not able to see the search results windows in notepad++

James Johnson

I am also having this issue. I have tried the suggested fixes, but the results window isn’t hidden, it’s just not there. F7 and then Alt+Space just result in the context menu appearing on the main notepad++ window. This tells me that the results window doesn’t exist. It doesn’t matter if I find all in current or all opened, the dialog goes away and no results window gets spawned.

PeterJones

@James-Johnson said in not able to see the search results windows in notepad++:

F7 and then Alt+Space just result in the context menu appearing on the main notepad++ window. This tells me that the results window doesn’t exist.

Or it tells you that it’s docked and just shrunk so far that you cannot see it. Or you have hit F7 too many (or too few) times, so you re-selected the Notepad++ window accidentally.

Run the following:

Ctrl+F => FIND WHAT: x, FIND ALL IN CURRENT DOCUMENT
Hit Alt+Spacebar at this time, without having clicked anywhere else
- If the Search Results window is docked, the main Notepad++ menu will show
- If the Search Results window is floating somewhere else, and if you don’t see it, then type the M to try to move it
If you clicked somewhere in your editor window first, then F7 once will take you to the Search Results docked-panel or floating-window, and F7 a second time will take you back to Notepad++ editor panel

Another thing you can do: if you look at Search menu and Search Result Window is greyed out, that means that you haven’t yet run a Find-All style search

If you still cannot figure it out, show some screenshots of your Find dialog on top of the Notepad++ window, and then what the Notepad++ window looks like after the Find window is gone. If you have sensitive data, I recommend closing all your normal files, and instead just have a dummy file, with or without xes in it, and use the experimental search I suggested above.

James Johnson

@PeterJones None of that worked. I ended up uninstalling, then deleting the appdata\roaming\notepad++ folder and then re-installing. It’s working now. I just need to restore my backup folder.

Kriston Renshaw

Was there ever a ix for this? Still not working

PeterJones

@Kriston-Renshaw ,

No one has given any steps to reproduce. No one has provided any data or screenshots to show a problem. I, on the other hand, showed what was likely taking place, and no one was able to come up with data to show it wasn’t what was happening. The user who claimed that deleting the %Appdata%\Notepad++ hierarchy solved it actually strengthened my case, rather than weakened it, because the only saved setting that would have been affected by the old settings being deleted is the positioning of the panel/window.

I still maintain that if the circumstances are as the original poster claimed, and all subsequent posters have tacitly agreed to, that either the Search Results Window is undocked, and off screen or hidden, or that it’s docked but shrunk so tiny that they don’t notice it.

Without steps to reproduce, and with it only being a discussion in a forum of users with no official bug report made, I am not sure how anyone could think the problem (if there is one with the software and not with the user) could be fixed yet.

If you want to provide data – like a screenshot so I can examine the edges to show which edge to , and evidence that you’ve run the “find all in current document” or “find all in all opened documents” or “find in projects” or “find in files”, and the ?-menu’s Debug Info, and anything else other than the vague claim that it’s “still not working” (because it is still working for me).

BTW: As a fellow user, I and the other members of this forum cannot fix Notepad++ for you. However, if you can explain the problem enough that I or another “forum regular” can reproduce your problem, we can point you to the FAQ that explains how to make a bug report. But until we can reproduce it, we’re likely to continue working under the interpretation that we need to just help you figure out what’s going wrong on your end.

Alan Kilborn

@PeterJones

That is one of the best responses I’ve ever read on this site. Right on!

PeterJones

@Kriston-Renshaw ,

I did some experimenting. If you do the following sequence, I can tell you most likely where your Find Results window will be.

Open the Find Dialog.
Set Find what to something you know exists in the current docuemnt
Run Find all in current document
- if Find Results Window shows up as either a window or a panel, your problem is solved. Otherwise, continue
Exit Notepad++ completely
Use Explorer to go to %AppData%\Notepad++ 🛈, and for config.xml, Open With Microsoft’s Notepad (the default windows “Notepad” app, not Notepad++)

Copy the following two groups of lines, and paste into your reply:

The “AppPosition”:

<GUIConfig name="AppPosition" x="1834" y="39" width="1419" height="700" isMaximized="no" />

The complete “Docking Manager” section:

<GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200">
    <FloatingWindow cont="4" x="2519" y="308" width="2860" height="446" />
    <PluginDlg pluginName="Notepad++::InternalFunction" id="44085" curr="0" prev="-1" isVisible="yes" />
    <PluginDlg pluginName="Notepad++::InternalFunction" id="0" curr="4" prev="3" isVisible="yes" />
    <ActiveTabs cont="0" activeTab="0" />
    <ActiveTabs cont="1" activeTab="-1" />
    <ActiveTabs cont="2" activeTab="-1" />
    <ActiveTabs cont="3" activeTab="-1" />
    <ActiveTabs cont="4" activeTab="0" />
</GUIConfig>

It may have a lot more lines than that. But I need everything between <GUIConfig name="DockingManager" and </GUIConfig> in order to help you find your Search Results window.

