Filter the data !!!

Ekopalypse

I understand the desire to see everything and would also welcome
if someone finds a solution, but right now I see two challenges.
If it were multiline search/replace textboxes, then inserting EOLs is possible.
How does Npp know that the inserted EOL should not be part of the search expression or replacement pattern?
If it is a kind of word wrapping, how can we make sure that it is wrapped at a reasonable position to avoid confusion?

Personally, I’d prefer that the incremental search

would be upgraded by regular expressions
automatically adjusts to the window width
provides a shortcut to easily switch to the editor and back again
and, pure optional but really nice to have, a regex-lexer which colors and check my regexes.

Alan Kilborn

@Ekopalypse said in Filter the data !!!:

How does Npp know that the inserted EOL should not be part of the search expression or replacement pattern?
If it is a kind of word wrapping, how can we make sure that it is wrapped at a reasonable position to avoid confusion?

Very good points.

I’d prefer that the incremental search…

Very good feature requests
However, I don’t think Incremental Search has mass appeal or is used very much in Notepad++.
I have no evidence for this, aside from I don’t recall any questions here about it before.

provides a shortcut to easily switch to the editor

I just press Esc
Not ideal because it closes the window, but it works.

Ekopalypse

@Alan-Kilborn

I just press Esc

That was my workaround too :-)

However, I don’t think Incremental Search has mass appeal or is used very much in Notepad++.

Maybe because of the lacking RE feature - but if it would get it then it would be really cool
as, beside from the normal find dialog, it updates its find location while typing.

Alan Kilborn

@Ekopalypse said in Filter the data !!!:

Maybe because of the lacking RE feature - but if it would get it then it would be really cool

Since it runs a search at every keystroke, performance problem on huge files?

it updates its find location while typing.

Hmm, thinking of typing .* into this window and having my caret immediately jump from where I was concentrating on my editing to now be at very end of file. :-)

Ekopalypse

@Alan-Kilborn

Since it runs a search at every keystroke, performance problem on huge files?

… yes but I would argue … don’t do it, use the find dialog instead :-)

my caret immediately jump from where I was concentrating

as this feature doesn’t exist yet it might be that it doesn’t do what you think it will do :-)
But I get your point, that would be, at least, confusing. :-D

Alan Kilborn

@Ekopalypse said in Filter the data !!!:

as this feature doesn’t exist yet it might be that it doesn’t do what you think it will do

So current implementation sets active selection to text matching incremental search data.
If you return to the editor, your caret is left at the end of the selected text (the end closer to end-of-file).
Default expectation is it would work same way if there was a regex mode.
Thus, my guess is that .* would leave one’s caret at end-of-file with everything above selected.
I supposed it would have to be (?s).* to be entirely correct.
But, yes, I guess Notepad++ devs could change how it logically works (i.e., leave caret at start of selection, closer to original caret pos)?

Alan Kilborn

@astrosofista said in Filter the data !!!:

implementation of a colored syntax to highligth groups and alternations at a glance - by the way, maybe I am not aware and this is currently feasible

I’m sure not quite what is being asked for, but here’s a curious little Pythonscript.

It takes a regex as its input and then highlights the current file according to the sections of the file that don’t match (yellow), and the overall match (left “uncolored”) and the capturing groups in the regex (group #1 = cyan, group #2 = orange, group #3 = purple, group #4 = dark-green, group #5 = red). Above group #5 I didn’t bother doing.

The reason I left the overall match (group #0) uncolored is that we’d have had overlapping colors that way, and I thought that would have made things less clear.

So if we take the text of the script itself:

# -*- coding: utf-8 -*-

# see https://community.notepad-plus-plus.org/topic/19240/filter-the-data

from Npp import editor, notepad

class T19240(object):
    def __init__(self):
        indic_list = [ 23, 25, 24, 22, 21, 31 ]
        for i in indic_list: editor.setIndicatorCurrent(i); editor.indicatorClearRange(0, editor.getTextLength())
        regex = r'(?-s)(notepad|editor)\.(.*?)\(.*?\)'
        regex = notepad.prompt('Enter regex (just Cancel to clear colors from previous run):', '', regex)
        if regex == None or len(regex) == 0: return
        def fill(indic, start_pos, end_pos): editor.setIndicatorCurrent(indic); editor.indicatorFillRange(start_pos, end_pos - start_pos)
        self.remember = 0
        def match_fn(m):
            fill(indic_list[0], self.remember, m.span(0)[0])
            self.remember = m.span(0)[1]
            for grp in range(len(m.groups()) + 1):
                #print(grp, '->', m.span(grp), m.group(grp))
                if 0 < grp <= 5: fill(indic_list[grp], m.span(grp)[0], m.span(grp)[1])
        editor.research(regex, match_fn)
        fill(indic_list[0], self.remember, editor.getTextLength())

if __name__ == '__main__': T19240()

and we run the script on that, and accept the suggested regex, we get:

guy038

Hello, @alan-kilborn and All,

I tested your Python script : Works nice :-)

I noticed that the id of styles 1 to 5 are in reverse order, giving their names !

