Multi-cursor editing

czmaniak

Regex is something new for me that I have no experience with, I do not know where to write text with commands, where to start? My English is not so good it can also be a bit of a problem. I’ll try to look at the forum content for more information.

Thank you very much for your time and effort to explain this issue to me. I appreciate it really much

Alan Kilborn

After all the back and forth above, I’ve sort of changed my mind. I think that the way the OP wants to go about this is very reasonable, without using search-and-replace. The scenario is rather rare, but for where text is very regular before or after the original search is conducted…I can see it.

Ekopalypse

@czmaniak

If I understand this correctly, then one, non-plugin way would be,
to press and hold the CTRL button and click with the mouse on the
respective places.

Alan Kilborn

@Ekopalypse said in Multi-cursor editing:

If I understand this correctly, then one, non-plugin way would be,
to press and hold the CTRL button and click with the mouse on the
respective places.

True, but I get the feeling we are talking about hundreds of such places, potentially, which makes that problematic.

Ekopalypse

@Alan-Kilborn
I assume so too.
I do have a little PS script for selecting all same words

from Npp import editor
first_line = editor.getFirstVisibleLine()
editor.setTarget(0, editor.getTextLength())
editor.multipleSelectAddEach()
editor.rotateSelection()
editor.setFirstVisibleLine(first_line)

Ekopalypse

In case someone is trying this.
If no word is selected the first execution would select the current word
and the next execution all others.

Alan Kilborn

@Ekopalypse

Yes, this (or a variant which included a search) would get all of the carets in the correct place, but from there the OP’s desire is to be able to move all of the carets in junction to a constants offset from that point, and which point insertion/deletion would commence. At least this is what I gather from watching the OP’s video. And if I try something like that after running your script, all but one of the carets is removed as soon as I do the first cursor movement operation. I expected this.

But I also respect the OP’s desire for something like this to be possible.

astrosofista

@Alan-Kilborn said in Multi-cursor editing:

Yes, this (or a variant which included a search) would get all of the carets in the correct place, but from there the OP’s desire is to be able to move all of the carets in junction to a constants offset from that point, and which point insertion/deletion would commence. At least this is what I gather from watching the OP’s video. And if I try something like that after running your script, all but one of the carets is removed as soon as I do the first cursor movement operation. I expected this.

Hi @Alan-Kilborn, @Ekopalypse, All:

As I understand, Ekopalypse’s script in conjunction with the BetterMultiSelection plugin provide an interesting approach if not an actual solution to OP’s request.

Take a look to how I can resolve the sample that Op posted before in this thread:

giphy

If needed, I can post the commands used to move the caret in the above embedded gif.

Ekopalypse

@Alan-Kilborn, @astrosofista

I watched the youtube video and it looks like you can do this
with my script.
You do get multiple selection and those will move when using the arrow keys.
What do I miss??

astrosofista

@Ekopalypse said in Multi-cursor editing:

You do get multiple selection and those will move when using the arrow keys.
What do I miss??

@Ekopalypse

You need to check the Multi-Selection option in Preferences and install the BetterMultiSelection plugin.

Ekopalypse

@astrosofista

thx, but I can already do what your gif shows without having BetterMultiSelection installed just by using my script.

Alan Kilborn

@Ekopalypse

You do get multiple selection and those will move when using the arrow keys.

Well, I’ve never had much luck with doing that in a “real” way. A real way would be a real problem I’m working on.

BTW, I like futzing around with Notepad++ and its peculiarities, but it gets frustrating fast when you are trying to do something “real” and you run into Notepad++'s bugs. :-)

Ekopalypse

this is how it looks like on my PC

astrosofista

@Ekopalypse said in Multi-cursor editing:

thx, but I can already do what your gif shows without having BetterMultiSelection installed just by using my script.

@Ekopalypse

You are right. I disabled the plugin and your script does all the work and OP should pay close attention to it.

Anyway I still believe that the conjuntion of both the plugin and your script creates a better tool. The plugin works nice with contiguous selections, which it can create by draging, and your script extend its capabilities to make distant selections. I thank you for it.

By the way, have you plans to make the plugin able to search for partial words? At first glance looks like a nice addition.

Disclaimer: I am not related in any way with the mentioned plugin, just a happy user.

Ekopalypse

@astrosofista said in Multi-cursor editing:

Anyway I still believe that the conjuntion of both the plugin and your script creates a better tool.

Can be the case absolutely, @dail does a great job with all of his plugins. :-)

By the way, have you plans to make the plugin able to search for partial words? At first glance looks like a nice addition.

