Editor right-click, outside current text selection, lose this selection

[guy038]

Hello, @frying-pan, @alan-kilborn, @lászló-botka and All,

@lászló-botka, you said :

For example I select the text, that I perhaps want to Copy/Cut, then I watch the text moving the mouse until find the text, where I want to copy to, right click Copy/Cut, left click at the desired text on the screen where I want to copy, and right click Paste.

OK, I see ! Personally, I would have used, both, keyboard and mouse :

• Selection of text to be copied elsewhere

• Hit on the Ctrl + C shortcut to place selection into clipboard

• Move of the mouse to the other location where you want to paste the selection

• Left mouse click to specify the new location of the caret

• Right mouse click to get the context menu

• Left mouse click on the Paste option

---

However, to be honest, I’m more a “keyboard-gestures” man than a “mouse-gestures” one ;-))

Best regards

guy038

[Alan Kilborn]

Okay, so after reading @guy038’s response to:

I select the text, that I perhaps want to Copy/Cut, then I watch the text moving the mouse until find the text, where I want to copy to, right click Copy/Cut, left click at the desired text on the screen where I want to copy, and right click Paste.

it helped me to understand it, I think.

If I were doing it that way, I’d have zero confidence that the source block I was copying/cutting was still selected. Much better to have it onscreen (which the current Notepad++ enforces) when copying/cutting it.

But I agree with @guy038 about mouse-vs-keyboard, and here are the actions compared:

mouse :

• move hand from keyboard to mouse (this is a text editor after all)
• right click
• choose copy
• return hand to keyboard (this is a text editor after all)

keyboard :

• press ctrl+c

Even mouse purists (if there are any) would have a hard time arguing with the effort involved. :-)

[Ekopalypse]

@frying-pan

Note, that you only set the hook for one scintilla message queue but
I assume you want it to have for both, don’t you?

Beside that everything is personal coding preferences, just be carefully to call it once.

[guy038]

Hi, @alan-kilborn,

You said :

BTW, I have no clue as to what this means:

To my mind, here are the different operations, described by @lászló-botka :

• First, you select, with the mouse, some text to be pasted elsewhere

• Then you search for the location where to paste the selection. moving the vertical bar of the window up/down to reach the new location ( the selection, which may be out of sight, is still active )

• Now, as you are around the desired location, you right-click to get the context menu

• Then, you left-click on the Copy option, which places present selection into clipboard ( This is the step where Notepad and Notepad++ behaviors differ ! )

• Now, you left-click at the location where you want the contents of clipboard to be inserted

• Again, you right-click to get the context menu

• Finally, you left-click and choose the Paste option

Best Regards,

guy038

[Alan Kilborn]

@guy038 said in Editor right-click, outside current text selection, lose this selection:

To my mind, here are the different operations, described by @lászló-botka :

Yes, I understood this from your earlier clarification. Maybe you had this reply in progress before seeing my earlier reply.

I just still find it odd, but to each his own.

[László Botka]

@guy038 exactly, thank you for making it clear.

[Alan Kilborn]

@László-Botka

I see, it works in Notepad, Wordpad, Ultraedit, although doesn’t work in Winword.

Another notable is Visual Studio 2019, where it works exactly like Notepad++ does.

[László Botka]

I have a rarely used editor installed, Pspad, and it works again as Winword, Notepad ++, Visual Studio 2019.

I see no reason why one program behaves this way and the other that way. Maybe it’s occasional, it works the way it just did, or the way it was natural, simple for the programmer in the development tool.

Since I use Firefox a lot, it’s natural for me to select something, and if I move the mouse by any reason or accidentally, and then do a right click, the selection remains.

[Alan Kilborn]

@László-Botka said in Editor right-click, outside current text selection, lose this selection:

have a rarely used editor installed, Pspad

PsPad is cool! :-)

I like to think of it this way: If I select something with the mouse, and I want to drag-n-drop-move-it, I can’t just point anywhere and click-drag, I have to point to the selected text first. So right-click-copy is analogous.

But yes, points and all views about this are well-taken. Good discussions are what this forum is about.

[frying-pan]

I wonder if explaining why it is very useful to me is needed.

first example : (I copy a lot between different tabs and different applications)
Some text is selected in a notepad++ tab, or any application window, that I need to copy repeatedly.
I activate this tab or window with ctrl+tab/alt+tab, right-click anywhere and ‘copy’,
go back to the other app and right-click anywhere and ‘paste’.
So, I do not have to point every time the selection or the caret for copying/pasting.

second example :
I select some text in a notepad++ tab with the mouse, and immediatly right-click to copy it.
If I have moved just a pixel farther than the selection, then I lose the selection and can not copy it.

Added benefit : Since I can right-click anywhere, I do not have the context-menu appearing above the selection,
so I can check my selection is good…

indeed Microsoft Visual Studio (when editing Microsoft Word macro) is one of the infamous selection-looser
Internet Explorer 11 also…

===

Here is the improved code

• code has been hardened against errors
• the hook still can not be removed (*see below the code why),
  but now can be “de-activated”/“re-activated” by re-running the script
• now hooks all scintilla windows (so incuding the notepad++ second view when splitted)
• added : SHIFT + double left mouse click -> select text from click point until next space/space-like chars

(sorry the two functions SHIFT+double-left-click and right-click can not be “de-activated” separately,
I think a dialog prompt and two separate variables set by console.editor.SetProperty would do that)

# PythonScript which hooks mouse clicks (WndProc HOOK on Scintilla windows)
# * SHIFT + double left mouse click : select text from click point until next space/space-like chars : \s
# * right mouse click : prevent right-click from moving the caret and losing current text selection
# re-run the script to de-activate/re_activate the hook
# Tested on NPP 64 bits (NOT tested on 32 Bits but could be compatible), /!\ this file uses TABS for indent

from Npp import *

import platform
import ctypes
from ctypes import wintypes
import datetime
from datetime import datetime

s_script_name			= "Perso_ScintWndProc_Hook"
s_hook_name				= "Scint_Mouse_Click_Hook"
s_editorprop_regdone	= "SCINTWNDPROCHOOK_DONE"
s_editorprop_active		= "SCINTWNDPROCHOOK_ACTIVE"
s_true					= "TRUE"

