Mark lines with blue balls and jump between them

astrosofista

Did that and could navigate up and down without issues. Tested in my installed v7.9.5, with lots of plugins, and on a bare-bones portable v8.1.9.3.

Debug info:

Notepad++ v8.1.9.3   (64-bit)
Build time : Dec  6 2021 - 19:21:37
Path : D:\Applications\npp.8.1.9.3.portable.x64\notepad++.exe
Command Line : 
Admin mode : OFF
Local Conf mode : ON
Cloud Config : OFF
OS Name : Windows 10 Pro (64-bit) 
OS Version : 2009
OS Build : 19042.1415
Current ANSI codepage : 1252
Plugins : mimeTools.dll NppConverter.dll NppExport.dll

Hope this helps

Terry R

@guy038 said in Mark lines with blue balls and jump between them:

Terry, may be, we’re speaking, each other, about different things ! I’m not concerned with styles 1 to 5 at all but only with the Mark dialog.

Sorry, I don’t do much marking with styles, hence why I got confused with your first post. You had talked about style marking then jumped to the mark function (different) but I didn’t notice that, on a re-read I do now.

So back to testing I cannot get the Ctrl + Shift + 0 to work. This was on 3 PC’s, as 2 PC’s are under work control and may have Group Policies applied which potentially adversely affect NPP I also tried another unaffected PC. So the result was always the same, the forward jump worked, but backwards never did. One work PC and the unaffected PC were both with a portable installation.

So it would seem we have a problem, I won’t go so far as to say a bug, but it would seem, given @astrosofista test results there may be an environmental situation which prevents the backwards jump from working.

Terry

Alan Kilborn

@guy038 said in Mark lines with blue balls and jump between them:

but the Ctrl + Shift + 0 shortcut does not !?

You are correct. This seems to be a long standing problem, discussed a few times BEFORE.
I just tested again and it still does not work for me.
It would be nice to have resolution to this, or more info if it works for some people and not others.

artie-finkelstein

@alan-kilborn
just to chime in (Note: I’m still on Npp v8.1.9)-
Ctrl+0 works for forward move to next mark
Ctrl+Shift+0 doesn’t work for anything

I also used Nir Sofer’s HotKeysList to verify there is no system level hot key assigned to Ctrl+Shift+0.

Catrin Brooks

You’re right, sir. I’ve heard about this before, and it seems to be a long-standing issue.
I just tried it again, and it doesn’t work.
A solution to this or additional information about why it works for some and not for others would be welcome.

Alan Kilborn

@Terry-R said in Mark lines with blue balls and jump between them:

I cannot get the Ctrl + 0 or Ctrl + Shift + 0 to work.

I could not get them to work either, with my new Windows 11 PC…until I unmapped something Windows had “conveniently” mapped for me. I did this, in Windows:

Settings > Time & Language > Language & region > Typing > Advanced keyboard settings > Input language hot keys > Advanced Key Settings > Hot keys for input languages > Action > Between input languages > Key sequence (set it to None)

And, after that, both Ctrl+0 and Ctrl+Shift+0 worked in Notepad++.

guy038

Hello, @alan-kilborn,

Pleased that your Ctrl + 0 and Ctrl + Shift + 0 shortcuts work fine, from now on, for you !

As for me, I still cannot get the previous bookmarked line with the Ctrl + shift + 0 shortcut, on my Widow 10 laptop, with N++ v8.5.4 portable installed :-((

When I open the Settings window, I can go to the Heure et langue section ( which seems identical to the first choice Time & Language )

But, at this point, I’m quite lost :

I personally see this screen, below. But, seemingly, you see a Language & region option, on the left side :

I suspect that it’s because, in the language part, below, I just have one language installed ( Français 'France ) and you probably have more than one installed in your Windows 11 installation ?

On the other hand, as I do not have any shortcut to switch between two Input languages, it should not interfere with Notepad++ at all and I should be able to use the cttl + Shift+ 0 shortcut !

Thus, Alan, could you show us, by screenshots, the first steps to do ?

May be, I’ll neeed to install the English (United States) language to get options similar to yours ! However, it seems paradoxal to install something… in order to suppress an unwanted behaviour !

Best Regards,

guy038

Coises

@guy038 Try clicking the “Clavier” icon that’s in your last screenshot. The dialog that raises should have a link labeled something that translates to “Input language hot keys.”

If that doesn’t explain it — is the key above and just to the left of P on your keyboard à — requiring Shift to produce 0? If so, it’s possible that the way Notepad++ is reading the keystrokes to produce an accelerator is seeing Ctrl[+Shift]+`a instead of Ctrl[+Shift]+0. I haven’t yet looked at the code to see if I can tell if that would be so.

guy038

Hello, @alan-kilborn, @coises and All,

Yes, @coises, you were right about it ! When I clicked on the clavier icon, I got this screen :

However, ( I cannot be sure ) it seems that, before, I did hit that icon and that I did not see the two options :

Options de la barre de langue
Touche de raccourci de langue d'entrée

I must add that, at one moment, I tried to see what happens when you click on the Ajouter une langue option ( Refer the end of my previous post ) Well, you get this new screen and after choosing the Anglais (United States) option, I finally see this screen about installing this new language, that I DID NOT confirm ! May be, this abortive action was enough to enable the two options above ?

Anyway, after clicking on the Touche de raccourci de langue d'entrée I saw this window and after clicking on the Modifier... button, this small window appeared. As I seemed concerned with the Changer la disposition du clavier, I simply chose the Non assigned option, ( instead of Ctrl + Maj option and valid all the windows.

After restarting N++, everything was OK ! The funny thing is that I tried to put back the Ctrl + Maj option, for the keyboard layout, and, surprise, everything was still OK ??? I even stop and restart my laptop and it still worked fine !

Conclusion : I can’t remember, for sure, of the set of actions really done ! I’ve just noticed that, when you hit the Ctrl + shift + 0 shortcut, after some consecutive Ctrl + 0 hits, the caret move, first, from the end of current marked word to its beginning, then move back to the beginning of previous word and so on… !

Anyway, as we say in French : Tout est bien qui finit bien !

Best regards,

guy038

Alan Kilborn

@guy038 said in Mark lines with blue balls and jump between them:

Thus, Alan, could you show us, by screenshots, the first steps to do ?

I could (and will if you really want it), but I suspect that Windows has diverged so much in what it looks like (around the world) that doing so is of dubious value. I think it has already been shown (to me) how different your (admittedly Win10) setup appears.

Conclusion : I can’t remember, for sure, of the set of actions really done !

Yes, it does seem to get confusing in a hurry! :-)

when you hit the Ctrl + shift + 0 shortcut, after some consecutive Ctrl + 0 hits, the caret move, first, from the end of current marked word to its beginning, then move back to the beginning of previous word and so on… !

And that’s how it is supposed to work, correct?