Community
    • Login

    [v.7.8.6] Vertical Edge Settings no longer works with Split Lines (Ctrl-I)

    Scheduled Pinned Locked Moved Help wanted · · · – – – · · ·
    30 Posts 8 Posters 4.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Michael VincentM
      Michael Vincent @Matthew Au
      last edited by

      @Matthew-Au said in [v.7.8.6] Vertical Edge Settings no longer works with Split Lines (Ctrl-I):

      And shall I raise this as an issue in N++ Github

      Yes please. And reference / link this discussion please.

      @Matthew-Au said in [v.7.8.6] Vertical Edge Settings no longer works with Split Lines (Ctrl-I):

      Can this issue be workaround via GUI?

      I didn’t notice this because I use NppExec to run a startup script (as soon as N++ launches) and among other things, it force sets Edge Line mode and column 80. I added it after this new release that changed the way vertical edge was done. I hadn’t noticed your issue since I was always forcing Edge Line mode.

      Cheers.

      1 Reply Last reply Reply Quote 1
      • Matthew AuM
        Matthew Au
        last edited by

        @Ekopalypse Thanks, the “background mode” does the job (for now).

        @Alan-Kilborn I’ve submitted a bug report here.

        1 Reply Last reply Reply Quote 2
        • guy038G
          guy038
          last edited by guy038

          Hello, @matthew-au, @michael-Vincent, @ekopalypse and All,

          I fully understand the problem ! In order to get the Split Lines feature to work, here is my work-around :

          • Open the Settings > Preferences... > Editing > Vertical Edge Settings option

          • If the window contains several column numbers, delete all these numbers

          • Now, type in an unique column number where you want the lines to be splitted

          • Tick the Background mode option ( IMPORTANT )

          • If preferred, you can untick this option, immediately !

          • Now the Ctrl + I feature should be fucntional, as soon as a selection have been made, whatever the Background or Line mode is chosen ;-))

          • If you want, you may rewrite all your previous column numbers

          • But, beware that any subsequent Ctrl + I operation will refer to the unique number noticed while ticking the Background mode option !!

          Here is my debug info :

          Notepad++ v7.8.6   (32-bit)
          Build time : Apr 18 2020 - 22:32:17
          Path : D:\@@\786\notepad++.exe
          Admin mode : OFF
          Local Conf mode : ON
          OS Name : Microsoft Windows XP (32-bit) 
          OS Build : 2600.0
          Plugins : Explorer.dll mimeTools.dll NppConverter.dll NppExport.dll 
          

          Best Regards

          guy038

          Alan KilbornA EkopalypseE 2 Replies Last reply Reply Quote 2
          • Alan KilbornA
            Alan Kilborn @guy038
            last edited by

            @guy038 said in [v.7.8.6] Vertical Edge Settings no longer works with Split Lines (Ctrl-I):

            beware that any subsequent Ctrl + I operation will refer to the unique number noticed while ticking the Background mode option !!

            Hidden feature!! :-)

            1 Reply Last reply Reply Quote 0
            • EkopalypseE
              Ekopalypse @guy038
              last edited by

              @guy038 but works only as long as you don’t restart npp, correct?

              1 Reply Last reply Reply Quote 1
              • guy038G
                guy038
                last edited by guy038

                Hi, @matthew-au, @michael-Vincent, @ekopalypse, @alan-kilborn and All,

                @ekopalypse, Ah yes ! As soon as I restarted Notepad++, it simply showed the two edge lines that I had previously set ( 30 and 60 )

                However, remember that, by default, if no vertical setting or several vertical settings are set, then the CTRL + I feature splits lines, roughly, to the windows text width !

                Cheers,

                guy038

                1 Reply Last reply Reply Quote 1
                • guy038G
                  guy038
                  last edited by guy038

                  Hello, @matthew-au, @michael-Vincent, @ekopalypse, @alan-kilborn and All,

                  The last N++ v7.8.6 version now supports the new Vertical Multi-Edge lines feature. Unfortunately, as a consequence, this definitively breaks the native Split Lines feature ( Ctrl + I )

                  A work-around has been found but needs to choose one column number only and tick once on the Background mode option ! But this prevent you from easily using multiple vertical lines, which is a pity :-(

                  So, I imagined a regex S/R, that exactly simulates the N++ Split Lines feature ;-))

                  Just one constraint : If your text contains some tabulation chars, you must run, first, the Edit > BLank Operations > TAB to Space option, in order to change any tab character with the appropriate number of space chars. Indeed, the regex S/R assumes that each character displayed takes the place of exactly one character. !

