Copy From one text file and Paste it on another Text File using Regex

Ohm Dios

@Terry-R Thanks for Your Response. But Removing unwanted lines in Text file 2 will not solve this . Acually its like inserting that bookmarked lines in text file 1 to text file 2. I am able to bookmark multiple lines using regex from to and copied that book mark in text file 1. then when pasting that copied bookmark line in text file will create more lines example each blue highlighted creates one set of copy in text file 2. notepad++_LI.jpg .Please find attached Image You will get my Point of Requirement. The second file Paragraph is different. So only text between Start 1, Start 2…End to be copied from file 1 to 2.

Terry R

@Ohm-Dios said in Copy From one text file and Paste it on another Text File using Regex:

But Removing unwanted lines in Text file 2 will not solve this

You never said that file 2 already contained text. However that makes little difference as the file 2 I suggest creating will ONLY contain file 1 data. Process it as I suggest. Once you have removed the unmarked lines you can copy the remainder of the file to YOUR original file 2. That is unless you have other requirements which you have not mentioned.

It would seem from looking at your previous problems that you have problems understanding or at least responding with information that is useful in helping you. You do need to provide good examples, preferably by including them as text not images. If you still find my solution is missing something you need to provide that data as text (in black boxes by using the </> button). This helps by allowing us to work on the data as you see it

Terry

Ohm Dios

@Terry-R Okay Let me explain Now. Two Text Files Both has Content in it. Text-file-1 and Text-file-2 has paragraph . Each paragraph has Starting Tag with number and all paragraph has same ending Tag. BUT Text-file-2 Has ONLY PARAGRAPH Starting Tag and END Tag without content. Text-File-1 has with content. So now need to copy that paragraph content from Text-file-1 and keep the other text of text-file-2 as it is.

START 1
Para 1 line
Para 1 line 2
Para 1 Line 3
Para 1 line 4
END

SOME TEXT PARA 
SOME TEXT PARA SOME TEXT PARA SOME TEXT PARA 
SOME TEXT PARA SOME TEXT PARA SOME TEXT PARA 
SOME TEXT PARA SOME TEXT PARA SOME TEXT PARA 
SOME TEXT PARA SOME TEXT PARA SOME TEXT PARA 




START 2
Para 2 line
Para 2 line 2
Para 2 Line 3
Para 2 line 4
END

START 1




END

THIS PARA IF DIFFERENT IN TEXT FILE 2 THIS PARA IF DIFFERENT IN TEXT FILE 2
THIS PARA IF DIFFERENT IN TEXT FILE 2
THIS PARA IF DIFFERENT IN TEXT FILE 2 THIS PARA IF DIFFERENT IN TEXT FILE 2

START 2




END

The Result Needed NOTE: The content between END and START 2 is same as Text-file-2

START 1
Para 1 line
Para 1 line 2
Para 1 Line 3
Para 1 line 4
END

THIS PARA IF DIFFERENT IN TEXT FILE 2 THIS PARA IF DIFFERENT IN TEXT FILE 2
THIS PARA IF DIFFERENT IN TEXT FILE 2
THIS PARA IF DIFFERENT IN TEXT FILE 2 THIS PARA IF DIFFERENT IN TEXT FILE 2

START 2
Para 2 line
Para 2 line 2
Para 2 Line 3
Para 2 line 4
END

guy038

Hello, @ohm-dios, @terry-r and All,

One more point to be clarified : Do the START # ..........END areas in File_2 contain as many blank lines as the number of lines in the START # ..........END areas of File_1, like below ?

  In File_1 :                 in File_2 :

START 1                       START 1
Para 1 line 1                              
Para 1 line 2                              
Para 1 line 3                              
Para 1 line 4                              
END                           END
.......                       .......
.......                       .......
.......                       .......
START 2                       START 2
Para 2 Line 1                              
END                           END
.......                       .......
.......                       .......
.......                       .......
.......                       .......
START #3                      START #3
Para 3 Line 1                              
Para 3 Line 2                              
Para 3 Line 3                              
Para 3 Line 4                              
Para 3 Line 5
Para 3 Line 6                              
END                           END
.......                       .......
.......                       .......
START #4                      START #4
Para 4 Line 1                              
Para 4 Line 2                              
Para 4 Line 3                              
END                           END

I don’t see an obvious solution to your problem , right now but I guess that, if you answer YES to my question, it should be more easy to implement something !

