what are list Regex available "named capture group" for find and replace in current version

guy038 · Jul 17, 2022, 8:43 AM

Hello, @jergen-ross-estaco ,

Be a little patient. I’m elaborating a reply !

See you later,

guy038

guy038 · Jul 17, 2022, 9:01 PM

Hello, @jergen-ross-estaco, @peterjones and All,

First, I advice you to read these two posts, first :

https://community.notepad-plus-plus.org/post/15930

https://community.notepad-plus-plus.org/post/52715

As you can see, in replacement, the following regexes :

\g{size} \g{size_type} | \g{file}\g{type}\r\n\t\g{path}\r\n
\k{size} \k{size_type} | \k{file}\k{type}\r\n\t\k{path}\r\n
\g<size> \g<size_type> | \g<file>\g<type>\r\n\t\g<path>\r\n
\k<size> \k<size_type> | \k<file>\k<type>\r\n\t\k<path>\r\n

are totaly invalid !

The only BOOST valid syntax, for named capturing groups, in the replacement regex, is :

$+{size} $+{size_type} | $+{file}$+{type}\r\n\t$+{path}\r\n

Here is, below, your search regex, slighly modified, using the free-spacing mode (?x), which can easily be modified, if necessary :

In some parts, I used non-capturing groups, in order that you may use numbered groups, instead of the named groups, in the replacement regex

SEARCH

(?x-s)            # FREE-SPACING mode + DOT matches STANDARD chars ONLY, not EOL
^  [\t\x20]*      # OPTIONAL range of TAB/SPACE chars
(?<size>          # BEGINNING of the first NAMED group "size" [ or (?'size' ]
  (?:             #   NON-CAPTURING group
    [+-]?         #     OPTIONAL sign + or -
    (?:           #     NON-CAPTURING group
      [0-9]{1,3}  #       From 1 to 3 DIGITS
      (?:         #       NON-CAPTURING group
        ,[0-9]{3} #         COMMA followed with THREE digits
      )*          #       END, REPEATED from 0 to MORE
    |             #     OR
      \d+         #       ONE or MORE digits
    )             #     END
    (?:           #     NON-CAPTURING group 
      \. [0-9]+   #       a DOT followed with some DIGITS
    )?            #     END of the OPTIONAL part
  )               #   END
|                 # OR
  \d* \. \d+      #   OPTIONAL INTEGER part followed with a DOT and some DIGITS
)                 # END of the first NAMED group
[\t\x20]*         # OPTIONAL range of TAB/SPACE chars
(?<size_type>     # BEGINNING of the second NAMED group "size_type" [ or (?'size_type' ]
  (?i) gb|mb|m|g  #   String  'gb' or 'mb' or 'm' or 'g', INSENSITIVE
)                 # END of the second NAMED group
[\t\x20]*         # OPTIONAL TAB or SPACE characters
(?<path>          # BEGINNING of the third NAMED group "path" [ or (?'path' ]
  (?i:C|D): .+ \\ #   EXACT string 'C' or 'D' followed by the GREATEST range of STANDARD chars till the LAST ANTI-SLASH of CURRENT line
)                 # END of the third NAMED group
(?<file>          # BEGINNING of the fourth NAMED group "file" [ or (?'file' ]
  .+              #   The GREATEST range of STANDARD chars till...
)                 # END of the fourth NAMED group
(?<type>          # BEGINNING of the fifth NAMED group "type" [ or (?'type' ]
  \.  .+          #   The LAST '.' char of CURRENT line, followed with the GREATEST range of STANDARD chars, till the END of LINE
)                 # END of the fifth NAMED group

REPLACE $+{size} $+{size_type} | $+{file}$+{type}\r\n\t$+{path}\r\n

or

REPLACE \1 \2 | \4\5\r\n\t\3\r\n

Note that, without the free-spacing mode (?x), the search regex becomes :