                  The generic regex S/R, for any splitting column C is :

                  SEARCH (?-s)^(?=.{C})(.{1,C-3}\x20|.{C-1})\K

                  REPLACE \r\n    ( or \n if Unix files )

                  So, let’s suppose that you want to split text, at column C = 80. In that case, the regex S/R must be changed as below :

                  • SEARCH (?-s)^(?=.{80})(.{1,77}\x20|.{79})\K

                  • REPLACE \r\n    ( or \n if Unix files )

                  • Tick the Wrap around option

                  • Select the Regular expression search mode

                  • CLick on Replace All button, exclusively ( Do not use the Replace button ! )


                  After numerous tests, I verified that the split texts are strictly identical :

                  • Whatever the Split Lines option ( Ctrl + I ) or the Regex S/R is used

                  • Whatever the In selection option is set or not, in the Replace dialog

                  • Whatever the Line or Background mode is used, in Settings > Preferences... > Editing > Vertical Edge Settings

                  • Whatever the View > Word wrap option is set or not

                  • Whatever the View > Show Symbol > Show All Characters option is set or not

                  • Whatever the current font used is a MonoSpace or a Proportional font, in the Style Configurator...

                  In case of a proportional font, do not trust the visual vertical edge line, but rely on the real column, indicated in Settings > Preferences... > Editing > Vertical Edge Settings ! BTW, the Line mode is generally recommended for monospace fonts and the Background mode should be preferred for proportional fonts !


                  As a test, we’ll simply use the License.txt file and split its contents at column 80 :

                  • First of all, make sure that the single number 80 is shown in Settings > Preferences... > Editing > Vertical Edge Settings

                  • Copy the License.txt file in two new tabs ( new 1 and new 2 )

                  • In the new 1 file :

                    • Ctrl + A

                    • Ctrl + I ( Split Lines option )

                  • In the new 2 file :

                    • Open the Replace dialog ( Ctrl + H )

                      • SEARCH (?-s)^(?=.{80})(.{1,77}\x20|.{79})\K

                      • REPLACE \r\n    ( or \n if Unix files )

                      • Tick the Wrap around option

                      • Select the Regular expression search mode

                      • Click on Replace All button, exclusively ( Do not use the Replace button ! )

                  • Now, compare the two tabs with, for instance, the Compare plugin or with an external compare tool => The two tabs should be strictly identical ;-))

                  Remark : Of course, this regex S/R supposed that the splitting vertical line was at position 80. So, adapt the generic regex, above, according to the real column needed !

                  Best Regards,

                  guy038

                  Alan KilbornA 1 Reply Last reply Reply Quote 3
                  • Alan KilbornA
                    Alan Kilborn
                    last edited by

                    Seems to be relevant to this current discussion: https://github.com/notepad-plus-plus/notepad-plus-plus/issues/7814

                    1 Reply Last reply Reply Quote 2
                    • Alan KilbornA
                      Alan Kilborn @guy038
                      last edited by

                      @guy038

                      Any reason for the capturing group usage?:

                      0389f62c-6ef5-4e32-b7c0-646a2b3ef5ff-image.png

                      1 Reply Last reply Reply Quote 0
                      • guy038G
                        guy038
                        last edited by guy038

                        Hi, @alan-kilborn and All,

                        You’re perfectly right about it : No need of a capturing group for that purpose ! So, the generic search regex can be changed as below :

                        SEARCH (?-s)^(?=.{C})(?:.{1,C-3}\x20|.{C-1})\K

                        And the corresponding search regex for C = 80 is :

                        SEARCH (?-s)^(?=.{80})(?:.{1,77}\x20|.{79})\K

                        Indeed, although the maximum of characters, caught in group 1, not exceeds, either, C-2 or C-1 chars, the fact of using a non-capturing group should speed up the replacement process, in case of huge files !