GWL_WNDPROC = -4				# used to set a new address for the windows procedure
I_VK_SHIFT		= 0x10			# SHIFT virtual key code
I_VK_CONTROL	= 0x11			# CONTROL virtual key code
I_VK_ALT		= 0x12			# ALT virtual key code
KSTATE_ISDOWN = 0x8000			# key pressed
WM_LBUTTONDBLCLK	= 0x0203	# double left mouse click window message
WM_RBUTTONDOWN		= 0x0204	# right mouse click window message

LRESULT = wintypes.LPARAM
WndProcType = ctypes.WINFUNCTYPE(LRESULT, wintypes.HWND, wintypes.UINT, wintypes.WPARAM, wintypes.LPARAM)

# window message hook functions
CallWindowProc = ctypes.windll.user32.CallWindowProcW
CallWindowProc.restype = LRESULT
CallWindowProc.argtypes = [WndProcType, wintypes.HWND, wintypes.UINT, wintypes.WPARAM, wintypes.LPARAM]

x86 = platform.architecture()[0] == "32bit"
if x86:
	SetWindowLong = ctypes.windll.user32.SetWindowLongW
else:
	SetWindowLong = ctypes.windll.user32.SetWindowLongPtrW
SetWindowLong.restype = WndProcType
SetWindowLong.argtypes = [wintypes.HWND, wintypes.INT, WndProcType]
# end of window message hook functions

EnumWindowsProc				= ctypes.WINFUNCTYPE(wintypes.BOOL, wintypes.HWND, wintypes.LPARAM)
EnumWindows					= ctypes.windll.user32.EnumWindows
EnumChildWindows			= ctypes.windll.user32.EnumChildWindows
RealGetWindowClass			= ctypes.windll.user32.RealGetWindowClassW
GetWindowThreadProcessId	= ctypes.windll.user32.GetWindowThreadProcessId
GetCurrentProcessId			= ctypes.windll.kernel32.GetCurrentProcessId
GetLastError				= ctypes.windll.kernel32.GetLastError
SetLastError				= ctypes.windll.kernel32.SetLastError

GetAsyncKeyState = ctypes.windll.user32.GetAsyncKeyState # used to check if a modifier key is pressed

class C_Scint_Mouse_Click_Hook(): # hook class
	# class constructor
	def __init__(self):
		def Enum_Window_Hwnd(hwnd, lParam):
			arr_enum_window_hwnd.append(hwnd)
			return True

		s_npp_class		= u"Notepad++"
		s_scint_class	= u"Scintilla"

		self.arr_scint_hwnd = []
		self.npp_win_hwnd = 0

		i_cur_pid = GetCurrentProcessId()

		arr_enum_window_hwnd = []
		EnumWindows(EnumWindowsProc(Enum_Window_Hwnd), 0)
		# enum all class="Notepad++" NPP window handles
		buff = ctypes.create_unicode_buffer(len(s_npp_class) + 1 + 1)
		for win_hwnd in arr_enum_window_hwnd:
			RealGetWindowClass(win_hwnd, buff, len(s_npp_class) + 1 + 1)
			if buff.value == s_npp_class:
				# check that found NPP window handle is owned by current process, stop at the first found
				ci_win_pid = wintypes.DWORD(0)
				GetWindowThreadProcessId(win_hwnd, ctypes.pointer(ci_win_pid))
				if i_cur_pid == ci_win_pid.value:
					self.npp_win_hwnd = win_hwnd
					break
		if self.npp_win_hwnd == 0:
			return

		del arr_enum_window_hwnd[:]
		EnumChildWindows(self.npp_win_hwnd, EnumWindowsProc(Enum_Window_Hwnd), 0)
		# enum all class="Scintilla" window handles, childs of NPP window
		# get all of them in arr_scint_hwnd (at least all existing ones at that time)
		buff = ctypes.create_unicode_buffer(len(s_scint_class) + 1 + 1)
		for win_hwnd in arr_enum_window_hwnd:
			RealGetWindowClass(win_hwnd, buff, len(s_scint_class) + 1 + 1)
			if buff.value == s_scint_class:
				self.arr_scint_hwnd.append(win_hwnd)

	def RegHook(self):															# function to register the hook on all found Scintilla windows
		s_npp_class		= u"Notepad++"
		s_scint_class	= u"Scintilla"

		if (self.npp_win_hwnd == 0 or len(self.arr_scint_hwnd) == 0):			# abort if no NPP handle or no Scintilla handle
			return

		self.NewWndProc = WndProcType(self.MyWndProc)							# get the address of our own WndProc

		self.arr_scint_oldwndproc = []
		s_list = "\t" + "Found " + str(len(self.arr_scint_hwnd)) + " " + s_scint_class + " Handle / WindowProc"
		for i in range(0, len(self.arr_scint_hwnd)):
			win_hwnd = self.arr_scint_hwnd[i]
			SetLastError(0)
			oldwndproc = SetWindowLong(win_hwnd, GWL_WNDPROC, self.NewWndProc)	# register and store oldwndproc addresses in arr_scint_oldwndproc
			i_apierr = GetLastError()
			if i_apierr == 0:
				self.arr_scint_oldwndproc.append(oldwndproc)
				s_list = s_list + "\n" + "\t\t" + hex(win_hwnd) + " / " + str(oldwndproc)
			else:
				del self.arr_scint_hwnd[i]
				s_list = s_list + "\n" + "\t\t" + hex(win_hwnd) + " / " + "NO WindowProc, NOT hooked"
		print "\t" + s_npp_class + " Handle = " + hex(self.npp_win_hwnd) + "\n" + s_list