Kriston Renshaw

@PeterJones

YESSSSSSSSSSSSSSSSSSSSSSSSSSS!

Thanks! I changed the Config to what you mentioned… it popped up after a new search

PeterJones

@Kriston-Renshaw said in not able to see the search results windows in notepad++:

Thanks! I changed the Config to what you mentioned… it popped up after a new search

I’m glad it worked for you.

For the future, bear in mind that if you have other docked panels (function list or folder-as-workspace or plugin panels or what have you), just blindly replacing that section of config.xml will undo any positioning you had on those. I was originally going to coach you through which settings to change, so that it wouldn’t affect anything else. But since it worked this time, it all worked out.

PeterJones

Future Readers,

If you find yourself having this same problem, please follow the steps I outlined above and share that information with us.

It may be that there is useful information contained in that which will help us determine whether there’s just been occasional user error, or whether there’s something endemic to N++ that is causing random/infrequent corruption to those settings and thus hiding the Search Results window. If you just replace that section without sharing it, the information is lost (and if there is an underlying problem causing it, it cannot be solved due to lack of information).

Kriston Renshaw

@PeterJones

This was the data in previous config:

PeterJones

@Kriston-Renshaw ,

Thanks for sharing that.

Do you see that topHeight="0"? That says that height of the “top” docking panel is 0 pixels wide. If you had followed my instructions earlier in the discussion (before you chimed in) and put your cursor at each of the edges of the editing panel, you would have seen the ↕ cursor appear, and you could have dragged the size of that panel.

(Though I will admit, on the top panel, it’s not as obvious because of the tabbar. See the end of this post for a helpful guide for where to look for the “gaps”)

If the panel is 0-width at the top, then there is a gap between the tabbar top and the bottom of the toolbar, and the cursor on that border will be a ↕

If you click-and-drag that ↕ cursor a little down, you will see the Search results window start showing up.

… and if you keep going, the whole panel appears.

OTOH, if there is no panel in that top section, then there is no gap (or the gap is smaller), and the cursor stays normal:

Here is a screenshot with four panels, all of them hidden. I have drawn red arrows showing where the small “gaps” in the GUI are for each edge. Whenever you have a “missing panel”, check these four areas looking for a ↕ or ↔ cursor, which can be used to click-and-drag to resize the panel.

Or, if you want to edit the config.xml instead, make sure that none of the attributes of <GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200"> have a “0” value: any that do, change to “200” instead (200 is the default value for a fresh Notepad++ instance)

Alan Kilborn

So in the end, when one is “not able to see the search results window” in Notepad++, it is likely the result of a prior user-resize of the panel to zero-height (or zero-width). So, not a bug that could have been “fixed”, in the end. More of a PBKAC.

I’m wondering if it might be a good feature request that if the Search Results Window command on the Search menu is executed AND either the height or width (or forbid, both) is zero, that the default size (apparently 200) gets restored in the process of “showing” the window.

Or, if that’s not liked or there is a logistical problem with doing that, how about something like the mechanism to locate a rogue Find window – if Ctrl+f is pressed and the window location isn’t immediately “findable” (e.g. multiple monitors situation), a second Ctrl+f press will recenter the window on the N++ parent window.

guy038

Hello, @muthuraj-madasamy, @peterjones, @james-johnson, @kriston-renshaw, @alan-kilborn and All,

In case that you cannot see the Search result window, use this simple method :

Close any opened instance of Notepad++
Open your active Config.xml with Microsoft notepad.exe
Replace all the section between the line GUICconfig name="DockingManager" ........> and the line </GUIConfig> by the two lines :

        <GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200">
        </GUIConfig>

Restart Notepad++
Open the Find dialog ( Ctrl + F )
Do a search of a common word of the active tab and click on the Find All in current document button

=> You’ll get the Find Result panel in all cases !

I cannot think of a more simple method ;-))

IMPORTANT :

Of course, this straight method removes any previous panel(s) which were part of your N++ session. However, it should not be difficult to re-open the few panels which are always opened in your session !
However, note that on the first opening of panels, after using my method, it will force them to their default positions, which may be different from your preferred ones !