So :

Mark   Style 1  = 25
Mark   Style 2  = 24
Mark   Style 3  = 23
Mark   Style 4  = 22
Mark   Style 5  = 21

Find Mark Style = 31

I also noted that the first indicator, of the indic_list, is the color with highlights parts of text which do not match the user regex

Personally, I preferred that this specific color was the Find Mark style, which allows me to wipe out the color of all non-matched parts, using the Clear all marks button of the Mark dialog !

And to clear the different highlighting groups, I just use the Remove style > Clear all Styles option, of the Context menu !

Now, Alan, would it be possible to show the $0 group, with the kind of highlighting, in the picture below :

Just a suggestion, of course ! Only if interested and if you get some spare time !

Best Regards,

guy038

P.S. :

I know, I abuse, but would it also be possible to easily modify the border color of that $0 group ?

Alan Kilborn

@guy038 said in Filter the data !!!:

with the kind of highlighting, in the picture below

Yes! That’s a better idea.
Of course, since you’ve already shown what it looks like, I wonder how you did that; maybe you already wrote the code!? :-)

Alan Kilborn

It took me a bit to figure out how to do the boxing, but thanks to this OLD THREAD I see how to get it going. Update to be posted soon!

guy038

Hi, @alan-kilborn and All,

No, sorry, Alan ! I wish I could create such a Python script like that ;-)) I simply used paint.exe and added a red rectangular box around specific zones of a screenshot picture ! Moreover you can notice that, for 2 of the $0 occurrences which are distributed on two lines, I drew two rectangles whereas, by script, there will be certainly only one zone!

I posted this request about the $0 group because I remembered the old post you mentioned in your last post. But I was a bit lazy and I’ve given up to find where it could be, on our forum. However, I was sure it has been created by @scott-sumner or @claudia-frank !

Therefore, as a first step, I preferred to omit this precious link. I just assumed you would not have any particular problem with this kind of highlighting ! So, sorry for letting you do this research on your own :-(

Cheers,

guy038

Fake Trum

Hello everyone. I sincerely thank everyone for supporting me. And this is how I did:

Because my files are very big, but it’s similar to what I posted so I shortened them with the Plugin Remove Duplicate line
Next I delete the blank lines and Indent all
Next remove the first <div><div> with the command: ^<div><div>
And continue to use the command: <div><div>.* —> Remove the characters after <div><div> and itself.
And finally use the command: .{90}.+(\R?\N|\n|$) -> Remove lines with more than 90 characters: Such as this line: There is a grandtotal of <span id=“stats_s1” style=“font-weight:bold;”>27,018,552,748</span> user hash requests made to this database, <span id=“stats_s2” style=“font-weight:bold;”>180,510,988</span> are of unique hashes (about <span id=“stats_s3” style=“font-weight:bold;”>0%</span> of grandtotal). Out of the grandtotal number of requests, <span id=“stats_s4” style=“font-weight:bold;”>26,403,484,047</span> were successful or cracked (about <span id=“stats_s5” style=“font-weight:bold;”>97%</span>). Regardingly only unique hashes, <span id=“stats_s6” style=“font-weight:bold;”>144,717,104</span> were successful or cracked (about <span id=“stats_s7” style=“font-weight:bold;”>80%</span>). </p>
Because it is not the same, it is impossible to eliminate duplicate lines. And I have the results I need.