                        Cheers,

                        guy038

                        1 Reply Last reply Reply Quote 2
                        • Patrick SheppardP
                          Patrick Sheppard
                          last edited by

                          Not sure this is worth a new thread … I used the following NppExec / Scintilla script to set the vertical edge column to the current column (super useful in my usage). It is now broken. Any recommendations for how to fix is appreciated. I did try what I thought was the obvious update and it didn’t work…

                          ::NPXEdgeColumSetToCurrent
                          NPP_CONSOLE ?
                          SCI_SENDMSG SCI_SETEDGECOLUMN $(CURRENT_COLUMN)

                          Michael VincentM 1 Reply Last reply Reply Quote 1
                          • Michael VincentM
                            Michael Vincent @Patrick Sheppard
                            last edited by

                            @Patrick-Sheppard said in [v.7.8.6] Vertical Edge Settings no longer works with Split Lines (Ctrl-I):

                            It is now broken

                            What version of Notepad++ - please post your debug info (menu ? => Debug Info…). I’ll assume you’re using the new 7.8.6 version as that is an easy fix. As of N++ 7.8.6, the vertical edge mode changed to multiedge by default so you can add multiple edges. You can try:

                            SCI_SENDMSG SCI_GETEDGEMODE
                            ================ READY ================
                            ECHO $(MSG_RESULT)
                            1
                            

                            to verify. I’m assuming you’ll get back “3” as in EDGE_MULTILINE. You can modify your script to be:

                            ::NPXEdgeColumSetToCurrent
                            NPP_CONSOLE ?
                            SCI_SENDMSG SCI_SETEDGEMODE EDGE_LINE
                            SCI_SENDMSG SCI_SETEDGECOLUMN $(CURRENT_COLUMN)
                            

                            Cheers.

                            1 Reply Last reply Reply Quote 4
                            • Patrick SheppardP
                              Patrick Sheppard
                              last edited by

                              Thanks, Michael.

                              I had downgraded to 7.8.5 because of this issue and was reluctant to jump back up, but I just did and your modification works a charm.

                              Appreciated.

                              1 Reply Last reply Reply Quote 2
                              • guy038G
                                guy038
                                last edited by guy038

                                Hello, @matthew-au, @i-neuw, @michael-Vincent, @ekopalypse, @alan-kilborn, @peterjones, @terry-r and All,

                                I revisited my previous posts of that discussion about the new Vertical Multi-Edge lines feature !

                                First, when I said :

                                A work-around has been found but needs to choose one column number only and tick once on the Background mode option !

                                I want to insist that the fact of ticking on the Background mode option, then unticking it, is needed to update the sole edge boundary value, displayed ! Even with the last 7.9.0 N++ version, this step is necessary !


                                Now, I did some additional tests, on, both, the final version of my regex and the native Split Lines N++ feature ( Ctrl + I ), using the license.txt file !

                                • Using my regex S/R method, to split the lines, we get the same result :

                                  • Whatever the Line or Background mode is used, in Settings > Preferences... > Editing > Vertical Edge Settings

                                  • Whatever the View > Word wrap option is set or not

                                  • Whatever the View > Show Symbol > Show All Characters option is set or not

                                  • Whatever the current font used is a MonoSpaced or a Proportional font, in the Style Configurator...

                                provided that you previously ran the Edit > BLank Operations > TAB to Space option if your file contains some TAB characters !


                                • Using the native Edit > Line Operations > Split Lines feature, we get the same result

                                  • Whatever the Line or Background mode is used, in Settings > Preferences... > Editing > Vertical Edge Settings

                                  • Whatever the View > Word wrap option is set or not


                                But, unlike what I said in my first post, the results of the Ctrl + I feature are totally different depending on whether :

                                • The View > Show Symbol > Show All Characters option is set or not

                                • The current font used is a Monospaced or a Proportional font, in the Style Configurator...


                                So, regarding my previous argumentation, my regex method and the native Split Lines N++ feature give the same results ONLY IF :

                                • A monospaced font is currently used

                                • The EOL symbol ( CRLF ) is not displayed

                                • The column number is superior to a minimum of about 15 for normal text. When I say “normal”, I refer, for instance, to the license.txt text, from line 28 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 till the end of file !

                                Note also that, with these hypotheses, the splitting operation of a selection of lines with, both, the regex S/R and the native Split Lines feature gives the same text contents !


                                IMPORTANT : My regex S/R is built in order to exactly replace the native Split Lines N++ feature, with the hypotheses above. But, of course, you may decide to not follow this rule and use, instead, a more simple search regex as, for instance :

                                SEARCH (?-s)^.{75,}?\K\x20+

                                REPLACE \r\n

                                which would split lines, roughly, after 80 characters

                                Best Regards,

                                guy038

                                1 Reply Last reply Reply Quote 2
                                • Michael AldenM
                                  Michael Alden
                                  last edited by Michael Alden

                                  Posting this in case it’s useful to anyone else. I worked around this issue using this plugin: dail8859/LuaScript: Notepad++ plugin for Lua scripting capabilities. Specifically, I added this code to my Lua startup script.