Best Regards,

guy038

P.S. :

Of course, I understand that the zones, outside the paragraph START # ............ END areas, contain different text and/or different number of lines !

Robin Cruise

very good topic , hard to get an answer of this. Especially when it comes to replace in other files.

Ohm Dios

@guy038 YES, START # …END areas in File_2 are same as File_1. As per your example its 100% correct if File_1 START 1…END 4 line then File_2 also has 4 blank lines. Same for START 3 6lines means both 6 Lines.
Thanks.

Terry R

@Ohm-Dios said in Copy From one text file and Paste it on another Text File using Regex:

So now need to copy that paragraph content from Text-file-1 and keep the other text of text-file-2 as it is.

This is turning out to be quite a complicated (not difficult) process. I have managed to get it down to 8 major steps. Each step builds on the previous step and further changes the text ready for the next step. All steps involving regexes mean the search mode MUST be “regular expression”. The cursor should be at the very start of which ever file is being processed before each step is run. The regexes search for “START” and “END”, not “Start”, “start”, “End” or “end” or any other combination. If this is not correct then alterations to the regex are required.

So the steps are:

Combine sets of lines in both files to become 1 line. the START/END sequence are combined to 1 line. All the “inbetween” lines are also combined into 1 line together with any additional empty/blank lines before and after.
Replace Function (perform this on file 1 and file 2):
Find What:(?-i)(END\R)|(\R(?!START))
Replace With:(?1\1)(?2%%)
The %% is used as a flag for where carriage return/line feeds need to be recreated in the last step. If %% is a likely character string within the text this can be changed to any other string such as #@ or @& as examples. This change would need to be made in step 8 as well as this step.
Remove unwanted lines in file 1.
Mark Function:
Find What:(?-is)^START.+
Have “Bookmark line” ticked
After “Mark All” has been clicked the lines to keep will be “marked” with the blue circle (default icon). To remove the unwanted lines use the “remove unmarked lines” option in “Search”, “Bookmark” menu.
Number the lines in file 2. Then move number to end of line.
Use the “Column Editor” function, first insert text, use the @ character. Use the Column editor again, this time with “number to insert”, initial number is 1, increase by 1 and tick “leading zeros.”
Next use Replace function:
Find What:(?-s)^(\d+)@(.+)
Replace With:\2@\1
Copy file 1 lines to file 2 (insert anywhere, but possibly after last line in file 2) and “sort lines lexicographically ascending”. This is under the "Line Operations, under the Edit menu.
Replace empty start/end set with the new ones keeping the original number at end of line.
Replace function:
Find What:(?-is)^START.+@(\d+)\R(START.+)$
Replace With:\2@\1
Move number to start of line.
Replace function:
Find What:(?-s)^(.+)@(\d+)$
Replace With:\2@\1
Sort lines as integer ascending. This is under the "Line Operations, under the Edit menu.
Remove number and recreate the CR/LFs.
Replace function:
Find What:(?-s)^\d+@|(%%)
Replace With:(?1\r\n)

Hopefully at this point you have the result you expected. I tested on a small scale and it worked as I expected it to.

Terry

guy038

Hi, @ohm-dios, @terry-r and All,

I’ve got a solution which may not work if your files are too big or contains a huge number of lines :-( Just try it out !

Here is the road map :

First copy the File_2.txt contents ( with empty paragraphs ) in a new file, named File_3.txt
At the very end of the File_3.txt file, add a new line ========= ( at least, 3 equal signs ! )
Then, under that line, append all File_1.txt contents ( with paragrahs which must be recopied )
Save the new contents of File_3.txt
Move back to the very beginning of File_3.txt file ( Ctrl + Home )
Open the Replace dialog ( Ctrl + H )
- SEARCH (?s-i)START\h*(\d+).+?END\R(?=.+(START\h*\1.+?END\R))|^===.+
- REPLACE \2
- Select the Regular expression search mode
- Click, once, on the Replace All button ( or several times on the Replace button )

Notes :

The boundaries START # and END must be written in uppercase
Each match, in File_3.txt, looks for an entire paragrah START #n ..... END ( initially, in File_2.txt ) and replaces it with the corresponding contents of the same paragraph START #n ..... END ( initially, in File_1.txt ), located after the line =========
The last match grabs and deletes all the contents betwwen the line =========, included and the very end of file ( the temporary File_1.txt contents )