Now, close Notepad++
Open again your active Config.xml with Microsoft notepad.exe

This time, at the end of the GUIConfig .............</GUIConfig> zone, you should see :

        <GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200">
            <PluginDlg pluginName="Notepad++::InternalFunction" id="0" curr="3" prev="-1" isVisible="yes" />
            <ActiveTabs cont="0" activeTab="-1" />
            <ActiveTabs cont="1" activeTab="-1" />
            <ActiveTabs cont="2" activeTab="-1" />
            <ActiveTabs cont="3" activeTab="0" />
        </GUIConfig>

If we consider the 3 generic lines :

        <GUIConfig name="DockingManager" leftWidth="LW" rightWidth="RW" topHeight="TH" bottomHeight="BH">
            <PluginDlg pluginName="Notepad++::InternalFunction" id="ID" ............ />
            <ActiveTabs cont="P" activeTab="N" />

The value LW of the leftWidth attribute is the width of all the panels docked on the left side
The value RW of the rightWidth attribute is the width of all the panels docked on the right side
The value TH of the topHeight attribute is the height of all the panels docked on the top side
The value BH of the bottomHeight attribute is the height of all the panels docked on the bottom side

And :

The value P of the cont attribute represents the position of the docked panel(s) :
- 0 for panel(s) docked on the left edge
- 1 for panel(s) docked on the right edge
- 2 for panel(s) docked on the top edge
- 3 for panel(s) docked on the bottom edge
- 4 for undocked panel(s)

`

The value N of the activeTab attribute represents the number of the panels docked on that position :
- -1 if no panel is docked on the corresponding edge
- 0 if 1 panel is docked on the corresponding edge
- 1 if 2 panels are docked on the corresponding edge
- 2 if 3 panels are docked on the corresponding edge
- 3 if 4 panels are docked on the corresponding edge

and so on…

To end, the value ID of the id attribute represents the id-number of the panel :
- 0 for the Find Result panel
- 42051 for the Character Panel
- 42052 for the Clipboard History panel
- 44080 for the Document Map panel
- 44081 for the Project Panel 1
- 44082 for the Project Panel 2
- 44083 for the Project Panel 3
- 44084 for the Function List panel
- 44085 for the Folder for Workspace panel
- 44070 for the Document List panel

However, I didn’t verify if that list is the exhaustive one !

One example : if you have, at the end of the GUIConfig section, the five following lines :

        <ActiveTabs cont="0" activeTab="2" />
        <ActiveTabs cont="1" activeTab="3" />
        <ActiveTabs cont="2" activeTab="-1" />
        <ActiveTabs cont="3" activeTab="1" />
        <ActiveTabs cont="4" activeTab="0" />

This means that your current N++ session contains :

3 panels ( 2 + 1 ) which are docked on the left side
4 panels ( 3 + 1 ) which are docked on the right side
0 panel ( -1 + 1 ) which is docked on the top side
2 panels ( 1 + 1 ) which are docked on the bottom side
1 panel ( 0 + 1 ) which is an undocked panel

For a total of 10 panels which can be, either, native N++ panels or plugins panels !

Best Regards,

guy038

Alan Kilborn

@guy038 said in not able to see the search results windows in notepad++:

Replace all the section between the line GUICconfig name=“DockingManager” …> and the line </GUIConfig> by the two lines

I think one of Peter’s points was that maybe user’s don’t want to do this, because they’d lose info on where other panels/windows are placed…

Guy, your discussion makes my niggling old brain think that you discussed all of this once before, in (~~quite~~ / very much) the same detail! :-)
Edit: See HERE. :-)

guy038

Hi, @alan-kilborn,

Alan, I did remember of the post that you mentionned ! But I wanted to rewrite in order to just speak of the simplified method and give quick explanations on the parameters

BR

guy038

PeterJones

Going back to what @Alan-Kilborn said a little earlier:

I’m wondering if it might be a good feature request that if the Search Results Window command on the Search menu is executed AND either the height or width (or forbid, both) is zero, that the default size (apparently 200) gets restored in the process of “showing” the window.

I actually think that would be a good feature request. That would save people who on their last session either accidentally shrunk the panel, or intentionally shrunk it to get it temporarily out of the way, and left it that way without remembering.