	def MyWndProc(self, hWnd, msg, wParam, lParam):							# our own WndProc function receives windows messages
		oldwndproc = 0
		for i in range(0, len(self.arr_scint_hwnd)):
			if self.arr_scint_hwnd[i] == hWnd:								# target hWnd found at index i in arr_scint_hwnd
				oldwndproc = self.arr_scint_oldwndproc[i]					# corresponding oldwndproc is picked in arr_scint_oldwndproc
				break
		if oldwndproc == 0:													# fatal error ! should not happen...
			print "\t" + s_hook_name + " Fatal error ! oldwndproc = 0"
			notepad.messageBox(s_hook_name + " Fatal error ! oldwndproc = 0", s_script_name)
			return 0

		if (msg != WM_LBUTTONDBLCLK and msg != WM_RBUTTONDOWN):				# if NOT mouse hooked messages : abort
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP
		if console.editor.getProperty(s_editorprop_active) != s_true:		# if hook de-activated : abort
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		b_shift_down	= ((GetAsyncKeyState(I_VK_SHIFT)	& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		b_ctrl_down		= ((GetAsyncKeyState(I_VK_CONTROL)	& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		b_alt_down		= ((GetAsyncKeyState(I_VK_ALT)		& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		if (b_shift_down and b_ctrl_down and b_alt_down):					# if SHIFT and CONTROL and ALT down : unregister
			self.UnRegHook()
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		if (msg == WM_LBUTTONDBLCLK and b_shift_down and not b_ctrl_down and not b_alt_down):
			self.ExtendSelToSpaceLikeChars()								# extend selection from the clicked point to the space-like chars
		elif (msg == WM_RBUTTONDOWN and not b_shift_down and not b_ctrl_down and not b_alt_down):
			dummy = 0														# do nothing
		else:
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		#res = "DEBUG " + s_hook_name
		#res = res + " Message = " + hex(msg) + " to hWnd = " + hex(hWnd)
		#res = res + " Forwarded To oldwndproc = " + str(oldwndproc)
		#print res + " At " + str(datetime.now())
		return CallWindowProc(oldwndproc, hWnd, 0, 0, 0)					# nullify the mouse hooked messages

	def ExtendSelToSpaceLikeChars(self):
		# space-like chars are space/tab/carriage return/line feed/form feed... [\t\n\x0B\f\r\x20\x85\xA0\x{2028}\x{2029}]
		editor.searchAnchor()
		i_start = editor.searchPrev(FINDOPTION.REGEXP, "\s")
		i_start = i_start + 1
		if i_start < 0:
			i_start = 0
		i_end = editor.searchNext(FINDOPTION.REGEXP, "\s")
		if i_end < 0:
			i_end = editor.getTextLength()
		editor.setSel(i_start, i_end)

print "[" + s_script_name + " starts]"
if console.editor.getProperty(s_editorprop_regdone) != s_true:
	console.editor.setProperty(s_editorprop_regdone, s_true)
	console.editor.setProperty(s_editorprop_active, s_true)
	o_scint_mouse_click_hook = C_Scint_Mouse_Click_Hook()	# create an instance of hook class
	o_scint_mouse_click_hook.RegHook()						# set up the mouse hook
	print "\t" + s_hook_name + " registered and ACTIVATED (re-run script to toggle the hook)"
else:
	if console.editor.getProperty(s_editorprop_active) != s_true:
		console.editor.setProperty(s_editorprop_active, s_true)
		print "\t" + s_hook_name + " RE-ACTIVATED (re-run script to toggle the hook)"
		notepad.messageBox(s_hook_name + " RE-ACTIVATED\n(re-run script to toggle the hook)", s_script_name)
	else:
		console.editor.setProperty(s_editorprop_active, "")
		print "\t" + s_hook_name + " de-activated (re-run script to toggle the hook)"
		notepad.messageBox(s_hook_name + " de-activated\n(re-run script to toggle the hook)", s_script_name)

*Breaking the hook chain :
If a hook is set by

self.NewWndProc = WndProcType(self.MyWndProc)
oldwndproc = SetWindowLong(win_hwnd, GWL_WNDPROC, self.NewWndProc)

and then removed by

SetWindowLong(win_hwnd, GWL_WNDPROC, oldwndproc)

that breaks the hook chain if there is more than 1 hook.

original WndProc funcA > hooked by MyWndProc funcB > hooked by MyOtherWndProc funcC
if funcB hook is removed, than funcC will not receive any message after that, and will not be aware of it

Some more sophisticated hook api could solve that problem but I don’t know them.
I chose the easiest way, which is to “de-activate” my hook by just telling him to do nothing,
except silently forwarding the window message to the the next WndProc (oldwndproc).
This way my “de-activated” hook does nothing but does not break the hook chain.

[Alan Kilborn]

@frying-pan said in Editor right-click, outside current text selection, lose this selection:

I wonder if explaining why it is very useful to me is needed.

Not needed, but often I give people that at first seem to want odd things a “hard time” about it, and it draws them out into explaining/justifying their need.

Future readers that come along then get the whole story, and maybe don’t dismiss something that could really be of use.

I think you have done a good job of that, as well as solving your own problem with the script. Nicely done!

[frying-pan]

@Alan-Kilborn

Well, I would not have made Notepad++ my default text editor, if I couldn’t have solved the right-click question.

It’s the first reason I bothered to install PythonScript and learn this syntax (while I’m only accustomed to Pascal/VB/VBS/AutoIt)

And otherwise I use PSPad for its Project features, Notepad++ session and workspace are not as featured.
PSPad is mostly missing code wrapping (if > endif, etc…)

[frying-pan]

Oops, I forgot to delete 3 lines of old code (at line 141 of the script). But I can’t modify any more the previous post.