Alan Kilborn

@guy038

Second version of script with desired change (mainly boxing the entire match; doing nothing with non-matching text):

# -*- coding: utf-8 -*-

# see https://community.notepad-plus-plus.org/topic/19240/filter-the-data
# see https://community.notepad-plus-plus.org/topic/14501/has-a-plugin-like-sublime-plugin-brackethighlighter

from Npp import editor, notepad, INDICATORSTYLE

class T19240a(object):

    def __init__(self):
        free_indicator_to_use = 17
        self.indicator_set_options(free_indicator_to_use, INDICATORSTYLE.STRAIGHTBOX, (238,121,159), 0, 255, True)
        indic_list = [ free_indicator_to_use, 25, 24, 23, 22, 21, 31, 29, 28 ]
        for i in indic_list: self.clear_all(i)
        regex = r'(?-s)(notepad|editor)\.(.*?)\(.*?\)'
        regex = notepad.prompt('Enter regex (just Cancel to clear colors from previous run):', '', regex)
        if regex == None or len(regex) == 0: return
        def match_fn(m):
            for grp in range(len(m.groups()) + 1):
                #print('{g} -> {s} |{text}|'.format(g=grp, s=m.span(grp), text=m.group(grp)))
                if grp < len(indic_list):  # we only have a finite number of colors but we could have more groups than that
                    if m.span(grp)[0] != m.span(grp)[1]:  # don't bother with zero-length groups; or groups not matched: (-1, -1)
                        self.fill(indic_list[grp], m.span(grp)[0], m.span(grp)[1])
        editor.research(regex, match_fn)

    def fill(self, indic, start_pos, end_pos):
        editor.setIndicatorCurrent(indic)
        editor.indicatorFillRange(start_pos, end_pos - start_pos)

    def clear_all(self, indic):
        editor.setIndicatorCurrent(indic)
        editor.indicatorClearRange(0, editor.getTextLength())

    def indicator_set_options(self, indicator_number, indicator_style, rgb_color_tup, alpha, outline_alpha, draw_under_text):
        for ed in (editor1, editor2):
            ed.indicSetStyle(indicator_number, indicator_style)       # e.g. INDICATORSTYLE.ROUNDBOX
            ed.indicSetFore(indicator_number, rgb_color_tup)
            ed.indicSetAlpha(indicator_number, alpha)                 # integer
            ed.indicSetOutlineAlpha(indicator_number, outline_alpha)  # integer
            ed.indicSetUnder(indicator_number, draw_under_text)       # boolean

if __name__ == '__main__': T19240a()

@Fake-Trum Sorry for hijacking your thread a bit.

guy038

Hello, @alan-kilborn and All,

Many thanks for your second try ;-)) As for me, I preferred to slightly color all the group0 zones ! So I used an alpha transparency of 50 instead of 0

Here is a regex which enables the 8 possible highlightings :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(?x)   # Start of Regex   #              Number group         Name of Style         Indicator
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 1        Mark Style 1                 25
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 2        Mark Style 2                 24
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 3        Mark Style 3                 23
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 4        Mark Style 4                 22
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 5        Mark Style 5                 21
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 6        Find Mark Style              31
(\l[\l\r\n]+)\h+\d+\h+    #                 Group 7        Smart Highlighting           29
(\l[\l\r\n]+)             #                 Group 8        Incremental highlight all    28
                          # End of Regex
Color = (240,128,160) , Alpha = 40 , Outline Alpha = 255 , StraightBox Style            17
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Tested against the text below :

abcde
fghij   012345  abcde
fghij   012345  abcde
fghij   012345  abcde
fghij   012345  abcdefg
hij   012345  abc
defghij   012345  abc
defghij   012345  abc
defghij

If you click on the ¶ button to visualize all characters, it’s great to see that highlighting goes also over the LF and CR chars and that the straight box embeds them, either, when a group contains line-break(s) ;-))

Now, we already have a default regex, with the line regex = r'.............' But, Allan (and this is my last request, I promise !), could you add the automatic assignment of the current selection to the regex variable ?

I mean something like :

If no current main *selection THEN regex = notepad.prompt... ELSE regex = current selection ( without any dialog )

TIA,

Cheers,

guy038

Alan Kilborn

@guy038 said in Filter the data !!!:

Alan (and this is my last request, I promise !), could you add the automatic assignment of the current selection to the regex variable ?

Remember, you promised!