But instead of a threshold of 0, I might pick something a little bigger: for example, this shows each of the panels at 10: you can tell something is there, but not necessarily what (depending on which edge):

But a 10 would at least give you enough visible hints that something is there, so maybe you’d try to resize. Whereas with something like 5 or smaller, you might not notice enough to go trying to resize:

So if one of us does make a feature request, I’d suggest a threshold of somewhere between 5 and 10.

guy038

Hello, @peterjones, @alan-kilborn and All,

Note that I updated my first post by adding this section :

IMPORTANT :

Of course, this straight method removes any previous panel(s) which were part of your N++ sessions. However, it should not be difficult to re-open the few panels which are always opened in your N++ session !
However, note that on the first opening of panels, after using my method, it will force them to their default positions, which may be different from your preferred ones !

BR

guy038

guy038

Hello, @muthuraj-madasamy, @peterjones, @james-johnson, @kriston-renshaw, @alan-kilborn and All,

I did some additional tests and I think that my method, to make visible the Find result panel, is not destructive regarding the other panels, previously opened by the user, in his usual N++ session!

To confirm this assumption :

Close any opened instance of Notepad++
Open your active config.xml with Microsoft notepad.exe
Replace all the section between the line GUIConfig name="DockingManager" ........> and the line </GUIConfig> by the two lines :

        <GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200">
        </GUIConfig>

Restart Notepad++

=> You should not remark any opened panel

Click on the Edit > Clipboard History option

=> The Clipboard History panel is displayed, by default, on the right

Open the License.txt
Select the GNU GENERAL PUBLIC LICENSE text and hit the Ctrl+ C shortcut
Select the IMPORTANT NOTEPAD++ LICENSE TERMS text and hit the Ctrl+ C shortcut

=> The Clipboard History panel contains these two expressions

Now, drag and dock the Clipboard History panel on the left side of Notepad++
Open any .txt file with several kilobytes
Click on the View > Document Map option

=> The Document Map panel is displayed, by default, on the right

Move to the middle of that file
Then, drag and dock the Document Map panel on the bottom side of Notepad++
Finally, open the Settings > Edit Popup ContextMenu option

=> The contextMenu.xml file is displayed

Click on the View > Function List option

=> The Function List panel is displayed, by default, on the right

Click on the first line <Item id="0"/> of the contextMenu.xml file

=> The corresponding line is highlighted in the Function List panel

Exit Notepad++

Restart Notepad++

=> You should see, as expected, the three panels Clipboard History, Document Map and Function List at their previous position

In the Document Map and Function List panels, you’ll be able to find, again, the previous displayed text by selecting the appropriate tab

However, note that, now, the Clipboard History panel contains only the last text copied ( IMPORTANT NOTEPAD++ LICENSE TERMS ). This is the normal behaviour !

Close again Notepad++

Open your active config.xml with Microsoft notepad.exe
Replace all this section :

        <GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200">
            <PluginDlg pluginName="Notepad++::InternalFunction" id="42052" curr="0" prev="-1" isVisible="yes" />
            <PluginDlg pluginName="Notepad++::InternalFunction" id="44084" curr="1" prev="-1" isVisible="yes" />
            <PluginDlg pluginName="Notepad++::InternalFunction" id="44080" curr="3" prev="-1" isVisible="yes" />
            <ActiveTabs cont="0" activeTab="0" />
            <ActiveTabs cont="1" activeTab="0" />
            <ActiveTabs cont="2" activeTab="-1" />
            <ActiveTabs cont="3" activeTab="0" />
        </GUIConfig>

With that one :

        <GUIConfig name="DockingManager" leftWidth="200" rightWidth="200" topHeight="200" bottomHeight="200">
        </GUIConfig>

Save the modifications of config.xml
Restart Notepad++

=> Of course, no panel is now displayed !

Click on the Edit > Clipboard History option

=> The Clipboard History panel is opened, by default, on the right side but still displays the last text copied ! ( IMPORTANT NOTEPAD++ LICENSE TERMS )

Click on the View > Document Map option

=> The Document Map panel is opened, by default, on the right side and if you select your previous file, it should display, as expected, the same contents

Click on the View > Function List option

=> The Function List panel is opened, by default, on the right side and if you select the contextMenu.xml file, it displays, as before, the first <Item id="0"/> line, in the Function List panel

So, in summary, my method removes all the panels and forget their preferred user location but does keep the information displayed by these panels, as soon as you re-open them ! Thus, it should not be difficult to get the old configuration of all your previous panels !

Best Regards,

guy038

Alan Kilborn

@Alan-Kilborn said in not able to see the search results windows in notepad++:

I’m wondering if it might be a good feature request that if the Search Results Window command on the Search menu is executed AND either the height or width (or forbid, both) is zero, that the default size (apparently 200) gets restored in the process of “showing” the window.

Official issue opened HERE.