(?-s)^[\t\x20]*(?<size>(?:[+-]?(?:[0-9]{1,3}(?:,[0-9]{3})*|\d+)(?:\.[0-9]+)?)|\d*\.\d+)[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D):.+\\)(?<file>.+)(?<type>\..+)

So, from this INPUT text :

          5.7 GB  D:\Movies by Jen\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP.mkv

whatever the search and replacement regex used, you should always get this OUTPUT text :

5.7 GB | Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP.mkv
	D:\Movies by Jen\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP\

If you decide to use the regex with the free-spacing mode, simply select all the text between (?x-s) and # END of the fifth NAMED group ( 2,045 bytes ). Note that the maximum of bytes, for the search field, is limited to 2,046 bytes !

In summary, the 6 syntaxes \g{name}, \g<name>, \g'name', \k{name}, \k<name> and \k'name' are not deprecated but can only be used in the search part ( not in replacement ) !

Best Regards

guy038

PeterJones · Jul 17, 2022, 8:39 PM

@guy038 said in what are list Regex available "named capture group" for find and replace in current version:

As you can see, in replacement, the following regexes … are totally invalid

I should have remembered that. We even added a very clear note in the replacement section of the user manual:

Please note: the \g… and \k… backreference syntaxes only work in the search expression, and are not designed or intended to work in the substitution/replacement expression.

There is a similar note in the searching section’s “numbered backreference”:

Numbered Backreference: These syntaxes match the ℕth capture group earlier in the same expression. (Backreferences are used to refer to the capture group contents only in the search/match expression; see the Substitution Escape Sequences for how to refer to capture groups in substitutions/replacements.)

… but apparently not in the [“named backreference”](Named Backreference)… I guess it needs to be spelled out there, too, even thought it’s just a few lines down in the docs.

Jergen Ross Estaco · Jul 25, 2022, 11:54 AM

@guy038 and @PeterJones.

First, I advice you to read these two posts, first :

I have already read since I tired searched before this post

I didn’t read non-capturing, am I missed read?,
also I didn’t know \x20 instead \s.

\x20 is necessary aka space character? but why \s?

you wrote “x” from ?x-s

(?x-s) # FREE-SPACING mode + DOT matches STANDARD chars ONLY, not EOL

but you didn’t write “x” from (?-s)

(?-s)^[\t\x20]*(?<size>(?:[+-]?(?:[0-9]{1,3}(?:,[0-9]{3})*|\d+)(?:\.[0-9]+)?)|\d*\.\d+)[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D):.+\\)(?<file>.+)(?<type>\..+)

I like that name group with start group subexp
example like my regex previous:
(?<name>subexp)

and your regex
(?<name>(subexp))

btw, now I can’t figure out when search can’t match part line

         4.0 GB  C:\pagefile.sys
         1.5 GB  C:\hiberfil.sys

also can’t match file type will skipped line because they don’t have extension like

       100.0 MB  C:\Users\Username\AppData\Local\Google\Chrome Beta\User Data\Default\Cache\Cache_Data\data_3

you can help me?
If you can’t? please disregard this, fine.

If you decide to use the regex with the free-spacing mode, simply select all the text between (?x-s) and # END of the fifth NAMED group ( 2,045 bytes ). Note that the maximum of bytes, for the search field, is limited to 2,046 bytes !

How I do check get bytes in search field?

anyway, thank you for help and answer.

guy038 · Jul 26, 2022, 8:35 AM

Hi, @jergen-ross-estaco,

Before answering your questions, in a next post, could you tell me which of the four cases, below, will never happen ?

