[New Plugin] MultiReplace
-
This post is deleted! -
@rdipardo said in [New Plugin] MultiReplace:
because Scintilla maps the ANSI code page identifiers to the same values as the Win32 API.
Does it mean that UTF8 would directly match with ANSI in scintilla? I’m facing the Problem that normal characters are matching in ANSI but special Letters like Ä or Ö don’t. Anybody an idea how to convert a widestr into UTF8 for SCI_SEARCHINTARGET to find these Characters in ANSI? Unsurprisingly the letter Ä matches with Ä in ANSI if i convart Ä into ANSI. … i think i did it but pretty challenging topic.
-
Off Topic:
@Alan-Kilborn said in [New Plugin] MultiReplace:you’re tough. Even getting banned over it doesn’t dissuade you. :-)
Big changes make always involve taking big risks. And I understand that traditions sometimes are difficult to overcome. It is perfectly normal, at least into human logic. But I also know that traditions will be overcame when people are more aware and ready to make the jump . And this is also part of life and evolution. After all evolution is the meaning of life, and without evolution life cold be less meaningful.
This is a general rule that also applies to the case. -
@Thomas-Knoefel said in [New Plugin] MultiReplace:
@rdipardo said in [New Plugin] MultiReplace:
because Scintilla maps the ANSI code page identifiers to the same values as the Win32 API.
Does it mean that UTF8 would directly match with ANSI in scintilla?
Based on how
SCI_GETCODEPAGEworks in practice, the alternative encoding to Unicode should be thought of as the “system default” rather than “ANSI”.For most of N++'s history, the “ANSI” code page was indeed single-byte (or, in the case of the legacy CJK encodings, double-byte). But the addition of a UTF-8 OEM code page in Windows version 1903 makes “ANSI” a less useful identifier, even a potentially deceptive one. The system default is no longer directly opposed to Unicode as it once was.
So, yes, there may be times when “UTF8 would directly match with ANSI,” but only if
65001is the value of theACPkey in the system’s registry. Check on this first:reg query HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nls\CodePage /s /f "CP"Anybody an idea how to convert a widestr into UTF8 for SCI_SEARCHINTARGET to find these Characters in ANSI?
When you see
const char *in the prototype of a Scintilla API (as you will for SCI_SEARCHINTARGET), it means the expected input is a byte string (i.e. “ANSI”). The conversion you want is probably fromwchar_t*tochar*. A debugger can show you what the encoded text looks like after conversion. -
Thanks, I was still a little bit too much focused on UTF8 with the preperation of ANSI. But this part is working now all directional.
@rdipardo said in [New Plugin] MultiReplace:
Except for the Double-byte Character Sets, which are (still!) the typical OEM encoding on PCs in East Asian countries. Scintilla has a dedicated API for those.
I’m trying to test DBCS on my non-Asian Windows system. Is this even possible somehow? When I test all encodings in Notepad++, SCI_GETCODEPAGE returns 0 for ANSI, and all the others give me 65001. Is there no chance of obtaining one of these encodings?
codePage == 932 || codePage == 936 || codePage == 949 || codePage == 950 || codePage == 136
I tried the BIG5 and Shift_JIS encodings, both of which are DBCS, but I obtained the same result. Even saving and reopening makes no difference. I have the feeling that i’m looking in the wrong place. -
@Thomas-Knoefel said in [New Plugin] MultiReplace:
I’m trying to test DBCS on my non-Asian Windows system. Is this even possible somehow?
Yes, go to the “Language & region” system settings, and by clicking the “Administrative language settings” a “Region” dialog is shown. This “Region” dialog has “Administrative” tab where there is a button “Change system locale” for non-Unicode programs.
( This is for Windows 11, it was much faster to find in Windows 7 :) ) -
And regarding your other question about conversion between a custom multi-byte encoding (either ANSI or DBCS) and UTF-8, this actually is achieved by double conversion:
- First, call MultiByteToWideChar to convert the input multi-byte string (e.g. ANSI/DBCS) to WCHAR string
- Second, call WideCharToMultiByte to convert the WCHAR string from the step 1 into a resulting multi-byte string (e.g. UTF-8).
To convert from UTF-8 to ANSI/DBCS, just specify CP_UTF8 in the step 1 and then the desired ANSI/DBCS codepage in the step 2.
-
I opened a few issues and added some pull requests to your repo.
If you are willing to accept pull requests, I have a few more to add once those are merged.
Cheers.
-
@Michael-Vincent Thanks, I’ve seen it, and I’m going to commit them. However, the latest updates for codepage handling have not been committed yet. I still need to set up a VMware for Chinese Language settings in order to test DBCS. Once that is finished, I’ll upload the final updates.