Unlike I said, in my previous post :

The initial contents of each paragraph START ..... END of File_2.txt do not matter. They could even be empty !
The initial contents of each paragraph START ..... END of File_2.txt may have different number of lines than the same paragraph in File_1.txt

IMPORTANT :

I test my regex S/R against a 10 Mb file, containing 52,000 lines, about :

Beginning with :

START 1
             
             
END
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
START 2







             
END
Text OUTSIDE
START 3
             
             
END
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
START 4
             
             
             
END

Ending with :

START 1
Para 1 line 1
Para 1 line 2
Para 1 line 3
Para 1 line 4
END
START 2
Para 2 Line 1
END
START 3
Para 3 Line 1
Para 3 Line 2
Para 3 Line 3
Para 3 Line 4
Para 3 Line 5
Para 3 Line 6
END
START 4
Para 4 Line 1
Para 4 Line 2
Para 4 Line 3
END

And containing 52,000 lines about of repetitive License.txt contents, in between !

=> The replacement was succesful, after some seconds, changing the File_3.txt contents into the expected text :

START 1
Para 1 line 1
Para 1 line 2
Para 1 line 3
Para 1 line 4
END
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
START 2
Para 2 Line 1
END
Text OUTSIDE
START 3
Para 3 Line 1
Para 3 Line 2
Para 3 Line 3
Para 3 Line 4
Para 3 Line 5
Para 3 Line 6
END
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
Text OUTSIDE
START 4
Para 4 Line 1
Para 4 Line 2
Para 4 Line 3
END

Best Regards,

guy038

Ohm Dios

@guy038 Hi sir Thanks , As usual simplified solution for complex issue. Found one Issue when replace, the number sequence looks like this(my file has ex:340 paragraph) 199,299,336,49,59,69,79,89,99,109,119,…199,209 etc Instead of 1,2,3. Please look into that. Thanks.

Ohm Dios

@Terry-R Sir, Thanks. Worked Nicely Only thing its little lengthy process.
Only one small Bug Found that after completion END tag creates another 4 empty Lines and one More END tag adds

END



END

Other than this All is fine. Thanks once again.

Ohm Dios

@Terry-R P.S: In step no 5 both START ? tag

Robin Cruise

I have another question, what if I have 20 txt files in one folder, and I want to make the replace with another 20 txt files in another folder, and each of files from folder 1 also begin with Start 1 and ends with END and the same in folder 2?

And consider that the files from both folders has the same names:

File-1.txt -> File-1.txt
File-2.txt -> File-2.txt
File-3.txt -> File-3.txt
File-4.txt -> File-4.txt
…
File-20.txt -> File-20.txt

guy038

@ohm-dios,

You said :

Found one Issue when replace, the number sequence looks like this(my file has ex:340 paragraph) 199,299,336,49,59,69,79,89,99,109,119,…199,209 etc Instead of 1,2,3.

I did a quick test, replacing the values 1, 2, 3 and 4 with 199, 299, 336 and 49, without any problem !?

So, as usual, could you provide some text to test against and some information on the issue. How can you expect some help without giving us any data and vision of your workflow ?!

BR

guy038

Ohm Dios

@guy038 Thanks, Again sorry for my bad communication. My text file has 300 paragraph Numbered from 1 to 300 Ascending order. When Replacing this order changes instead of 1,2,3 it paste 199,299,336,49,59…99,109,119 etc.209,219,229 this is order.

************File2***********
START 1
 
END
Between para line
START 2
 
END
Between para line
START 3
 
END
Between para line
START 4
 
END
Between para line
START 5
 
END
Between para line
START 6
 
END
Between para line
START 10
 
END
Between para line
START 11
 
END
Between para line
START 12
 
END
Between para line
START 13
 
END
Between para line
START 14
 
END
=================
************File 1**********
START 1
some line
END
File 1 para between
START 2
some line
END
File 1 para between
START 3
some line
END
File 1 para between
START 4
some line
END
File 1 para between
START 5
some line
END
File 1 para between
START 6
some line
END
File 1 para between
START 10
some line
END
File 1 para between
START 11
some line
END
File 1 para between
START 12
some line
END
File 1 para between
START 13
some line
END
File 1 para between
START 14
some line
END

ouput

************File2***********
START 13
some line
END
Between para line
START 2
some line
END
Between para line
START 3
some line
END
Between para line
START 4
some line
END
Between para line
START 5
some line
END
Between para line
START 6
some line
END
Between para line
START 10
some line
END
Between para line
START 11
some line
END
Between para line
START 12
some line
END
Between para line
START 13
some line
END
Between para line
START 13
some line
END