So the code updated without the bug :

# PythonScript which hooks mouse clicks (WndProc HOOK on Scintilla windows)
# * SHIFT + double left mouse click : select text from click point until next space/space-like chars : \s
# * right mouse click : prevent right-click from moving the caret and losing current text selection
# re-run the script to de-activate/re-activate the hook
# Tested on NPP 64 bits (NOT tested on 32 Bits but could be compatible), /!\ this file uses TABS for indent

from Npp import *

import platform
import ctypes
from ctypes import wintypes
import datetime
from datetime import datetime

s_script_name			= "Perso_ScintWndProc_Hook"
s_hook_name				= "Scint_Mouse_Click_Hook"
s_editorprop_regdone	= "SCINTWNDPROCHOOK_DONE"
s_editorprop_active		= "SCINTWNDPROCHOOK_ACTIVE"
s_true					= "TRUE"

GWL_WNDPROC = -4				# used to set a new address for the windows procedure
I_VK_SHIFT		= 0x10			# SHIFT virtual key code
I_VK_CONTROL	= 0x11			# CONTROL virtual key code
I_VK_ALT		= 0x12			# ALT virtual key code
KSTATE_ISDOWN = 0x8000			# key pressed
WM_LBUTTONDBLCLK	= 0x0203	# double left mouse click window message
WM_RBUTTONDOWN		= 0x0204	# right mouse click window message

LRESULT = wintypes.LPARAM
WndProcType = ctypes.WINFUNCTYPE(LRESULT, wintypes.HWND, wintypes.UINT, wintypes.WPARAM, wintypes.LPARAM)

# window message hook functions
CallWindowProc = ctypes.windll.user32.CallWindowProcW
CallWindowProc.restype = LRESULT
CallWindowProc.argtypes = [WndProcType, wintypes.HWND, wintypes.UINT, wintypes.WPARAM, wintypes.LPARAM]

x86 = platform.architecture()[0] == "32bit"
if x86:
	SetWindowLong = ctypes.windll.user32.SetWindowLongW
else:
	SetWindowLong = ctypes.windll.user32.SetWindowLongPtrW
SetWindowLong.restype = WndProcType
SetWindowLong.argtypes = [wintypes.HWND, wintypes.INT, WndProcType]
# end of window message hook functions

EnumWindowsProc				= ctypes.WINFUNCTYPE(wintypes.BOOL, wintypes.HWND, wintypes.LPARAM)
EnumWindows					= ctypes.windll.user32.EnumWindows
EnumChildWindows			= ctypes.windll.user32.EnumChildWindows
RealGetWindowClass			= ctypes.windll.user32.RealGetWindowClassW
GetWindowThreadProcessId	= ctypes.windll.user32.GetWindowThreadProcessId
GetCurrentProcessId			= ctypes.windll.kernel32.GetCurrentProcessId
GetLastError				= ctypes.windll.kernel32.GetLastError
SetLastError				= ctypes.windll.kernel32.SetLastError

GetAsyncKeyState = ctypes.windll.user32.GetAsyncKeyState # used to check if a modifier key is pressed

class C_Scint_Mouse_Click_Hook(): # hook class
	# class constructor
	def __init__(self):
		def Enum_Window_Hwnd(hwnd, lParam):
			arr_enum_window_hwnd.append(hwnd)
			return True

		s_npp_class		= u"Notepad++"
		s_scint_class	= u"Scintilla"

		self.arr_scint_hwnd = []
		self.npp_win_hwnd = 0

		i_cur_pid = GetCurrentProcessId()

		arr_enum_window_hwnd = []
		EnumWindows(EnumWindowsProc(Enum_Window_Hwnd), 0)
		# enum all class="Notepad++" NPP window handles
		buff = ctypes.create_unicode_buffer(len(s_npp_class) + 1 + 1)
		for win_hwnd in arr_enum_window_hwnd:
			RealGetWindowClass(win_hwnd, buff, len(s_npp_class) + 1 + 1)
			if buff.value == s_npp_class:
				# check that found NPP window handle is owned by current process, stop at the first found
				ci_win_pid = wintypes.DWORD(0)
				GetWindowThreadProcessId(win_hwnd, ctypes.pointer(ci_win_pid))
				if i_cur_pid == ci_win_pid.value:
					self.npp_win_hwnd = win_hwnd
					break
		if self.npp_win_hwnd == 0:
			return

		del arr_enum_window_hwnd[:]
		EnumChildWindows(self.npp_win_hwnd, EnumWindowsProc(Enum_Window_Hwnd), 0)
		# enum all class="Scintilla" window handles, childs of NPP window
		# get all of them in arr_scint_hwnd (at least all existing ones at that time)
		buff = ctypes.create_unicode_buffer(len(s_scint_class) + 1 + 1)
		for win_hwnd in arr_enum_window_hwnd:
			RealGetWindowClass(win_hwnd, buff, len(s_scint_class) + 1 + 1)
			if buff.value == s_scint_class:
				self.arr_scint_hwnd.append(win_hwnd)

	def RegHook(self):															# function to register the hook on all found Scintilla windows
		s_npp_class		= u"Notepad++"
		s_scint_class	= u"Scintilla"

		if (self.npp_win_hwnd == 0 or len(self.arr_scint_hwnd) == 0):			# abort if no NPP handle or no Scintilla handle
			return

		self.NewWndProc = WndProcType(self.MyWndProc)							# get the address of our own WndProc

		self.arr_scint_oldwndproc = []
		s_list = "\t" + "Found " + str(len(self.arr_scint_hwnd)) + " " + s_scint_class + " Handle / WindowProc"
		for i in range(0, len(self.arr_scint_hwnd)):
			win_hwnd = self.arr_scint_hwnd[i]
			SetLastError(0)
			oldwndproc = SetWindowLong(win_hwnd, GWL_WNDPROC, self.NewWndProc)	# register and store oldwndproc addresses in arr_scint_oldwndproc
			i_apierr = GetLastError()
			if i_apierr == 0:
				self.arr_scint_oldwndproc.append(oldwndproc)
				s_list = s_list + "\n" + "\t\t" + hex(win_hwnd) + " / " + str(oldwndproc)
			else:
				del self.arr_scint_hwnd[i]
				s_list = s_list + "\n" + "\t\t" + hex(win_hwnd) + " / " + "NO WindowProc, NOT hooked"
		print "\t" + s_npp_class + " Handle = " + hex(self.npp_win_hwnd) + "\n" + s_list

