not able to see the search results windows in notepad++

Alex Chan

I had the same problem after update to latest version. This is how I got the search windows back, Hope it help.

Run find all once, like “Find all in Current Document”
Press F7, Or click it from the Search bar, There is a search result windows option.
After you click it or press F7, It might looks like noting happen to you. Move your mouse to the edge of the file, you can see an up and down arrows.
After the up and down arrows shows up, Right click the mouse and hold it, than you can pull down the file (new 1 in this case). You should see the search window.

Dale Dullnig

Hmm, running into this myself. Carefully dragging the mouse along the edges of Notepad have confirmed the lack of any 0px Find windows, and the Alt-Space Move bit had no effect either. I did first ctrl-f to Find All in All Opened Documents.

I was only able to get it back by deleting everything in between the <GUIConfig name = “DockingManager” (…)> tags and restarting N++. (The Find results showed up attached to the bottom of the N++ window)

Here’s what was in my config.

(…)
<GUIConfig name=“AppPosition” x=“454” y=“206” width=“1046” height=“675” isMaximized=“no” />
(…)
<GUIConfig name=“DockingManager” leftWidth=“200” rightWidth=“200” topHeight=“200” bottomHeight=“200”>
<PluginDlg pluginName=“Notepad++::InternalFunction” id=“0” curr=“5” prev=“1” isVisible=“no” />
<ActiveTabs cont=“0” activeTab=“-1” />
<ActiveTabs cont=“1” activeTab=“-1” />
<ActiveTabs cont=“2” activeTab=“-1” />
<ActiveTabs cont=“3” activeTab=“-1” />
</GUIConfig>

PeterJones

@Dale-Dullnig said in not able to see the search results windows in notepad++:

Here’s what was in my config.
<PluginDlg pluginName=“Notepad++::InternalFunction” id=“0” curr=“5” prev=“1” isVisible=“no” />

The isVisible="no" says that the last time you closed Notepad++ (which thus wrote that copy of config.xml), you did not have an active Search Results window at all (which means you hadn’t done a Find All in Current Document (“FACD”) or Find in Files (“FiF”) or Find in Projects (“FiP”) since you opened Notepad++, or had closed the window). The curr="5" says that it was not docked to any of the four edges the last time it was open, which means it was a floating window.

But that curr="5" intrigues me: @guy038’s experiments in January indicated that curr="4" meant it was undocked, so I was curious where curr="5" could come from, with my guess being multiple undocked panels.

More experiments showed that if I had two separate floating windows, they are given 4 and 5 as the numbers. And then, when I restarted, and closed the extra floating window, then restarted again (IIRC), when I did a FACD, the Search Results window did not show up. I will have to run a few more experiments to try to get a minimal 100%-repeatable set of steps to reproduce reliably, but if I am able to get it, I will put in a new issue, because it won’t be solved by the Feature Request #13084 which was supposed to keep those widths from ever being saved <10pixels.

But this is the first new lead we’ve had. Thank you, @Dale-Dullnig , for providing the extra information that we hadn’t previously seen.

-----

update: new issue #14478

rw-schumann

Hi, I can add a bit more info to help isolate this problem I believe.

I have a search window which is NOT docked. I work on a laptop which I use standalone, as well as with two different dual monitor setups.

When I move between setups the code which reconfigures Notepad++ for the new windows setup seems to cause an issue with the docked search results window.

This is the section from the config.xml file when my results window could not be found anywhere:

I edited the config file to remove the first <FloatingWindow cont=“4” … line and then restarted Notepad. At that point my search window was visible.

Several strange items:

There were two of the floatingWindow entries for cont=4.
The first entry had a negative number for the ‘x’ position.

PeterJones

@rw-schumann ,

If you want to go ping on issue #14478, that would be helpful. Unfortunately, now that the issue is created, there’s nothing more we in the Forum can do to speed things along.

xomx

The GitHub issue #13084 (“Solution to the “lost panel” problem”) has been fixed, the fix will be included in the upcoming N++ version (probably v8.6.9).

@PeterJones
The relevant FAQ will probably need an update.

(Note: The #14478 issue (“Lost “Search Results” window (undocked)”) is still not fixed).

PeterJones

@xomx said in not able to see the search results windows in notepad++:

The relevant FAQ will probably need an update.

Updated.

(Note: The #14478 issue (“Lost “Search Results” window (undocked)”) is still not fixed).

Don just closed that one a few hours ago, claiming it was fixed in v8.6.9 as well – I reran my steps to reproduce, and confirmed that v8.6.9 still has the undocked failure, so I’ve asked him to re-open the issue.

alex-friant

@PeterJones I can get results to not show up when the following steps are taken in Windows:

Locate a directory in File Explorer
Hold Shift + Right-Click the directory
Select ‘Copy as Path’ option
Paste clipboard contents into NotePad++ Find in Files field labeled ‘Directory’ (directory to search)
Enter a term in “Find what” field you know exists in files in that directory
Select ‘Find All’ button

No results come back.

It’s probably because NotePad++ doesn’t like quotes surrounding a directory path, treats it as a non-existent location. I did notice that the directory path entered gets highlighted after selecting the ‘Find All’ button, but no warning/error message was supplied to make it clear that the program doesn’t recognize the path with quotes surrounding it.

When I removed the quotes, it works as expected.

PeterJones

@alex-friant ,

That’s a completely different problem than the issue being discussed.

Your problem is just user error. The quotes are not part of the directory name, so you need to remove them, because Notepad++ is actually using the name of the directory, not passing a directory name to a command-line argument. (The quotes that Windows “helpfully” applies are because most people, when using that, are then pasting it into a command line, where the quotes are required to make it one argument rather than splitting it into the number of arguments based on the number of spaces.) But Notepad++ is expecting the name of the directory without quotes, so just give it that.

poornima devi pothuraju

Hi all,
Iam not able to see the search result window.
Followed these command commands which was shared by PeterJones, still not able to see .
At app position x=“199” y=“12” width=“1024” height=“690” isMaximized=“no”
And at docking manager
All width are 200
After that line immediately active tabs from cont=“0 to 3” with activeTab=“-1”

Can anyone please help me to get it resolved.
It’s very emergency.

Terry R

@poornima-devi-pothuraju
Emergency or not, members helping here are volunteers so it may take time to help you.

We have a FAQ post about this problem. Read this post and try to follow the steps. Let us know the result.

Terry

PeterJones

Locking This Thread

This issue has come up multiple times. To keep the discussion in one place, please read the v8.7 Search Results section of the missing-panel FAQ, and then continue any discussion in the v8.7 Search Results Missing topic.