Need help with custom sort operations
-
@Terry-R said in Need help with custom sort operations:
That just means that the blocks were made into single lines.
Yes you are right, this example you did mention works now (before not / come copy paste issue maybe) but I don’t have any marker to check for in my lines.
In my example I have 3 blocks with 5 lines. Yes, in this case my blocks are static using same line counts. Otherwise you can also just use 2 lines only for every block etc. Just important are the lines which should get sorted and all lines below should moved.
Example: Just 2 lines for a block.
CCCCCCCCCCCCCCCCCCC 3 BBBBBBBBBBBBBBBBBBB 2 AAAAAAAAAAAAAAAAAAA 1 to AAAAAAAAAAAAAAAAAAA 1 BBBBBBBBBBBBBBBBBBB 2 CCCCCCCCCCCCCCCCCCC 3Sort every second line (1, 3, 5) and move every second line after (2, 4, 6).
Example2: Sort every 1&2 lines & move 3 line of block.
CCCCCCCCCCCCCCCCCCC AAAAAAAAAAAAAAAAAAA 3 BBBBBBBBBBBBBBBBBBB AAAAAAAAAAAAAAAAAAA 2 CCCCCCCCCCCCCCCCCCC BBBBBBBBBBBBBBBBBBB 1 to AAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBB 2 AAAAAAAAAAAAAAAAAAA CCCCCCCCCCCCCCCCCCC 3 BBBBBBBBBBBBBBBBBBB CCCCCCCCCCCCCCCCCCC 1Sort (1,2 | 4,5 | 7,8) & move line 3, 6 & 9. Its more specific in this case. But the good and simple thing is that the block structure for all blocks is every time the same what means they have same line counts to sort & move = X & Y. Just need to have some function / dialog where I can enter those paramters…
Enter which every line to sort: 2
Enter how many lines to sort: 1
This means 1 line left to move for each blockor for example 2
Enter which every line to sort: 3
Enter how many lines to sort: 2
This means 1 line left to move for each block…and the lines between getting just moved to the same block. Something like that etc you know.
-
@Dean-Corso said in Need help with custom sort operations:
Yes, in this case my blocks are static using same line counts
Since I’m having a bit of difficulty in reading your posts I gather that english may not be your first language? It sometimes helps to know that since some of the terminology can be difficult to understand if not english speaking.
So you seem to suggest you have different lengths in your blocks, from block heading plus 1 other line through to block heading plus 5 other lines where the 5th line is blank.
Further since you have this variability you were hoping (I gather) to have a custom method to just input the number of lines in each block and have it all sorted for you.
I doubt there is a plugin available that does that (although I haven’t used every plugin so cannot confirm) and certainly the sorting system in Notepad++ isn’t that sophisticated. That’s why the other post uses a regex to alter the blocks so the sorting function can do it’s work, then reverses that block alteration to return the blocks to the original view.
So if you wanted to use the method proposed in the other post (make each block a long line) we can provide you with an adjusted method.
Terry
EDIT: just noticed example 2 appears to show 2 block heading lines. You show the replacement as the 2 same block heading lines in reverse order, but still maintaining the block with line 3. That puts a further complication on matters. Currently I cannot see a method of doing that.
-
Yes, English isn’t my main language and I need to translate sometimes a little or just try to speak more in freestyle you know.
Ok, sounds bad that npp can’t do that at the moment or you don’t know any plugin what could handle it that way I’m looking for. So the principle of the sort operation I want is pretty simple (sort function npp has already I want to use / line operations) but only need that specific line-select / line-move thing etc. Maybe it would be a good idea to add another function in npp itself for that in any next release. Otherwise I also don’t have a clue how to do my sort operations I want in npp.
MfG
-
@Dean-Corso said in Need help with custom sort operations:
So the principle of the sort operation I want is pretty simple
Well, sorry to say but what you need isn’t simple. If you had every line sorting alphabetically or numerically, ascending or descending then that is what I would call simple. And NPP covers those bases very well.