	def MyWndProc(self, hWnd, msg, wParam, lParam):							# our own WndProc function receives windows messages
		oldwndproc = 0
		for i in range(0, len(self.arr_scint_hwnd)):
			if self.arr_scint_hwnd[i] == hWnd:								# target hWnd found at index i in arr_scint_hwnd
				oldwndproc = self.arr_scint_oldwndproc[i]					# corresponding oldwndproc is picked in arr_scint_oldwndproc
				break
		if oldwndproc == 0:													# fatal error ! should not happen...
			print "\t" + s_hook_name + " Fatal error ! oldwndproc = 0"
			notepad.messageBox(s_hook_name + " Fatal error ! oldwndproc = 0", s_script_name)
			return 0

		if (msg != WM_LBUTTONDBLCLK and msg != WM_RBUTTONDOWN):				# if NOT mouse hooked messages : abort
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP
		if console.editor.getProperty(s_editorprop_active) != s_true:		# if hook de-activated : abort
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		b_shift_down	= ((GetAsyncKeyState(I_VK_SHIFT)	& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		b_ctrl_down		= ((GetAsyncKeyState(I_VK_CONTROL)	& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		b_alt_down		= ((GetAsyncKeyState(I_VK_ALT)		& KSTATE_ISDOWN) == KSTATE_ISDOWN)

		if (msg == WM_LBUTTONDBLCLK and b_shift_down and not(b_ctrl_down) and not(b_alt_down)):
			self.ExtendSelToSpaceLikeChars()								# extend selection from the clicked point to the space-like chars
		elif (msg == WM_RBUTTONDOWN and not(b_shift_down) and not(b_ctrl_down) and not(b_alt_down)):
			dummy = 0														# do nothing
		else:
			return CallWindowProc(oldwndproc, hWnd, msg, wParam, lParam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		#res = "DEBUG " + s_hook_name
		#res = res + " Message = " + hex(msg) + " to hWnd = " + hex(hWnd)
		#res = res + " Forwarded To oldwndproc = " + str(oldwndproc)
		#print res + " At " + str(datetime.now())
		return CallWindowProc(oldwndproc, hWnd, 0, 0, 0)					# nullify the mouse hooked messages

	def ExtendSelToSpaceLikeChars(self):
		# space-like chars are space/tab/carriage return/line feed/form feed... [\t\n\x0B\f\r\x20\x85\xA0\x{2028}\x{2029}]
		editor.searchAnchor()
		i_start = editor.searchPrev(FINDOPTION.REGEXP, "\s")
		i_start = i_start + 1
		if i_start < 0:
			i_start = 0
		i_end = editor.searchNext(FINDOPTION.REGEXP, "\s")
		if i_end < 0:
			i_end = editor.getTextLength()
		editor.setSel(i_start, i_end)

print "[" + s_script_name + " starts]"
if console.editor.getProperty(s_editorprop_regdone) != s_true:
	console.editor.setProperty(s_editorprop_regdone, s_true)
	console.editor.setProperty(s_editorprop_active, s_true)
	o_scint_mouse_click_hook = C_Scint_Mouse_Click_Hook()	# create an instance of hook class
	o_scint_mouse_click_hook.RegHook()						# set up the mouse hook
	print "\t" + s_hook_name + " registered and ACTIVATED (re-run script to toggle the hook)"
else:
	if console.editor.getProperty(s_editorprop_active) != s_true:
		console.editor.setProperty(s_editorprop_active, s_true)
		print "\t" + s_hook_name + " RE-ACTIVATED (re-run script to toggle the hook)"
		notepad.messageBox(s_hook_name + " RE-ACTIVATED\n(re-run script to toggle the hook)", s_script_name)
	else:
		console.editor.setProperty(s_editorprop_active, "")
		print "\t" + s_hook_name + " de-activated (re-run script to toggle the hook)"
		notepad.messageBox(s_hook_name + " de-activated\n(re-run script to toggle the hook)", s_script_name)

[frying-pan]

This post is deleted!

[frying-pan]

Code update, probably the last for this script, since I have all the keyboard + mouse shortcuts I need.

• corrected one bug :
  (in case of a Scintilla window hook failure, the list of hooked WndProcs was incorrectly shortened and enumerated)
• cleaned the code
• added more keyboard + mouse shortcuts :
  • SHIFT + double-left-click : select from clicked point the whole variable name : alphanumeric with _ and . (dot)
  • CTRL + SHIFT + double-left-click : select from clicked point the whole bracket content : () [] {}, from left in case of mismatch
  • ALT + SHIFT + double-left-click : select from clicked point the whole quote content : “” ‘’, from left in case of mismatch
  • ALT + right-click : select from clicked point until space/space-like characters are met : space/tab/cr/lf/formfeed/vtab etc…
  • right-click : prevent right-click from moving the caret and losing current text selection
• added options to disable each shortcut separately (these options values must be edited in the script file)

note : my code rendering would be better if I could set up the real tabs to appear as 4 chars wide on this forum
(I prefer to have 4 chars wide tabs in Notepad++ but this forum render them as 8 chars wide)

note: since the code is too long to be loaded in one post, it will posted in two chunks.

Code chunk 1/2:

# PythonScript which hooks mouse clicks (WndProc HOOK on Scintilla windows)
# Tested on Notepad++ 64 bits (NOT tested on 32 Bits but could be compatible) /!\ this file uses TABS for indent /!\
	# SHIFT + double-left-click			: select from clicked point the whole variable name : alphanumeric with _ and . (dot)
	# CTRL + SHIFT + double-left-click	: select from clicked point the whole bracket content : () [] {}, from left in case of mismatch
	# ALT + SHIFT + double-left-click	: select from clicked point the whole quote content : "" '', from left in case of mismatch
	# ALT + right-click					: select from clicked point until space/space-like characters are met : space/tab/cr/lf/formfeed/vtab etc...
	# right-click						: prevent right-click from moving the caret and losing current text selection
# re-run the script to de-activate/re-activate the whole hook (re-running the script will also apply new *options values*)
# change the *options values* (just below) to choose which mouse hooks will be active