                                  -- Lua function for Scintilla colors
                                  local function RGB(red, green, blue)
                                      return red | green << 8 | blue << 16
                                  end
                                  
                                  -- Teal color value same as default used in Notepad++
                                  local COLOR_TEAL = RGB(128, 255, 255)
                                  
                                  -- Set line mode to EDGE_Line at 80 characters with teal color
                                  npp.SendEditor(SCI_SETEDGEMODE, EDGE_LINE)
                                  npp.SendEditor(SCI_SETEDGECOLUMN, 80)
                                  npp.SendEditor(SCI_SETEDGECOLOUR, COLOR_TEAL)
                                  

                                  So, every time Notepad++ starts it resets the column marker. This has the same affect as if one were to toggle the “Background mode” setting.

                                  Alan KilbornA 1 Reply Last reply Reply Quote 2
                                  • Alan KilbornA
                                    Alan Kilborn @Michael Alden
                                    last edited by

                                    @Michael-Alden

                                    Thanks for your contribution.
                                    It is a Lua variation on @Michael-Vincent 's original NppExec solution.
                                    There hasn’t been a Pythonscript implementation, so I’ll add that now:

                                    editor.setEdgeMode(1)
                                    editor.setEdgeColumn(80)
                                    
                                    Michael VincentM 1 Reply Last reply Reply Quote 2
                                    • Michael VincentM
                                      Michael Vincent @Alan Kilborn
                                      last edited by Michael Vincent

                                      @Alan-Kilborn said in [v.7.8.6] Vertical Edge Settings no longer works with Split Lines (Ctrl-I):

                                      Pythonscript implementation

                                      And of course “PerlScript”:

                                          editor->setEdgeMode( $SC_EDGEMODE{EDGE_LINE} );
                                          editor->setEdgeColumn(80);
                                      

                                      Cheers.

                                      1 Reply Last reply Reply Quote 2
                                      • Alan KilbornA
                                        Alan Kilborn
                                        last edited by

                                        Cross-linking: https://community.notepad-plus-plus.org/topic/20581/restore-right-margin-word-wrap-as-in-7-8-5

                                        1 Reply Last reply Reply Quote 2
                                        • dinkumoilD
                                          dinkumoil @Matthew Au
                                          last edited by dinkumoil

                                          @Matthew-Au @rd4gh @Alan-Kilborn @Michael-Vincent and all

                                          Since this is the older thread I will drop my two cents here.

                                          Notepad++ v7.8.6 introduced support for drawing multiple vertical lines (also called “edges”) inside of an editor window. But this new feature is not simply an extension of the old well-known single-edge-line feature, instead it is a completely new edge mode that replaced the old one. Unfortunately this broke the ability to word-wrap a document’s content at such an edge line (using the standard keyboard shortcut Ctrl+I).

                                          In the following I provide some scripts for the NppExec plugin to get back the old single-edge-line feature and being able to control it. Additionally I provide a fixed implementation of the related “word-wrap at single-edge-line” feature. That’s because I became aware that Notepad++'s internal implementation of this feature has two bugs:

                                          1. If the font size of the line numbers margin is set to a different value than the font size for documents, the “word-wrap at single-edge-line” code calculates a wrong wrapping position. This position has to be provided in pixels. To calculate this pixel value, a Scintilla function has to be called that calculates the width in pixels of a provided string from a provided text style. It seems like Notepad++'s internal code erroneously takes the text style of the line numbers margin font when calling this Scintilla function.

                                          2. To generate the template string for the pixel calculation mentioned above, it is necessary to query the set column number of the single-edge-line. Since column numbers in Scintilla are 0-based, the retrieved result has to be incremented by 1 to get the required length of the template string. It seems Notepad++'s internal code doesn’t do that because when word-wrapping a line that has a word boundary exactly at the single-edge-line it wraps this line at the beginning of that word instead at its end.

                                          Here are the scripts. Most of them could be assigned to a keyboard shortcut using Shortcut Mapper.

                                          Initialize Single-Edge-Line Mode

                                          ::SetSingleEdgeLine
                                          npp_console keep
                                          sci_sendmsg SCI_SETEDGECOLUMN 80
                                          sci_sendmsg SCI_SETEDGEMODE EDGE_LINE
                                          

                                          This script is intended to be used as a NppExec startup-script. It sets the single-edge-line column to column 80 and activates single-edge-line mode. It is able to override a multiple-edge-line or background-color-edge mode set in Notepad++ preferences dialog.