Beyond that there are so many different ideas (your’s being just 1 of thousands) I doubt the developer will consider expanding the NPP sorting functions to cover your’s or anyone else’s.
At present since you may have multiple block heading lines (in a single block) which need sorting first, before the new first block heading line becomes the line to sort the order of the blocks (your example 2) I can only think it will require some code (such as in PythonScript) to do what you need.
Unfortunately we aren’t a code creating forum as such, just a general forum supporting NPP users. Someone here might possibly consider it a worthwhile exercise to create such a program for you, but don’t expect it.
I will continue to ponder your request (I’m not a code creator) just in case there might be another way using just a (series of) regex.
Good luck
Terry -
This is a great opportunity to try out my new script for sorting multi-line blocks!
Just use the regex
(?s-i)(^[A-Z]+$).*?(?=^[A-Z]+$|\Z)and the optionsGroup 1 transformation: [ ]Integer(DEFAULT) [ ]Decimal [ x ]String [ ]Ignorecase-cultural Sort order: [ ]Ascending(DEFAULT) [ ]Descending Other: [ ]Sort-only-if-all-lines-have-group-1-match(DEFAULT) [ ]Remove-non-matching-lines [ ]Sort-non-matching-lines-to-bottom [x ]Multi-line-blocksEXAMPLE:
DDDDDDDDDDDDD onro roeri AAAAAAAAAAAAAAAAAAA FFFFFFFFFFFFFFFFFFF foo EEEEEEEEEEEEEEEEEEEEE oroieoj roernern reroo BBBBBBBBBBBBBBBBBBB ccc furr CCCCCCCCCCCCCCCCCWILL BE SORTED TO
AAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBB ccc furr CCCCCCCCCCCCCCCCC DDDDDDDDDDDDD onro roeri EEEEEEEEEEEEEEEEEEEEE oroieoj roernern reroo FFFFFFFFFFFFFFFFFFF foo -
I did just see your “other” post where you showed the new script and wondered if it would be any good for this.
I have a problem with your example as you show the first block as just having the DDDDD… line but when it’s sorted it suddenly gains the CCCCCC… line which was at the bottom in the before example. Was that a typo?
Or maybe I am just not reading the before and after examples right.
Terry
PS I was working on a poor mans method which was a bunch of regexes and using some of the more advanced caret moves to expand selections prior to sorting. The macros created would “run until end of file”.
-
@Terry-R said in Need help with custom sort operations:
Or maybe I am just not reading the before and after examples right.
I was in the headspace of working the solution based on 2 block header lines per block. When I saw your example it seemed like you were doing the same. Re-reading it, it suggests your example doesn’t have a defined block line length. I suppose that is good in that it can cater for a “loose” structure. But how does it know where each block starts and ends? (I’m not a code reader).
Terry
-
@Terry-R said in Need help with custom sort operations:
Or maybe I am just not reading the before and after examples right.
Yeah, you’re just reading them wrong. My block-sorter just removed a trailing newline after the
DDDDDDDDDDDDblock. -
@Terry-R said in Need help with custom sort operations:
But how does it know where each block starts and ends? (I’m not a code reader).
That is a good question, which the documentation in my script should definitely address.
The answer is that your regex must match the entire block and have a single capture group within the portion to be matched.
Thus,
(?s-i)(^[A-Z]+$).*?(?=^[A-Z]+$|\Z)is the appropriate regex to use, because the first capture group(^[A-Z]+$)contains the header line, and the regex as a whole matches everything up to the next header. -
@Mark-Olson said in Need help with custom sort operations:
My block-sorter just removed a trailing newline after the DDDDDDDDDDDD block.
If you look at the first post the example there showed a “trailing” blank/empty line. They wanted this kept.
From all @Dean-Corso posts so far I think they want the ability to dictate 2 parameters before running the process.
- How many lines in each block. They state they are well defined, so ALL the same number of lines.
- How many of the lines (from start of block down) will be sorted first within the block.