# *options values* : set value to INTEGER 1 to have the feature enabled (any OTHER INTEGER value will DISABLE it)
i_feature_shift_double_left_click			= 1
i_feature_control_shift_double_left_click	= 1
i_feature_alt_shift_double_left_click		= 1
i_feature_alt_right_click					= 1
i_feature_right_click						= 1
i_message_box_warnings						= 1	# if disabled, no message box will pop on registering hook error,
												# or when toggling the hook (console messages will still occur)
# end of *options values*

from Npp import *

import platform
import ctypes
from ctypes import wintypes
import datetime
from datetime import datetime

s_script_name	= "Perso_ScintWndProc_Hook"
s_hook_name		= "Scint_Mouse_Click_Hook"

s_editorprop_regdone		= "SCINTWNDPROC_HOOK_DONE"
s_editorprop_active			= "SCINTWNDPROC_HOOK_ACTIVE"
s_editorprop_sdlc_active	= "SCINTWNDPROC_SDLC_ACTIVE"
s_editorprop_csdlc_active	= "SCINTWNDPROC_CSDLC_ACTIVE"
s_editorprop_asdlc_active	= "SCINTWNDPROC_ASDLC_ACTIVE"
s_editorprop_arc_active		= "SCINTWNDPROC_ARC_ACTIVE"
s_editorprop_rc_active		= "SCINTWNDPROC_RC_ACTIVE"
s_true						= "TRUE"

s_reruntogglehook	= "Re-run the script to toggle the whole hook"
s_willapplynewopt	= "This will also apply new *options values* saved in the script file"
s_feature_sdlc_off	= "* Feature SHIFT + double-left-click is DISABLED by script option"
s_feature_csdlc_off	= "* Feature CTRL + SHIFT + double-left-click is DISABLED by script option"
s_feature_asdlc_off	= "* Feature ALT + SHIFT + double-left-click is DISABLED by script option"
s_feature_arc_off	= "* Feature ALT + right-click is DISABLED by script option"
s_feature_rc_off	= "* Feature right-click is DISABLED by script option"

GWL_WNDPROC = -4				# used to set a new address for the windows procedure
I_VK_SHIFT		= 0x10			# SHIFT virtual key code
I_VK_CONTROL	= 0x11			# CONTROL virtual key code
I_VK_ALT		= 0x12			# ALT virtual key code
KSTATE_ISDOWN = 0x8000			# key pressed
WM_LBUTTONDBLCLK	= 0x0203	# mouse double-left-click window message
WM_RBUTTONDOWN		= 0x0204	# mouse right-click down window message
WM_RBUTTONUP		= 0x0205	# mouse right-click up window message

LRESULT = wintypes.LPARAM
WndProcType = ctypes.WINFUNCTYPE(LRESULT, wintypes.HWND, wintypes.UINT, wintypes.WPARAM, wintypes.LPARAM)

# window message hook functions
CallWindowProc = ctypes.windll.user32.CallWindowProcW
CallWindowProc.restype = LRESULT
CallWindowProc.argtypes = [WndProcType, wintypes.HWND, wintypes.UINT, wintypes.WPARAM, wintypes.LPARAM]

x86 = platform.architecture()[0] == "32bit"
if x86:
	SetWindowLong = ctypes.windll.user32.SetWindowLongW
else:
	SetWindowLong = ctypes.windll.user32.SetWindowLongPtrW
SetWindowLong.restype = WndProcType
SetWindowLong.argtypes = [wintypes.HWND, wintypes.INT, WndProcType]
# end of window message hook functions

EnumWindowsProc				= ctypes.WINFUNCTYPE(wintypes.BOOL, wintypes.HWND, wintypes.LPARAM)
EnumWindows					= ctypes.windll.user32.EnumWindows
EnumChildWindows			= ctypes.windll.user32.EnumChildWindows
GetAsyncKeyState			= ctypes.windll.user32.GetAsyncKeyState
RealGetWindowClass			= ctypes.windll.user32.RealGetWindowClassW
GetWindowThreadProcessId	= ctypes.windll.user32.GetWindowThreadProcessId
GetCurrentProcessId			= ctypes.windll.kernel32.GetCurrentProcessId
SetLastError				= ctypes.windll.kernel32.SetLastError
GetLastError				= ctypes.windll.kernel32.GetLastError

class C_Scint_Mouse_Click_Hook():
	# class constructor
	def __init__(self):
		self.arr_scint_hwnd = []
		self.arr_scint_oldwndproc = []

	# function to register the hook on all found Scintilla windows
	def RegHook(self):
		def Enum_Window_Hwnd(hwnd, lparam):
			arr_enum_window_hwnd.append(hwnd)
			return True

		s_npp_class		= u"Notepad++"
		s_scint_class	= u"Scintilla"

		i_cur_pid = GetCurrentProcessId()
		npp_win_hwnd = None

		arr_enum_window_hwnd = []
		EnumWindows(EnumWindowsProc(Enum_Window_Hwnd), 0)
		# get all class="Notepad++" top_level NPP windows handle
		buff = ctypes.create_unicode_buffer(len(s_npp_class) + 1 + 1)
		for win_hwnd in arr_enum_window_hwnd:
			RealGetWindowClass(win_hwnd, buff, len(s_npp_class) + 1 + 1)
			if buff.value == s_npp_class:
				# check if each NPP window handle is owned by current process, stop at the first found
				ci_win_pid = wintypes.DWORD(0)
				GetWindowThreadProcessId(win_hwnd, ctypes.pointer(ci_win_pid))
				if i_cur_pid == ci_win_pid.value:
					npp_win_hwnd = win_hwnd
					break
		if npp_win_hwnd is None:
			print "\t" + s_npp_class + " window NOT found ! NO hook !"
			return False
		print "\t" + s_npp_class + " Handle = " + hex(npp_win_hwnd)

		del arr_enum_window_hwnd[:]
		EnumChildWindows(npp_win_hwnd, EnumWindowsProc(Enum_Window_Hwnd), 0)
		# get all class="Scintilla" windows handle, childs of NPP window, in arr_scint_hwnd
		# (at least all existing Scintilla windows at that time, should include primary and secondary views)
		buff = ctypes.create_unicode_buffer(len(s_scint_class) + 1 + 1)
		for win_hwnd in arr_enum_window_hwnd:
			RealGetWindowClass(win_hwnd, buff, len(s_scint_class) + 1 + 1)
			if buff.value == s_scint_class:
				self.arr_scint_hwnd.append(win_hwnd)