A  5.7 GB D:\Movies by Jen\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP.mkv
B  5.7GB D:\Movies by Jen\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP.mkv
C  5.7 GBD:\Movies by Jen\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP.mkv		  
D  5.7GBD:\Movies by Jen\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP\Memory.2022.1080p.WEBRip.DD5.1.x264-NOGRP.mkv

I also revisited my post and change the part of the regex regarding the size, as below :

(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})*|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))

For instance, this regex matches all the following cases, from A to Z and @

A  1                     E  +1                     I  -1  
B  12345                 F  +12345                 J  -12345
C  1234.0123             G  +1234.0123             K  -1234.0123
D  123456.789            H  +123456.789            L  -123456.789

M  1,234                 P  +1,234                 S  -1,234
N  12,345.01             Q  +12,345.01             T  -12,345.01
O  1,234,567.0123        R  +1,234,567.0123        U  -1,234,567.0123

V  .0                    X  +.0                    Z  -.0
W  .01234                Y  +.01234                @  -.01234

In the same way, could you tell me which cases are sure to not happen ?

I’ll provide you a correct and final regex solution, very soon !

See you later,

Best Regards,

guy038

Jergen Ross Estaco · Aug 1, 2022, 4:57 PM

@guy038, @PeterJones and all.

I trying what I said my explain. you know I’m deaf because slow learn, mistake grammar and sentence or bad? but I hope u understand me.

Before answering your questions, in a next post, could you tell me which of the four cases, below, will never happen ?

I tested use regex to four cases are look fine working because ‘[\t\x20]’ if no space will no failed and next step. but look similar ‘\s’.

I also revisited my post and change the part of the regex regarding the size, as below :
(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})*|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))
For instance, this regex matches all the following cases, from A to Z and @
…
In the same way, could you tell me which cases are sure to not happen ?

‘A,E,I,M-Z and @’ are correct

not all, ‘B-C,F-H, andJ-L’ are match two group that “123” and any digit. if when you use find and replace “foo” will result is “foofoo” meanwhile “123” and “4.0123” to “foo” “foo”

input and output:

A  1                     E  +1                     I  -1  
B  12345                 F  +12345                 J  -12345
C  1234.0123             G  +1234.0123             K  -1234.0123
D  123456.789            H  +123456.789            L  -123456.789

M  1,234                 P  +1,234                 S  -1,234
N  12,345.01             Q  +12,345.01             T  -12,345.01
O  1,234,567.0123        R  +1,234,567.0123        U  -1,234,567.0123

V  .0                    X  +.0                    Z  -.0
W  .01234                Y  +.01234                @  -.01234

A  foo                     E  foo                     I  foo  
B  foofoo                 F  foofoo                 J  foofoo
C  foofoo             G  foofoo             K  foofoo
D  foofoo            H  foofoo            L  foofoo

M  foo                 P  foo                 S  foo
N  foo             Q  foo             T  foo
O  foo        R  foo        U  foo

V  foo                    X  foo                    Z  foo
W  foo                Y  foo                @  foo

I fixed replaced ‘`*`’ to ‘`+`’ from where is end of comma and three digit group ‘`(?:,[0-9]{3})+`’ will matched “1234.0123”.

(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})+|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))

if * is zero or more if no comma or more will match passed.
+ is one or more which required at least one comma or more if no comma will next step to ‘|\d+’ is alternative match any number and decimal if don’t have comma separated number instead.

input and output result: all matched without double “foo” also Replace “number” to “foo” are corrected

A  1                     E  +1                     I  -1  
B  12345                 F  +12345                 J  -12345
C  1234.0123             G  +1234.0123             K  -1234.0123
D  123456.789            H  +123456.789            L  -123456.789

M  1,234                 P  +1,234                 S  -1,234
N  12,345.01             Q  +12,345.01             T  -12,345.01
O  1,234,567.0123        R  +1,234,567.0123        U  -1,234,567.0123

V  .0                    X  +.0                    Z  -.0
W  .01234                Y  +.01234                @  -.01234

A  foo                     E  foo                     I  foo  
B  foo                 F  foo                 J  foo
C  foo             G  foo             K  foo
D  foo            H  foo            L  foo

M  foo                 P  foo                 S  foo
N  foo             Q  foo             T  foo
O  foo        R  foo        U  foo

V  foo                    X  foo                    Z  foo
W  foo                Y  foo                @  foo

btw, I changed that size put my regex.