-
@Thomas-Knoefel These are the facts i fgured out. In Notepad++, when you ask about SCI_GETCODEPAGE, it’s always 0 for ANSI and 65001 for UTF8 you won’t encounter any other codepage. Asian codepages, like DBCS, only matter when you’re reading or writing files. So, these codepages won’t mess things up unless you’re working with files saved in these codepages. As for the Save and Load File feature of the plugin, which is designed for an internal store, it will always save in UTF8 format when handling CSV files.
I think this fact will simplify the handling of codepages. -
@Michael-Vincent said in [New Plugin] MultiReplace:
I have a few more to add once those are merged.
Thank you for your input! All requests are welcome. I can just learn from it.
-
I have finished RC-2 version with fixed ANSI support and 32 Bit code compatibility. You can find it on Github.
-
Thank you! I like it!
What probably may add more abilities to the plugin is: 1) to have a button that swaps the text between the Find What and Replace With fields; 2) to have checkboxes in the list to specify which Find-Replace pairs to activate and which to deactivate. -
@Vitalii-Dovgan I will probably add both options before final release. Thanks for your input!
-
@Vitalii-Dovgan said in [New Plugin] MultiReplace:
What probably may add more abilities to the plugin is: 1) to have a button that swaps the text between the Find What and Replace With fields; 2) to have checkboxes in the list to specify which Find-Replace pairs to activate and which to deactivate.
RC-3 has been finished!
This update includes the following new features:
-
Set individual or multiple list entries active or inactive by clicking the select button.
-
The Space key enables you to select or unselect multiple highlighted entries at once. You can also select or unselect all by clicking at the Header.
-
The selection status will be saved in CSV
-
Swap Button for switching Find and Replace text.
The Readme and Screenshot has been updated. Feel free for testing it! You can find it on Github.
-
-
@Thomas-Knoefel
Thank you!
For some reason I had an impression that the Find-Replace list, as well as the histories of the “Find what” and “Replace with” are automatically saved when Notepad++ exits… Could this be added? Probably the plugin may store this information under the PLUGINSCONFIGDIR folder as e.g. “NppMultiReplace.csv” and “NppMultiReplace.ini”
Well, I realize this also implies some settings where one could enable/disable saving of the Find-Replace list and the “Find what” and “Replace with” histories :) -
As a side note, I noticed that the LocationNavigate plugin crashes on huge number of replacements, either when a lot of replacements have been done or when the replacement are undoed. (For example, I reproduced it while replacing “CMD” with “CMD” inside of “NppExecEngine.cpp” - 1149 occurrences).
It seems to be a problem of the LocationNavigate plugin itself, but it was worth mentioning anyway.
As maybe an idea for the future version of the MultiReplace plugin, the replacements performance could be dramatically increased if the whole text was read from Scintilla into a memory buffer first, then all the replacements were done with the text in the memory buffer, and finally the resulting text was put into Scintilla. That would probably fix the problem with the LocationNavigate plugin as well. -
@Vitalii-Dovgan said in [New Plugin] MultiReplace:
For some reason I had an impression that the Find-Replace list, as well as the histories of the “Find what” and “Replace with” are automatically saved when Notepad++ exits… Could this be added?
I had this already in mind when I started implementation but forgot about it. Yes, I will implement this.
-
@Vitalii-Dovgan said in [New Plugin] MultiReplace:
As maybe an idea for the future version of the MultiReplace plugin, the replacements performance could be dramatically increased
I conducted performance tests yesterday and observed a noticeable difference in performance. There is still room for improvement, but I can confirm that there were no crashes. Specifically, the performance of CopyToClipboard is lacking. However, I will prioritize addressing this in the next release.
I’m considering another feature that could be quite helpful and compensate for the absence of Find capabilities. Next to the Mark button, it might be possible to add up and down keys (similar to those found in NPP Find). After marking, it would be useful to navigate to the marked positions, especially in large files. From a technical standpoint, I’m working on a concept, but I’m not yet convinced about the final result. It would be easy to store all marked positions and sort them. However, if any changes are made to the file, it cannot be guaranteed that these positions are still correct or that the marked text still exists. This presents a limitation. After marking all strings, the plugin should detect any changes. In such cases, the up and down navigation should be disabled. Only by marking all strings again would these buttons be enabled. I haven’t researched Scintilla yet, particularly how to detect changes after a specific moment, and perhaps this would need to be monitored through WM_TIMER. However, I’m still unsure if this limitation is acceptable. There might be other ways to solve it that I haven’t explored yet
-
@Vitalii-Dovgan said in [New Plugin] MultiReplace:
For some reason I had an impression that the Find-Replace list, as well as the histories of the “Find what” and “Replace with” are automatically saved when Notepad++ exits…
The INI support has been integrated. All settings of List, History, and Options are stored in the INI and will be reopened when loading the Plugin.
Due to the addition of some extra features that I am still working on, I will release RC4 a bit later.