                                          Change Single-Edge-Line Column

                                          ::ConfigSingleEdgeLine
                                          npp_console keep
                                          sci_sendmsg SCI_GETEDGECOLUMN
                                          inputbox "Input edge column" : "Edge column" : $(MSG_RESULT)
                                          sci_sendmsg SCI_SETEDGECOLUMN $(INPUT)
                                          sci_sendmsg SCI_SETEDGEMODE EDGE_LINE
                                          

                                          This script opens an input box where users can change the single-edge-line column. The current column is shown as default value. When the user closes the box, the provided value is set as the new column and single-edge-line mode is activated.

                                          Turn on Single-Edge-Line Mode

                                          ::SingleEdgeLineOn
                                          npp_console keep
                                          sci_sendmsg SCI_SETEDGEMODE EDGE_LINE
                                          

                                          This script activates single-edge-line mode with its current settings.

                                          Turn on Multiple-Edge-Line Mode

                                          ::MultipleEdgeLinesOn
                                          npp_console keep
                                          sci_sendmsg SCI_SETEDGEMODE EDGE_MULTILINE
                                          

                                          This script activates multiple-edge-line mode with its current settings.

                                          Turn on Backgound-Color-Edge Mode

                                          ::BackgroundEdgeOn
                                          npp_console keep
                                          sci_sendmsg SCI_SETEDGEMODE EDGE_BACKGROUND
                                          

                                          This script activates background-color-edge mode with its current settings.

                                          Turn all Edges off

                                          ::EdgesOff
                                          npp_console keep
                                          sci_sendmsg SCI_SETEDGEMODE EDGE_NONE
                                          

                                          This script deactivates all edges.

                                          Word-Wrap Selected Text at Single-Edge-Line

                                          ::WrapSelectedLinesAtEdge
                                          npp_console keep
                                          
                                          set local $(EdgeModeSingleLine) ~ EDGE_LINE
                                          sci_sendmsg SCI_GETEDGEMODE
                                          
                                          if $(MSG_RESULT) != $(EdgeModeSingleLine) then
                                            set local $(LinePixelWidth) = 0
                                            goto :DoWrap
                                          endif
                                            
                                          sci_sendmsg SCI_GETEDGECOLUMN
                                          set local $(LineCharWidth) ~ $(MSG_RESULT) + 1
                                          
                                          set local $(TemplateStr) = W
                                          set local $(Cnt) = 2
                                          
                                          :ForLoopStart
                                            if $(Cnt) > $(LineCharWidth) goto :ForLoopEnd
                                            set local $(TemplateStr) = $(TemplateStr)W
                                            set local $(Cnt) ~ $(Cnt) + 1
                                          goto :ForLoopStart
                                          
                                          :ForLoopEnd
                                          sci_sendmsg SCI_TEXTWIDTH STYLE_DEFAULT "$(TemplateStr)"
                                          set local $(LinePixelWidth) = $(MSG_RESULT)
                                          
                                          :DoWrap
                                          sci_sendmsg SCI_TARGETFROMSELECTION
                                          sci_sendmsg SCI_LINESSPLIT $(LinePixelWidth)
                                          

                                          This script provides a fixed version of the “word-wrap at single-edge-line” feature. As the original one, it word-wraps at the right edit window border if edge mode is not set to single line. This script could be assigned to the Ctrl+I keyboard shortcut in order to replace the buggy built-in version of Notepad++.

                                          Alan KilbornA 1 Reply Last reply Reply Quote 4
                                          • guy038G
                                            guy038
                                            last edited by guy038

                                            Hello, @dinkumoil and All,

                                            Very interesting insight and solutions about the new multiple vertical edges and word-wrapping at a specific position …and, incidentally, some good and short examples of the NppExec scripting language ;-))

                                            One question :

                                            When trying to find out a regex emulation of the Ctrl + I feature, some months ago, I realized that some mandatory conditions were needed to get the expected behaviour. Refer to the middle part of this post

                                            • So, did you verify the behaviour of your last ::WrapSelectedLinesAtEdge script in these three cases :

                                            • A proportional font is used instead of the monospaced one ?

                                            • The EOL symbol is displayed, with the View > Show Symbol > Show End of Line or View > Show Symbol > Show All Characters options

                                            • The current file contains some tabulation characters, as the number of pixels used by a TAB char is generally different from the space character !

                                            Indeed, the Ctrl + I behaviour, with a single edge, seemed broken when one of these cases occur !

                                            Best Regards,

                                            guy038

                                            dinkumoilD 1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post
                                            The Community of users of the Notepad++ text editor.
                                            Powered by NodeBB | Contributors