I realized mentioned that

btw, now I can’t figure out when search can’t match part line
     4.0 GB  C:\pagefile.sys
     1.5 GB  C:\hiberfil.sys

I mean There is no folder or it’s drive letter but I need figure out match ‘c:/’ for ‘(?<path>)’ and now,
I have solved my myself that removed ‘:’ before dot character from ‘(?i:C|D):.+\\)’ because already “+” is one or more, this is at least match one character which is matched ‘\’ will start current position after ‘\’ when ‘\\’ will searching ‘\’ character until start current position but not found match ‘\’ error , so removed ‘:’ become when ‘+’ is matched to ‘:’ will start current position after ‘:’, found match ‘\’ from ‘C:\’ It will worked match zero folder or more level. (c:\ or c:\folder1\subfolder\subfolder2\...)

Regex: (?<path>(?i:C|D).+\\)

and again I mentioned that

also can’t match file type will skipped line because they don’t have extension like
   100.0 MB  C:\Users\Username\AppData\Local\Google\Chrome Beta\User Data\Default\Cache\Cache_Data\data_3

I added lookaround and alternative ‘(?<file>.+(?=\.)|.+)(?<type>(?:\..+)?$)’ will match filename if have extension or not.

(?<file>...)
.+(?=\.) is one or more any character before positive lookahead with match ‘.’ dot character. It’s match filename before dot character as file extension if no dot character will next step to ‘|.+’ is alternative match filename if don’t have extension instead.
(?<type>...)
\..+)?$ is optional dot character and one or more any character. as optional file extension.

I finally made my regex :

(?-xs)^[\t\x20]*(?<size>[+-]?(?:(?:\d{1,3}(?:,\d{3})+|\d+)(?:\.\d+)?|\.\d+))[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D).+\\)(?<file>.+(?=\.)|.+)(?<type>(?:\..+)?$)

or

(?-xs)^[\t\x20]*(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})+|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D).+\\)(?<file>.+(?=\.)|.+)(?<type>(?:\..+)?$)

completed found all matched lines 100/100 in my input text.

              4.0 GB  C:\pagefile.sys
              1.8 GB  C:\Users\Jhecrose\Downloads\uTorrent\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG.mp4
              1.5 GB  C:\hiberfil.sys
            900.1 MB  C:\Games\MBAACC\0002.p
            851.8 MB  C:\$MFT
            569.6 MB  C:\Program Files (x86)\Steam\steamapps\common\Left 4 Dead 2\left4dead2\addons\workshop\1504837401.vpk

after replaced, result output:

4.0 GB | pagefile.sys
	C:\

1.8 GB | Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG.mp4
	C:\Users\Username\Downloads\uTorrent\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG\

1.5 GB | hiberfil.sys
	C:\

900.1 MB | 0002.p
	C:\Games\MBAACC\

851.8 MB | $MFT
	C:\

569.6 MB | 1504837401.vpk
	C:\Program Files (x86)\Steam\steamapps\common\Left 4 Dead 2\left4dead2\addons\workshop\

I’m sorry if you confuse when you read this.
thank you, so much! this case is close now but I’m waiting for my pervious question.

guy038 · Aug 2, 2022, 1:35 AM

Hello, @jergen-ross-estaco, @peterjones and All,

I ended up with this search regex :

SEARCH (?-s)^[\t\x20]*(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})+|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D):.*\\)(?<file>.+)(?<type>\..+)?

This regex is slightly shorter than yours :

I removed the useless x modifier, at beginning of the regex, as the regex is mono line !
I kept your regexes regarding the <size> and <size_type> named groups
I modified the <path>, <file> and <type> named groups as below :
- I used a * after the part (?i:C|D):, needed when files are located right under the root
- I added a ?, right after the named group (?<type>\..+), for the case of files without extension

Like you, my regex version matches all the cases of your INPUT file :

              4.0 GB  C:\pagefile.sys
              1.8 GB  C:\Users\Jhecrose\Downloads\uTorrent\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG.mp4
              1.5 GB  C:\hiberfil.sys
            900.1 MB  C:\Games\MBAACC\0002.p
            851.8 MB  C:\$MFT
            569.6 MB  C:\Program Files (x86)\Steam\steamapps\common\Left 4 Dead 2\left4dead2\addons\workshop\1504837401.vpk

Now, regarding your question :

How I do check get bytes in search field?