		# get the address of our own WndProc
		self.newWndProc = WndProcType(self.MyWndProc)

		# register the hook for each window present in arr_scint_hwnd
		s_list = "\t" + "Found " + str(len(self.arr_scint_hwnd)) + " " + s_scint_class + " Handle / WindowProc"
		i_index = 0
		while i_index < len(self.arr_scint_hwnd):
			win_hwnd = self.arr_scint_hwnd[i_index]
			# register hook and store oldwndproc addresses in arr_scint_oldwndproc
			SetLastError(0)
			oldwndproc = SetWindowLong(win_hwnd, GWL_WNDPROC, self.newWndProc)
			i_apierr = GetLastError()
			if i_apierr == 0:
				self.arr_scint_oldwndproc.append(oldwndproc)
				s_list = s_list + "\n" + "\t\t" + hex(win_hwnd) + " / " + str(oldwndproc)
				i_index = i_index + 1
			else:
				del self.arr_scint_hwnd[i_index]
				s_list = s_list + "\n" + "\t\t" + hex(win_hwnd) + " / " + "NO WindowProc ! NOT hooked !"
		print s_list
		if len(self.arr_scint_hwnd) == 0:
			print "\t" + s_scint_class + " window(s) or WindowProc(s) NOT found ! NO hook !"
			return False
		return True

	def MyWndProc(self, hwnd, msg, wparam, lparam):							# our own WndProc function receives windows messages
		oldwndproc = None
		for i in range(0, len(self.arr_scint_hwnd)):
			if self.arr_scint_hwnd[i] == hwnd:								# target hwnd found at index i in arr_scint_hwnd
				oldwndproc = self.arr_scint_oldwndproc[i]					# corresponding oldwndproc is picked in arr_scint_oldwndproc
				break
		if oldwndproc is None:												# fatal error ! should not happen...
			print "\t" + s_hook_name + " Fatal error ! Hooked WndProc NOT found !"
			notepad.messageBox(s_hook_name + " Fatal error ! Hooked WndProc NOT found !", s_script_name, MESSAGEBOXFLAGS.ICONEXCLAMATION)
			return 0

		if (msg != WM_LBUTTONDBLCLK and msg != WM_RBUTTONDOWN and msg != WM_RBUTTONUP): # if NOT in mouse hooked messages : abort
			return CallWindowProc(oldwndproc, hwnd, msg, wparam, lparam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP
		if console.editor.getProperty(s_editorprop_active) != s_true:		# if hook de-activated : abort
			return CallWindowProc(oldwndproc, hwnd, msg, wparam, lparam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		b_shift_down	= ((GetAsyncKeyState(I_VK_SHIFT)	& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		b_ctrl_down		= ((GetAsyncKeyState(I_VK_CONTROL)	& KSTATE_ISDOWN) == KSTATE_ISDOWN)
		b_alt_down		= ((GetAsyncKeyState(I_VK_ALT)		& KSTATE_ISDOWN) == KSTATE_ISDOWN)

		if (console.editor.getProperty(s_editorprop_sdlc_active) == "1" and \
				msg == WM_LBUTTONDBLCLK and b_shift_down and not(b_ctrl_down) and not(b_alt_down)):
			self.ExtendSel_AlphaNumUnderscoreDot()							# select from clicked point the whole variable name
		if (console.editor.getProperty(s_editorprop_csdlc_active) == "1" and \
				msg == WM_LBUTTONDBLCLK and b_shift_down and b_ctrl_down and not(b_alt_down)):
			self.ExtendSel_BracketContent()									# select from clicked point the whole bracket content
		if (console.editor.getProperty(s_editorprop_asdlc_active) == "1" and \
				msg == WM_LBUTTONDBLCLK and b_shift_down and not(b_ctrl_down) and b_alt_down):
			self.ExtendSel_Quotes()											# select from clicked point the whole quote content
		elif (console.editor.getProperty(s_editorprop_arc_active) == "1" and \
				msg == WM_RBUTTONUP and not(b_shift_down) and not(b_ctrl_down) and b_alt_down):
			self.ExtendSel_SpaceSpaceLike()
		elif (console.editor.getProperty(s_editorprop_rc_active) == "1" and \
				msg == WM_RBUTTONDOWN and not(b_shift_down) and not(b_ctrl_down) and not(b_alt_down)):
			dummy = 0														# do nothing
		else:
			return CallWindowProc(oldwndproc, hwnd, msg, wparam, lparam)	# -> IMPORTANT pass other msg to NPP, otherwise will block NPP

		#res = "DEBUG " + s_hook_name
		#res = res + " Message = " + hex(msg) + " to hwnd = " + hex(hwnd)
		#res = res + " Forwarded To oldwndproc = " + str(oldwndproc)
		#print res + " At " + str(datetime.now())
		return CallWindowProc(oldwndproc, hwnd, 0, 0, 0)					# nullify the mouse hooked messages

[frying-pan]

Code chunk 2/2:

	def FindBorderBiDir(self, i_start, s_pattern):
		i_text_len = editor.getTextLength()
		t_search = editor.findText(FINDOPTION.REGEXP, i_start, 0, s_pattern)
		if t_search is None:
			i_left = -1
		else:
			i_left = t_search[0]
		t_search = editor.findText(FINDOPTION.REGEXP, i_start, i_text_len, s_pattern)
		if t_search is None:
			i_right = i_text_len
		else:
			i_right = t_search[0]
		return (i_left, i_right)

	def ExtendSel_SpaceSpaceLike(self):
		s_pattern = "\s"

		i_caret_pos = editor.getCurrentPos()
		i_start	= editor.getSelectionStart()
		i_end	= editor.getSelectionEnd()

		t_border = self.FindBorderBiDir(i_caret_pos, s_pattern)
		i_left	= t_border[0] + 1
		i_right	= t_border[1]
		if i_left < i_right:
			editor.setSel(i_left, i_right)
		else:
			editor.setSel(i_start, i_end)

	def ExtendSel_AlphaNumUnderscoreDot(self):
		s_pattern = "[^\w_.]"