Hope you will get my point. The sequence or ordering changes instead of 1,2,3. It shows first 13.Thanks.

guy038

Hello, @ohm-dios, @terry-r and All,

Ah… OK ! I understood the problem :

First, I suppose that the last line of your file did not end with two chars CRLF. So the regex just considered the START 13 ..... END paragrah as the last valid one !
Secondly, I forgot to limit the same number to find, \1, with a line-break needed right after. Indeed, when searching in the second part ( File_1 part ) for START 1, we must tell the regex to avoid matches as START 11 or START 199 and, generally, START 1 followed with any range of digits !

So, the following regex S/R should work correctly, even if the last line of current file does not end with CRLF :

SEARCH (?s-i)START\h*(\d+).+?END\R(?=.+(START\h*\1\R.+?END\R?))|^===.+

REPLACE \2

You’ll note the new syntax \1\R to get the exact number, in the part under =========== and the \R? syntax, near the end of the regex, in order to match, whatever the last chars ending current file !

Best Regards

guy038

Ohm Dios

@guy038 I Pray God to Give Unlimited Love To you. Its 100% Fine now and You Really Saved A lot of Time and Effort. Thanks a Lot.

Ohm Dios

@guy038 P.S.: Again sorry to disturb it works upto 100 after that it just replace the whole content from file_1(the one which pasted after ===========).Please look into that.

guy038

Hi, @Ohm-dios and All,

But, my regex SR is just built to do so !!

Indeed, the result file File_3.txt contains :

Firstly, the contents of File_2.txt
The line ============
Secondly, the contents of File_1.txt
Then, when running the S/R, it :
- Copies all contents of paragraphs, located after the line ========, into the corresponding paragraphs, located above the line ========
- Finally, deletes the line ========== and everything, till the very end of file
So, after saving the new contents of File_3.txt, this file becomes your new expected file File_2.txt

Or, am I missing something obvious ?

BR

guy038

Ohm Dios

@guy038 .Functioning is absolutely Right. Only 100 paragraph copied and corresponding file_1 deleted. But after 100 , the file_2 content totally replaced by file_1. Instead of copied and deleted. May be the number issue because until 100 perfect after that only issue comes.
I understood the function . lines ====== below will be copied to respective above after it gets deleted till the iteration of Paragraph Numbering.
1-100 NO ISSUE. Issue starts from 101 then all the content of file_1 directly replaced till end of file_2.Hope i explained a little you may catch my point.

Terry R

@Ohm-Dios said in Copy From one text file and Paste it on another Text File using Regex:

Only one small Bug Found that after completion END tag creates another 4 empty Lines and one More END tag adds

If you are finding there are unpaired END tags then I would assume they were there from the start. As a suggestion you can count the number of START and END tags in each file to confirm each file has the same number. To do so, use the Find function. Then type in (?-i)^START\s*\d+$ and click on the Count button. perform the same with (?-i)^END$. After getting that number you could then also perform another count as a secondary verification to count each set of START/END tags by using (?s-i)^START\s*\d+\R.+?^END$. If any of those numbers differed from the others you have an issue with your data.

There is one other count I’d like you to do since I have thought of one possibility where the empty START/END line would appear after the replacement START/END line at step 4. Use (?-si)^START.+?\R[!"#$] on file 1 and confirm the number is 0. If it is NOT 0 then I may need to amend slightly my regexes

As for my solution being a lengthy process, it is, intentionally. @guy038 solution is a much neater solution, however as he pointed out there can be issues using it on larger amounts of data. That’s why I refrain from offering it.

You also posted a question about step 5 with 2 START tags. I don’t know if you completely understand each step, although I did provide a description for each step. In step 5 we have 2 START/END lines together. The first should be the “empty” START/END line, the second the replacement START/END line. As the first has the original “line number” attached at the end we need to keep that. Step 5 regex identifies the relevant strings of characters in both lines, keeps the replacement START/END string, but attaches the number from the first line.

Terry