It’s quite easy : Select a range of characters and, simply, look right after the indication Sel :, in the status bar, at bottom of the Notepad++ window !

Best Regards

guy038

Jergen Ross Estaco · Aug 2, 2022, 8:15 AM

Hi @guy038,

(?<type>\..+)?

Same I tried but I have problem (?<type>) won’t match instead both file and extension will match (?<file>) cause this is one .+ will start current position to end of line will (?<type>) is not found match which is searching to current end of line or won’t search back to steps character.

try test what’s going happen:
Replace: File:\x20\4\r\ntype:\x20\5\r\n

expected behavior:

I used my regex Find: (?-s)^[\t\x20]*(?<size>[+-]?(?:(?:\d{1,3}(?:,\d{3})+|\d+)(?:\.\d+)?|\.\d+))[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D).+\\)(?<file>.+(?=\.)|.+)(?<type>(?:\..+)?)$

File: The.Sea.Beast.2022.1080p.WEBRip.x264-RARBG
type: .mp4

File: The.Unbearable.Weight.of.Massive.Talent.2022.1080p.WEBRip.x264-RARBG
type: .mp4

File: Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG
type: .mp4

File: hiberfil
type: .sys

actual behavior:

used your regex:

File: The.Sea.Beast.2022.1080p.WEBRip.x264-RARBG.mp4
type: 

File: The.Unbearable.Weight.of.Massive.Talent.2022.1080p.WEBRip.x264-RARBG.mp4
type: 

File: Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG.mp4
type: 

File: hiberfil.sys
type:

you have tried debugger in regex? better this, I find out happen regex getting error or problem. btw, I’m using two regex editor are:

for regex101.com, quick hilghlight match and group and very easily debugger show one by one steps is useful
for notepad++, before use test output depends their boost engine.

It’s quite easy : Select a range of characters and, simply, look right after the indication Sel :, in the status bar, at bottom of the Notepad++ window !

uh, I was just looking sel : is just number?! or is that bytes? I didn’t see bytes

guy038 · Aug 2, 2022, 4:54 PM

Hi, @jergen-ross-estaco, @peterjones and All,

You are perfectly right about my regex : it did not respect the named groups :-((

I finally succeeded to build a correct search regex, ( 2 characters longer than yours, if I subsitute the \d by the [0-9] syntax ! )

It uses a particular feature, not very-well known : the Branch Reset mechanism, with the (?|pattern_1|pattern_2|....|pattern_N) syntax

Refer to this link for further explanations :

https://www.boost.org/doc/libs/1_78_0/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html#boost_regex.syntax.perl_syntax.branch_reset

So, given this INPUT text :

              4.0 GB  C:\pagefile.sys
              1.8 GB  C:\Users\Jhecrose\Downloads\uTorrent\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG.mp4
              1.5 GB  C:\hiberfil.sys
            900.1 MB  C:\Games\MBAACC\0002.p
            851.8 MB  C:\$MFT
            569.6 MB  C:\Program Files (x86)\Steam\steamapps\common\Left 4 Dead 2\left4dead2\addons\workshop\1504837401.vpk

              1.8 MB  C:\pqr.tuv.xyz.123
              1.8 MB  C:\xyz.123
              1.8 MB  C:\xyz
              1.8 MB  C:\abc\def\ghi\pqr.tuv.xyz.123
              1.8 MB  C:\abc\def\ghi\xyz.123
              1.8 MB  C:\abc\def\ghi\xyz

The following regex S/R :

SEARCH (?-s)^[\t\x20]*(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})+|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D):.*\\)(?|(?<file>.+)(?<type>\..+)|([^.\r\n]+))