Just select the part of the word you are interest in and it should respect it already. This is a scintilla feature not really my work.

dail

@Ekopalypse I use BetterMultiSelection in conjunction with LuaScript to select multiple instances and then edit them simultaneously…works quite nicely.

Ekopalypse

@dail

I have no doubt that this works great. :-)

astrosofista

@Ekopalypse said in Multi-cursor editing:

Just select the part of the word you are interest in and it should respect it already. This is a scintilla feature not really my work.

Yes, it works fine… almost all the time. In one of my tests Notepad++ ceased to respond and have to quit it via the taskbar.

Better stop for today.

guy038

Hello, @czmaniak, @alan-kilobrn, @peterjones, @ekopalypse, @astrosofista,

In that discussion, I suppose that the Multi-Editing option is enabled, in >Settings > Preferences... > Editing and that the BetterMultiSelection and PythonScript plugins are both installed, in your N++ configuration !

It may be worth to note that, by default, in Notepad++, the multiple cursors editing feature behave differently from the column mode editing and that it is identical only if you install and enable the Better MultiSelection plugin of @dail !

For instance, assuming the five lines, below, the BetterMultiSelection not enabled and the Python script not used :

12 56498><717 5123 131
21 78483><000 0456 235
16 89410><575 5156 464
97 89411><056 6045 454
01 25822><644 8970 544

If you create a zero-length column selection, through these five lines, between the > and < chars, you’re able to
type in some chars, even tabulations and/or spaces and you may delete few chars, with the backspace or the Delete key.

However, as soon as you want to use, for instance, the right arrow key or the Ctrl + Left shortcut, the Home or End key and even the Enter key, these commands do not act for all the lines of the column selection

Now, click between the > and < chars of the first line. Then, holding down a Ctrl key, click, at the same location, for line 2 to 5. The screen seems similar to before but, this time, we get, I would say, something like a 5 one-line column selection ( instead a 1 five-line column selection ) !

Therefore, the use of the arrow keys, shortcuts involving arrow keys, the the Home, End key and Enter key correctly act as expected ;-))

The good news is that IF you enable the BetterMultiselection @Dail’s plugin, from within N++, you can, use this enhanced behaviour, too, when creating a classical column selection ;-))

Obviously, the @ekopalypse’s python script does not create a column selection but, indeed, places individual cursors on every line, containing a specific word. This explains why if we use the @ekopalypse’s python script, below, we do not need the BetterMultiSeelection, in conjunction !

from Npp import editor
first_line = editor.getFirstVisibleLine()
editor.setTarget(0, editor.getTextLength())
editor.multipleSelectAddEach()
editor.rotateSelection()
editor.setFirstVisibleLine(first_line)

Of course, this script solution seems more flexible, because it places all the cursors at the end of a specific selected word, so, not necessarily at the same column, in each line !

Now, and a bit off-topic, I would like some information from Python guru’s people ;-))

In order to realize this post, I decided to install, manually, on my portable N++ v7.8.5 release, the last V1.5.3 version of the PythonScript plugin, from :

https://github.com/bruderstein/PythonScript/releases

First, I did not know to choose between the PythonScript_Full_1.5.3.0.zip and the PythonScript_Full_1.5.3.0_PluginAdmin.zip archives ! After downloading the two archives, I just realized that they were strictly identical and, also, verified, with WinMerge, that their contents were the same !? So what ?
Then I created, as usual, a PythonScript sub-folder, in the Plugins folder
Opening the archive PythonScript_Full_1.5.3.0.zip, I noticed that the two dll Python27.dll and PythonScript were at the same level. So, I supposed that, from now on, the Python27.dll file wasn’t anymore along with the Notepad++.exe file
Therefore, I just extracted all the contents of the archive in the PythonScript sub-folder, that I just created
However, during N++ start-up, I got the message, in French :

“This application could not start because python27.dll cannot be found. …”

Luckily, putting back the Python27.dll library, along with Notepad++.exe, everything is back to normal ;-)) And the consultation of the v1.5.3 documentation works just fine, too, from its new location !

Best Regards,

guy038

Alan Kilborn

@guy038 said in Multi-cursor editing:

PythonScript_Full_1.5.3.0.zip and the PythonScript_Full_1.5.3.0_PluginAdmin.zip … they were strictly identical

I also confirm this.
No idea as to the “why” of it.

“This application could not start because python27.dll cannot be found. …”

This part I could NOT duplicate.
For me it worked just fine with python27.dll in the PythonScript subfolder under Plugins.