modify callback I see that there is a replace but it just ignores the \U

{'code': 2008, 'annotationLinesAdded': 0, 'text': 'this', 'modificationType': 1048576, 'token': 0, 'linesAdded': 0, 'length': 4, 'foldLevelPrev': 0, 'position': 0, 'line': 0, 'foldLevelNow': 0}
{'code': 2008, 'annotationLinesAdded': 0, 'text': 'is', 'modificationType': 1048576, 'token': 0, 'linesAdded': 0, 'length': 2, 'foldLevelPrev': 0, 'position': 5, 'line': 0, 'foldLevelNow': 0}
{'code': 2008, 'annotationLinesAdded': 0, 'text': 'some', 'modificationType': 1048576, 'token': 0, 'linesAdded': 0, 'length': 4, 'foldLevelPrev': 0, 'position': 8, 'line': 0, 'foldLevelNow': 0}
{'code': 2008, 'annotationLinesAdded': 0, 'text': 'text', 'modificationType': 1048576, 'token': 0, 'linesAdded': 0, 'length': 4, 'foldLevelPrev': 0, 'position': 13, 'line': 0, 'foldLevelNow': 0}

chcg

Added the script as https://github.com/bruderstein/PythonScript/blob/master/scripts/Samples/Multiples_SR.py

Alan Kilborn

@guy038

Since you pointed out that the Pythonscript editor.rereplace() way of working has some distinct advantages (less bugs?) over the Notepad++ interactive Replace dialog, how about a little script for making testing the differences even easier (and less cryptic than typing a one-liner in the PS console):

if editor.getSelectionEmpty():
    p1 = editor.getCurrentPos()
    p2 = editor.getTextLength() - 1
else:
    p1 = editor.getSelectionStart()
    p2 = editor.getSelectionEnd()
s = notepad.prompt('Enter search regex:', '', '')
if s != None and len(s) > 0:
    r = notepad.prompt('Enter replace regex:', '', '')
    if r != None:
        editor.beginUndoAction()
        editor.rereplace(s, r, 0, p1, p2)
        editor.endUndoAction()

If a selection is active when running the script, it acts like N++'s “Replace All…with In Selection ticked”. Otherwise, it acts like a normal N++'s “Replace All” acting on text from caret downward to EOF.

Not rocket science, but then again neither was the original script way above. :)

V S Rawat

how can I download all script at bruderstein/PythonScript/scripts/Samples/ as a single zip file?

Thanks.

Meta Chuh

@V-S-Rawat

how can I download all script at bruderstein/PythonScript/scripts/Samples/ as a single zip file?

you can do that by either downloading the whole master repo from >>> here <<< and extract PythonScript/scripts/Samples/,

… or by downloading them manually one by one, then package them into another zip and commit this zip to david @bruderstein , with the request for publishing, so that you can re-download it 😉

Eko palypse

… or by writing a python script doing it
@V-S-Rawat I leave the implementation of the compressing function to you ;-)

import urllib
import re

sample_url = "https://github.com/bruderstein/PythonScript/tree/master/scripts/Samples"
raw_url = "https://raw.githubusercontent.com/bruderstein/PythonScript/master/scripts/Samples/"
save_dir = r'D:\xyz\{}'

_f = urllib.urlopen(sample_url)
data = _f.read()
links = re.findall('href="(.*?\.py)"', data)
for link in links:
    file = link.rpartition('/')[2]
    urllib.urlretrieve(raw_url + file, save_dir.format(urllib.unquote(file)))

V S Rawat

@Eko-palypse

This script will run from within npp and will access net and download all *.py on that page?

Quite powerful. I never thought such a thing is even possible.

:-)

Thanks.