Delete lines in multiple text/DAT files that contain specific characters

Adam Bowsky

@supasillyass It worked for files that had 1 digit in front of the text. Some of the files have 2, 3, and 4 digits, EX:

11N90-SS9035X 00000000
311N90-SS9035X 00000000
6001N90-SS9035X 00000000

Unfortunately, I am not sure of what the switches do, or if there is a different variance I need to use.

\r\n[ ]*.N90-.*00000000$

Michael Vincent

How about:

\r\n\s+\d{1,4}N90-.*\s+00000000$

The \r\n matches a windows carriage return, line feed. If you’re not using Windows (CR/LF) but rather Unix (LF), just remove the ‘\r’.

The \s+ means match white space at least once but get as many as possible (you said there is preceding space on each line).

The \d{1,4} means match a digit at least once, but not more than 4 times - you said “Some of the files have 2, 3, and 4 digits”.

The N90- is self explanatory

The .* means match any character (.) or or more times (*).

The \s+ is spacing again before all the trailing '0’s, which themselves are self-explanatory.

Finally, the $ is stop at the end of the line.

Michael Vincent

Using PREGGER:

PS VinsWorldcom@:~> pregger "/\r\n\s+\d{1,4}N90-.*\s+00000000$/"
The regular expression:

(?-imsx:\r\n\s+\d{1,4}N90-.*\s+00000000$)

matches as follows:

NODE                     EXPLANATION
----------------------------------------------------------------------
(?-imsx:                 group, but do not capture (case-sensitive)
                         (with ^ and $ matching normally) (with . not
                         matching \n) (matching whitespace and #
                         normally):
----------------------------------------------------------------------
  \r                       '\r' (carriage return)
----------------------------------------------------------------------
  \n                       '\n' (newline)
----------------------------------------------------------------------
  \s+                      whitespace (\n, \r, \t, \f, and " ") (1 or
                           more times (matching the most amount
                           possible))
----------------------------------------------------------------------
  \d{1,4}                  digits (0-9) (between 1 and 4 times
                           (matching the most amount possible))
----------------------------------------------------------------------
  N90-                     'N90-'
----------------------------------------------------------------------
  .*                       any character except \n (0 or more times
                           (matching the most amount possible))
----------------------------------------------------------------------
  \s+                      whitespace (\n, \r, \t, \f, and " ") (1 or
                           more times (matching the most amount
                           possible))
----------------------------------------------------------------------
  00000000                 '00000000'
----------------------------------------------------------------------
  $                        before an optional \n, and the end of the
                           string
----------------------------------------------------------------------
)                        end of grouping
----------------------------------------------------------------------

PS VinsWorldcom@:~>

supasillyass

@Adam-Bowsky

The dot indicated matches a single character:

\r\n[ ]*.N90-.*00000000$
        ^

So change it to match a string of digits:

\r\n[ ]*[0-9]*N90-.*00000000$
        ^^^^^^

There’s also an edge case not matched where the first line has N90-, so follow up with: ^[ ]*[0-9]*N90-.*00000000\r\n

Adam Bowsky

@Michael-Vincent thank you! I believe this worked correctly. 1 question… “the match a digit at least once”… does this include preceding zeros? For example, if the line had looked like this: 00001N90-SS9035X? If so, would I change \d{1,4} to \d{1,5}?

Michael Vincent

@Adam-Bowsky said:

For example, if the line had looked like this: 00001N90-SS9035X? If so, would I change \d{1,4} to \d{1,5}?

It does not include preceding zeros by default. Zeros (0) are numbers (digits) so they would count towards the 4 maximum ( { …, 4} ). You’re correct in that if you had 4 leading zeros, then \d{1,5} would match it.

I like to be precise in my RegEx (as precise as possible) to not catch anything I shouldn’t. I’d rather be cautious than aggressive when doing a bulk replace like this. You could just use \d+ which would match at least 1 and as many digits in a row (similar to the \s+ we’ve been using).

Cheers.

Adam Bowsky

@supasillyass thanks!

Adam Bowsky

@Michael-Vincent thanks again!

Adam Bowsky

Re: Delete lines in multiple text/DAT files that contain specific characters

Hello,

I have been using this process since you were kind enough to help me, and just notices that I am running into a problem with this expression: \r\n\s+\d{1,4}N90-.*\s+00000000$. in addition to deleting the line that has the N90- with a , it is also deleting the line above it. For example, the line above was deleted in addition to the line that I wanted to delete. This is happening on every file where N90- is present. Do you have any idea why this is happening?

      10DTP-1040K           00000000  This should not have been deleted, but was.
      10N90-SS7784X         00000000 This was deleted correctly.

Adam Bowsky

@Michael-Vincent

Hello,

I have been using this process since you were kind enough to help me, and just notices that I am running into a problem with this expression: \r\n\s+\d{1,4}N90-.*\s+00000000$. in addition to deleting the line that has the N90- with a , it is also deleting the line above it. For example, the line above was deleted in addition to the line that I wanted to delete. This is happening on every file where N90- is present. Do you have any idea why this is happening?

  10DTP-1040K           00000000  This should not have been deleted, but was.
  10N90-SS7784X         00000000 This was deleted correctly.

guy038

Hello, @adam-bowsky, @michael-vincent, @supasillyass and All,

Personally, I would use the following regex S/R, which should work in all the discussed cases !

I simply assume that the N90- string, with this exact case, is preceded with, at least, one digit !

SEARCH (?-si)^\h*\d+N90-.*\R?

REPLACE Leave EMPTY

Of course, the Regular expression search mode is selected and the Wrap around option is ticked

Give a try !

I’ll give you some explanations when everything is right ;-))

Best Regards

guy038