Lastly another sort is performed on the file using ONLY the first header line of each block (keeping each block intact).
Currently I don’t think your script will work that correctly, certainly as you seem to be removing “blank” lines that won’t work for them.
Terry
-
@Terry-R said in Need help with custom sort operations:
If you look at the first post the example there showed a “trailing” blank/empty line. They wanted this kept.
Yep, that’s a limitation of my script. I’m not going to change it, because every way I’ve tried to get around that limitation makes things worse.
Fortunately, it is quite easy to make a regex-replace that creates a trailing blank/empty line after each block. Just replace
(?<!\A)(^[A-Z]+$)with\r\n{0} -
@Dean-Corso said in Need help with custom sort operations:
Just need to have some function / dialog where I can enter those paramters…
Enter which every line to sort: 2
Enter how many lines to sort: 1Done. Just use the following script in PythonScript
# -*- coding: utf-8 -*- ######################################### # # sort_line_blocks_and_headers # ######################################### # references: # https://community.notepad-plus-plus.org/topic/24742/need-help-with-custom-sort-operations # HOW IT WORKS: # 1. Divide the document into blocks of N lines, of which the top M lines are the header. # 2. Sort the header of each block # 3. Sort the blocks by the sorted headers. # EXAMPLE INPUT: # CCCCCCCCCCCCCCCCCCC # AAAAAAAAAAAAAAAAAAA # 3 # BBBBBBBBBBBBBBBBBBB # AAAAAAAAAAAAAAAAAAA # 2 # CCCCCCCCCCCCCCCCCCC # BBBBBBBBBBBBBBBBBBB # 1 # RESPOND TO THE 4 PROMPTS AS FOLLOWS: 3, yes, 2, yes # RESULT: # AAAAAAAAAAAAAAAAAAA # BBBBBBBBBBBBBBBBBBB # 2 # AAAAAAAAAAAAAAAAAAA # CCCCCCCCCCCCCCCCCCC # 3 # BBBBBBBBBBBBBBBBBBB # CCCCCCCCCCCCCCCCCCC # 1 from __future__ import print_function from Npp import * def main(): eol = [ '\r\n', '\r', '\n' ][ editor.getEOLMode() ] while True: lines_per_block_str = notepad.prompt('number of lines per block', 'sort blocks', '3') if lines_per_block_str is None: return try: lines_per_block = int(lines_per_block_str) if lines_per_block < 1: raise ValueError except: notepad.messageBox('lines per block must be integer >= 1') continue sort_blocks_ascending_str = notepad.prompt('sort blocks least to greatest (yes/no)', 'sort blocks', 'yes') if sort_blocks_ascending_str is None: return reverse_blocks = sort_blocks_ascending_str != 'yes' lines_in_header_str = notepad.prompt('number of lines in header', 'sort blocks', '1') if lines_in_header_str is None: return sort_header_ascending_str = notepad.prompt('sort header least to greatest (yes/no)', 'sort blocks', 'yes') if sort_header_ascending_str is None: return reverse_header = sort_header_ascending_str != 'yes' try: lines_in_header = int(lines_in_header_str) if lines_in_header < 1 or lines_in_header > lines_per_block: raise ValueError except: notepad.messageBox('lines in header must be integer <= lines in block and >= 1') continue break lines_not_in_header = lines_per_block - lines_in_header find_regex = '(?-s)((?:.*\R){%s})' % lines_in_header if lines_not_in_header: find_regex += '((?:.*(?:\R|\Z)){%s})' % lines_not_in_header # print(find_regex) header_block_list = [] doc_len = editor.getLength() def on_match(m): sorted_header = eol.join(sorted(m.group(1).splitlines(), reverse=reverse_header)) edited_block = sorted_header + eol + m.group(2) if m.span()[1] < doc_len: edited_block = edited_block[:-len(eol)] header_block_list.append((sorted_header, edited_block)) editor.research(find_regex, on_match) header_block_list_sorted = [x[1] for x in sorted(header_block_list, reverse=reverse_blocks)] # print(header_block_list) editor.setText(eol.join(header_block_list_sorted)) if __name__ == '__main__': main() -
M Mark Olson referenced this topic on
-
@Mark-Olson