REPLACE Path : \3\r\nFile : \4\r\nExtension : \5\r\n

will give this OUTPUT text :

Path      : C:\
File      : pagefile
Extension : .sys

Path      : C:\Users\Jhecrose\Downloads\uTorrent\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG\
File      : Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG
Extension : .mp4

Path      : C:\
File      : hiberfil
Extension : .sys

Path      : C:\Games\MBAACC\
File      : 0002
Extension : .p

Path      : C:\
File      : $MFT
Extension : 

Path      : C:\Program Files (x86)\Steam\steamapps\common\Left 4 Dead 2\left4dead2\addons\workshop\
File      : 1504837401
Extension : .vpk


Path      : C:\
File      : pqr.tuv.xyz
Extension : .123

Path      : C:\
File      : xyz
Extension : .123

Path      : C:\
File      : xyz
Extension : 

Path      : C:\abc\def\ghi\
File      : pqr.tuv.xyz
Extension : .123

Path      : C:\abc\def\ghi\
File      : xyz
Extension : .123

Path      : C:\abc\def\ghi\
File      : xyz
Extension :

If you prefer to use the named groups in replacement, the following regex S/R :

SEARCH (?-s)^[\t\x20]*(?<size>[+-]?(?:(?:[0-9]{1,3}(?:,[0-9]{3})+|[0-9]+)(?:\.[0-9]+)?|\.[0-9]+))[\t\x20]*(?<size_type>(?i)gb|mb|m|g)[\t\x20]*(?<path>(?i:C|D):.*\\)(?|(?<file>.+)(?<type>\..+)|([^.\r\n]+))

REPLACE Path : $+{path}\r\nFile : $+{file}\r\nExtension : $+{type}\r\n

will return the same OUTPUT text :

Path      : C:\
File      : pagefile
Extension : .sys

Path      : C:\Users\Jhecrose\Downloads\uTorrent\Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG\
File      : Paws.of.Fury.The.Legend.of.Hank.2022.1080p.WEBRip.x264-RARBG
Extension : .mp4

Path      : C:\
File      : hiberfil
Extension : .sys

Path      : C:\Games\MBAACC\
File      : 0002
Extension : .p

Path      : C:\
File      : $MFT
Extension : 

Path      : C:\Program Files (x86)\Steam\steamapps\common\Left 4 Dead 2\left4dead2\addons\workshop\
File      : 1504837401
Extension : .vpk


Path      : C:\
File      : pqr.tuv.xyz
Extension : .123

Path      : C:\
File      : xyz
Extension : .123

Path      : C:\
File      : xyz
Extension : 

Path      : C:\abc\def\ghi\
File      : pqr.tuv.xyz
Extension : .123

Path      : C:\abc\def\ghi\
File      : xyz
Extension : .123

Path      : C:\abc\def\ghi\
File      : xyz
Extension :

To end with, in the status bar, the Sel : field gives you the number of characters ( not bytes) of the current selection !

BR

guy038

P.S. :

So, in the part (?|(?<file>.+)(?<type>\..+)|([^.\r\n]+)) :

(?<file>.+) represents the named group file ( group 4 )
(?<type>\..+) represents the named group type ( group 5 )
([^.\r\n]+) represents the group 4, too, due to the branch reset syntax

Alan Kilborn · Aug 2, 2022, 5:34 PM

@guy038 said in what are list Regex available "named capture group" for find and replace in current version:

Refer to this link for further explanations :
https://www.boost.org/doc/libs/1_78_0/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html#boost_regex.syntax.perl_syntax.branch_reset

Why not this LINK as well?:

what are list Regex available "named capture group" for find and replace in current version

I fixed replaced ‘*’ to ‘+’ from where is end of comma and three digit group ‘(?:,[0-9]{3})+’ will matched “1234.0123”.

expected behavior:

actual behavior:

I fixed replaced ‘`*`’ to ‘`+`’ from where is end of comma and three digit group ‘`(?:,[0-9]{3})+`’ will matched “1234.0123”.