Here’s the “b” version:

# -*- coding: utf-8 -*-

# see https://community.notepad-plus-plus.org/topic/19240/filter-the-data
# see https://community.notepad-plus-plus.org/topic/14501/has-a-plugin-like-sublime-plugin-brackethighlighter

from Npp import editor, notepad, INDICATORSTYLE

class T19240b(object):

    def __init__(self):
        free_indicator_to_use = 17
        self.indicator_set_options(free_indicator_to_use, INDICATORSTYLE.STRAIGHTBOX, (240,128,160), 40, 255, True)
        indic_list = [ free_indicator_to_use, 25, 24, 23, 22, 21, 31, 29, 28 ]
        for i in indic_list: self.clear_all(i)
        if editor.getSelectionEmpty():
            regex = r'(?-s)(notepad|editor)\.(.*?)\(.*?\)'  # a regex just for demo purposes
            regex = notepad.prompt('Enter regex (just Cancel to clear colors from previous run):', '', regex)
        else:
            regex = editor.getSelText()
        if regex == None or len(regex) == 0: return
        def match_fn(m):
            for grp in range(len(m.groups()) + 1):
                #print('{g} -> {s} |{text}|'.format(g=grp, s=m.span(grp), text=m.group(grp)))
                if grp < len(indic_list):  # we only have a finite number of colors but we could have more groups than that
                    if m.span(grp)[0] != m.span(grp)[1]:  # don't bother with zero-length groups; or groups not matched: (-1, -1)
                        self.fill(indic_list[grp], m.span(grp)[0], m.span(grp)[1])
        editor.research(regex, match_fn)

    def fill(self, indic, start_pos, end_pos):
        editor.setIndicatorCurrent(indic)
        editor.indicatorFillRange(start_pos, end_pos - start_pos)

    def clear_all(self, indic):
        editor.setIndicatorCurrent(indic)
        editor.indicatorClearRange(0, editor.getTextLength())

    def indicator_set_options(self, indicator_number, indicator_style, rgb_color_tup, alpha, outline_alpha, draw_under_text):
        for ed in (editor1, editor2):
            ed.indicSetStyle(indicator_number, indicator_style)       # e.g. INDICATORSTYLE.ROUNDBOX
            ed.indicSetFore(indicator_number, rgb_color_tup)
            ed.indicSetAlpha(indicator_number, alpha)                 # integer
            ed.indicSetOutlineAlpha(indicator_number, outline_alpha)  # integer
            ed.indicSetUnder(indicator_number, draw_under_text)       # boolean

if __name__ == '__main__': T19240b()

guy038

Hi, @Alan-kilborn and All,

Alan, this version is just perfect ! Up to now, when building a complicated search regex, containing some groups, I was used to type in this regex, in the Replace dialog, to clearly see the contents of each group :

REPLACE \r\n>$1<\r\n>$2<\r\n>$3<\r\n>$4<\r\n>$5<\r\n......>$n<\r\n

Now, with your script :

Select the regex where you want to notice the different groups, from 1 to 8, as well as the overall match $0 , for each occurrence, in current file
Execute the last version of your Python script, that I renamed Groups_Highlighter.py, BTW ;-))

Much more elegant, isn’t it ?

Best Regards

guy038

P.S. : Two more points :

Out of curiosity, what means, exactly, the syntax T19240 ?
I tried to change the draw_under_text value from True to False. But I did not see any difference ?!

Thanks, again, Alan, for this valuable script :-))

Alan Kilborn

@guy038

I renamed Groups_Highlighter.py

I called my copy ColorizeRegex.py but to each his own!

what means, exactly, the syntax T19240 ?

It’s the topic id of this thread in the forum! :-)
This is a Peter-ism. :-)

tried to change the draw_under_text value from True to False. But I did not see any difference ?!

Not sure, it was in the code I stole from the earlier referenced thread, about bracket-highlighting.
I don’t think I fully follow the DOCS about it, either.

Alan Kilborn

@guy038

Of course, with this new script, aren’t we somewhat reinventing a four-year-old WHEEL ??

I’m sure Peter will be scanning your tabs in your screenshot HERE looking for interesting things. :-)

guy038

Hi, @alan-kilborn,

Yes, I also remember the @claudia-frank’s regex_tester script However it does not behave the same way than your script !

As far as I can remember, it just used two colors for two consecutive groups + a third color for the overall match. So, if your regex contained, for instance, 3 groups => groups 1 and 3 were highlighted with the first color, the group 2 with the second color and the overall regex/occurrence with the third color !

And I think that your script, with a different color for each group, is quite interesting, too !

Ah… too late, I promised ! I just forgot the case when two $0 regexes are consecutive. then the straight-boxes are joined and no separation appears to show where the boundary between the two occurrences, is !

I will survive this ;-))

BR

guy038

Alan Kilborn

@guy038 said in Filter the data !!!:

Ah… too late, I promised ! I just forgot the case when two $0 regexes are consecutive. then the straight-boxes are joined and no separation appears

It’s a critical bug, not a new feature request. I will work on it.