My initial script had some bugs. Use this instead# -*- coding: utf-8 -*- ######################################### # # sort_line_blocks_and_headers # ######################################### # references: # https://community.notepad-plus-plus.org/topic/24742/need-help-with-custom-sort-operations # HOW IT WORKS: # 1. Divide the document into blocks of N lines, of which the top M lines are the header. # 2. Sort the header of each block # 3. Sort the blocks by the sorted headers. # EXAMPLE INPUT: # CCCCCCCCCCCCCCCCCCC # AAAAAAAAAAAAAAAAAAA # 3 # BBBBBBBBBBBBBBBBBBB # AAAAAAAAAAAAAAAAAAA # 2 # CCCCCCCCCCCCCCCCCCC # BBBBBBBBBBBBBBBBBBB # 1 # RESPOND TO THE 4 PROMPTS AS FOLLOWS: 3, yes, 2, yes # RESULT: # AAAAAAAAAAAAAAAAAAA # BBBBBBBBBBBBBBBBBBB # 2 # AAAAAAAAAAAAAAAAAAA # CCCCCCCCCCCCCCCCCCC # 3 # BBBBBBBBBBBBBBBBBBB # CCCCCCCCCCCCCCCCCCC # 1 from __future__ import print_function from Npp import * def main(): eol = [ '\r\n', '\r', '\n' ][ editor.getEOLMode() ] while True: lines_per_block_str = notepad.prompt('number of lines per block', 'sort blocks', '3') if lines_per_block_str is None: return try: lines_per_block = int(lines_per_block_str) if lines_per_block < 1: raise ValueError except: notepad.messageBox('lines per block must be integer >= 1') continue sort_blocks_ascending_str = notepad.prompt('sort blocks least to greatest (yes/no)', 'sort blocks', 'yes') if sort_blocks_ascending_str is None: return reverse_blocks = sort_blocks_ascending_str != 'yes' lines_in_header_str = notepad.prompt('number of lines in header', 'sort blocks', '1') if lines_in_header_str is None: return try: lines_in_header = int(lines_in_header_str) if lines_in_header < 1 or lines_in_header > lines_per_block: raise ValueError except: notepad.messageBox('lines in header must be integer <= lines in block and >= 1') continue if lines_in_header > 1: sort_header_ascending_str = notepad.prompt('sort header least to greatest (yes/no)', 'sort blocks', 'yes') if sort_header_ascending_str is None: return reverse_header = sort_header_ascending_str != 'yes' else: reverse_header = False break lines_not_in_header = lines_per_block - lines_in_header if lines_not_in_header: find_regex = '(?-s)((?:.*\R){%s})((?:.*(?:\R|\Z)){%s})' % (lines_in_header, lines_not_in_header) else: find_regex = '(?-s)((?:.*(?:\R|\Z)){%s})' % lines_in_header # print(find_regex) header_block_list = [] doc_len = editor.getLength() def on_match(m): is_last_match = m.span()[1] == doc_len group1 = m.group(1) if not group1: return sorted_header = eol.join(sorted(group1.splitlines(), reverse=reverse_header)) if lines_not_in_header: edited_block = sorted_header + eol + m.group(2) else: edited_block = sorted_header if not is_last_match and edited_block.endswith(eol): edited_block = edited_block[:-len(eol)] header_block_list.append((sorted_header, edited_block)) editor.research(find_regex, on_match) header_block_list_sorted = [x[1] for x in sorted(header_block_list, reverse=reverse_blocks)] # print(header_block_list) editor.setText(eol.join(header_block_list_sorted)) if __name__ == '__main__': main() -
-
Thank you guys for trying to help me (and others maybe too) to find a solution for my sorting problems. Sounds great that you was able to create a script for that task. Only problem at the moment is I don’t know yet how to use it so maybe you could give me a little crash curse what plugin to install and what parameters I have to execute (python + your script + my npp tab or file) etc. So I have python installed already on computer. My question is also whether I can execute your py script in npp for the open / focused tab itself (also when I just have written text in real time without saved file). As I said, not sure what plugin to install for py (by the way, the PyNPP plugin is not listed in plugin manager) if I have to. Would be nice if you could tell me and show one or two examples how to execute your script with an file which is open in notepad++ or if possible also using a direct tab (none file) in pipe mode etc if this is supported. Thank you.
-
@Dean-Corso said in Need help with custom sort operations:
little crash curse what plugin to install and what parameters I have to execute
-
Thank you for that link & info. Ok, I think I got it working now to execute your script @Mark-Olson and on my first tests it seems to work as I wanted! Coolio! I will do some more tests but it looks already pretty well.
Is this sort operation which works now for all complete lines also doable to for that rectangle selection (maybe for later)? Lets say I have few vertical text blocks and I want to select any of them via rectangle selection and want to sort all lines from that selection. Could that be possible too?
Just as info: I found out that if I want to sort specific rectangle selected lines (middle - end) that it’s only working when I trim all the selected lines starting at same vertical position and I also need to change all blank chars like TABs to Space before I do a sort to make it work. Just don’t understand why but I have to.
Example: 2 blocks / tabs between / sort ascending ic.
66666 qqqqqqq 55555555 zzzzzzz 777 aaaaaaa 88888888888 xxxxxxxI just select the second block via rectangle select then I do the line sort with ingore case and I got this out.
55555555 zzzzzzz 88888888888 xxxxxxx 777 aaaaaaa 66666 qqqqqqq=? So when I do same but before I call the blank option “Tab to Space” and select the 2. block and call then the sort function then I get this out…
777 aaaaaaa 66666 qqqqqqq 88888888888 xxxxxxx 55555555 zzzzzzzwhich is correctly now. Just don’t understand why I have to change the tabs to space before the selection so normally it should play no role at this point what comes before the selection you know. Is this a bug or do I understand it wrong? You know what I mean?
Thank you very much so far guys.
-
@Dean-Corso If it helps you, my plugin Columns++ (still in alpha stage, though apparently stable) can sort column selections containing tabs.
The reason the native sorts in Notepad++ don’t work is because they determine the first and last character positions of the rectangular selection in the first line of the selection and then apply those character positions to all lines; they don’t use the line-by-line contents of the rectangular selection.
-
Thank you for that info. I did test your plugin and it seems to work to do the sort operation without conversion. I also see your plugin has also some more interesting functions I need to check out more.
I think one of the problem in npp & plugin is that in both are missing some clear methods to use specific operations just for all lines OR selection with or without to handle lines you know what I mean?
Example: Sort function.
1.) I want to handle all lines
2.) I want to handle just my selection (normal case)
3.) I want to handle rectangle selection + lines
4.) I want to handle rectangle selection itself onlyPoint 1 & 2 seems to work good so far in npp to do that but in special cases 3 & 4 it could be problematic.
When I sort any lines (selected or not) then empty lines getting removed. Why? How to prevent that? On first view it looks good to remove blank lines but in case when I want to keep the lines original then I need to add empty lines manually after sorting.
What is when I just want to sort the content of my rectangle selection without to move all the lines? I see its also not doable so far in npp.
What is when I want to sort my rectangle selected part / lines and ignore all blank chars till the first char begins? Not working as I can see and I need to bring all the selected lines starting at the same position point like this…(I did rectangle select the right part)
66666 Qqqqqqq 55555555 Zzzzzzz 777 Aaaaaaa 88888888888 Xxxxxxx…and before I can sort I need to change them to this…
66666 Qqqqqqq 55555555 Zzzzzzz 777 Aaaaaaa 88888888888 Xxxxxxx…and now I can do a sort which works and moves all lines. But what if I want just to sort that selection only and keep the left part / lines unchanged? Like this…
66666 Aaaaaaa 55555555 Qqqqqqq 777 Xxxxxxx 88888888888 Zzzzzzz…only selection was sorted and the rest is same. So is it too specific what I want?
-
@Dean-Corso said in Need help with custom sort operations:
Example: Sort function.
1.) I want to handle all lines
2.) I want to handle just my selection (normal case)
3.) I want to handle rectangle selection + lines
4.) I want to handle rectangle selection itself onlyPoint 1 & 2 seems to work good so far in npp to do that but in special cases 3 & 4 it could be problematic.
Case 3 should work using Columns++. It also works with the built-in Notepad++ sorts provided you have a fixed-pitch font and no tabs.
Case 4 can be handled easily this way:
Make the rectangular selection.
Copy the selection to the clipboard.
Open a new tab and paste the selection into it.
Sort the new tab.
Make a rectangular selection encompassing all the data.
Copy the selection to the clipboard.
Switch back to the original tab and paste the data into the rectangular selection.Doing this in one step, instead of copying and pasting into a temporary tab, is something I could include in Columns++. I can’t promise, but the next time I make changes I’ll see if it can be added without making things too clumsy or complicated.
When I sort any lines (selected or not) then empty lines getting removed. Why? How to prevent that? On first view it looks good to remove blank lines but in case when I want to keep the lines original then I need to add empty lines manually after sorting.
What is when I just want to sort the content of my rectangle selection without to move all the lines? I see its also not doable so far in npp.
That’s a bit more complicated. The blank lines aren’t being removed, they’re just sorting, the same as all the other lines; to the beginning if it’s an ascending sort or to the end if it’s a descending sort. If you want to skip sorting those lines, then it becomes confusing. Do they serve as breaks — meaning each section between blank lines is sorted, but lines aren’t moved across blank lines? Or do all the non-blank lines get sorted, but then positioned only where non-blank lines occurred before, leaving the blank lines at the same line number positions? Or do the blank lines “stick with” the preceding non-blank line? Or the following non-blank line? Or something else?
I think there are too many variations in what someone could want to make it practical to implement.
What is when I want to sort my rectangle selected part / lines and ignore all blank chars till the first char begins? Not working as I can see and I need to bring all the selected lines starting at the same position point like this…(I did rectangle select the right part)
66666 Qqqqqqq 55555555 Zzzzzzz 777 Aaaaaaa 88888888888 Xxxxxxx…and before I can sort I need to change them to this…
66666 Qqqqqqq 55555555 Zzzzzzz 777 Aaaaaaa 88888888888 XxxxxxxAt present, none of the sorts have an option to ignore leading blanks, but that is a logical request. For this, too, I’ll say that when I next make some changes to Columns++, I will see if something like this can work. Offhand, I think it might be handy to make a sort that applies a user-specified regular expression to each line in a rectangular selection to determine the sort key. Skipping leading blanks would be an easy special case of that.
-
Thank you for the feedback. Yes I have seen that I can copy / paste the rectangle selection using another tab or free space below etc but this is again a detour I want to prevent of course. Sounds good if you could add some more features in your plugin if possible. I already added your plugin releases into my RSS feed list.
I was trying around to handle specific tasks I got in my mind when editing different text and lines using Notepad++ and have seen that not all I wanna do is doable yet. Would be good if you could add more features into your plugin later to have more capabilities & possibilities to edit text, lines and selections etc. Just another suggestion to you @Coises, could you also add that specific sort method (block sort / move) I did requested and @Mark-Olson made that python script for that. Maybe you can adapt it and include it into your plugin sort operation with extra custom dialog to enter the user data. Thanks.
PS: Just a question about this forum style. How to reply & see the forum at the same time? Each time when I wanna reply an answer then the text field does popup as overlay and I can’t see the text of the posts anymore and I can just move this reply window a little bit down only. I would like to see all at once like in other forums too. How to do that here?