		i_caret_pos = editor.getCurrentPos()
		i_start	= editor.getSelectionStart()
		i_end	= editor.getSelectionEnd()

		t_border = self.FindBorderBiDir(i_caret_pos, s_pattern)
		i_left	= t_border[0] + 1
		i_right	= t_border[1]
		if i_left < i_right:
			editor.setSel(i_left, i_right)
		else:
			editor.setSel(i_start, i_end)

	def ExtendSel_Quotes(self):
		i_text_len = editor.getTextLength()
		i_caret_pos = editor.getCurrentPos()
		i_start	= editor.getSelectionStart()
		i_end	= editor.getSelectionEnd()

		t_search_prev_single = editor.findText(0, i_caret_pos, 0, "'")
		t_search_next_single = editor.findText(0, i_caret_pos, i_text_len, "'")
		t_search_prev_double = editor.findText(0, i_caret_pos, 0, chr(34))
		t_search_next_double = editor.findText(0, i_caret_pos, i_text_len, chr(34))

		i_left	= None
		i_right	= None
		if ((t_search_prev_single is None) or (t_search_next_single is None)):
			if (not(t_search_prev_double is None) and not(t_search_next_double is None)):
				i_left	= t_search_prev_double[0] + 1
				i_right	= t_search_next_double[0]
		elif ((t_search_prev_double is None) or (t_search_next_double is None)):
			if (not(t_search_prev_single is None) and not(t_search_next_single is None)):
				i_left	= t_search_prev_single[0] + 1
				i_right	= t_search_next_single[0]
		elif t_search_prev_single[0] < t_search_prev_double[0]:
				i_left	= t_search_prev_double[0] + 1
				i_right	= t_search_next_double[0]
		elif t_search_prev_double[0] < t_search_prev_single[0]:
				i_left	= t_search_prev_single[0] + 1
				i_right	= t_search_next_single[0]
		if (not(i_left is None) and not(i_right is None)):
			editor.setSel(i_left, i_right)
		else:
			editor.setSel(i_start, i_end)

	def ExtendSel_BracketContent(self):
		def SearchOrphan(i_start, i_end, s_pattern_brackets):
			if i_start == i_end:
				return None

			if i_start < i_end: b_forward = True
			else: b_forward = False

			i_par = 0; i_sqr = 0; i_cur = 0
			i_pos = i_start
			while True:
				t_search = editor.findText(FINDOPTION.REGEXP, i_pos, i_end, s_pattern_brackets)
				if t_search is None:
					return None

				i_pos = t_search[0]
				s_char = editor.getTextRange(i_pos, i_pos + 1)
				if		s_char == "(": i_par += 1
				elif	s_char == ")": i_par -= 1
				elif	s_char == "[": i_sqr += 1
				elif	s_char == "]": i_sqr -= 1
				elif	s_char == "{": i_cur += 1
				elif	s_char == "}": i_cur -= 1

				if b_forward:
					if (i_par < 0 or i_sqr < 0 or i_cur < 0): break
				else:
					if (i_par > 0 or i_sqr > 0 or i_cur > 0): break
				if b_forward: i_pos = i_pos + 1
			return (i_pos, s_char)

		i_text_len = editor.getTextLength()
		i_caret_pos = editor.getCurrentPos()
		i_start	= editor.getSelectionStart()
		i_end	= editor.getSelectionEnd()

		s_pattern_par = "\(\)"
		s_pattern_sqr = "\[\]"
		s_pattern_cur = "\{\}"
		s_pattern_brackets = "[" + s_pattern_par + s_pattern_sqr + s_pattern_cur + "]"

		i_left	= None
		i_right	= None
		while True:
			t_orphan_back = SearchOrphan(i_caret_pos, 0, s_pattern_brackets)
			if t_orphan_back is None: break

			s_char = t_orphan_back[1]
			if		s_char == "(": s_pattern = "[" + s_pattern_par + "]"
			elif	s_char == "[": s_pattern = "[" + s_pattern_sqr + "]"
			elif	s_char == "{": s_pattern = "[" + s_pattern_cur + "]"
			t_orphan_forward = SearchOrphan(i_caret_pos, i_text_len, s_pattern)
			if not(t_orphan_forward is None):
				i_left	= t_orphan_back[0] + 1
				i_right	= t_orphan_forward[0]
				break

			if		s_char == "(": s_pattern_brackets = s_pattern_brackets.replace(s_pattern_par, "")
			elif	s_char == "[": s_pattern_brackets = s_pattern_brackets.replace(s_pattern_sqr, "")
			elif	s_char == "{": s_pattern_brackets = s_pattern_brackets.replace(s_pattern_cur, "")
			if s_pattern_brackets == "[]": break
		if (not(i_left is None) and not(i_right is None)):
			editor.setSel(i_left, i_right)
		else:
			editor.setSel(i_start, i_end)
	# end of class

s_opt_info = ""
if i_feature_shift_double_left_click			!= 1: s_opt_info = s_opt_info + "\t" + s_feature_sdlc_off + "\n"
if i_feature_control_shift_double_left_click	!= 1: s_opt_info = s_opt_info + "\t" + s_feature_csdlc_off + "\n"
if i_feature_alt_shift_double_left_click		!= 1: s_opt_info = s_opt_info + "\t" + s_feature_asdlc_off + "\n"
if i_feature_alt_right_click					!= 1: s_opt_info = s_opt_info + "\t" + s_feature_arc_off + "\n"
if i_feature_right_click						!= 1: s_opt_info = s_opt_info + "\t" + s_feature_rc_off + "\n"
if not(s_opt_info == ""): s_opt_info = s_opt_info[:-1]
console.editor.setProperty(s_editorprop_sdlc_active,	str(i_feature_shift_double_left_click))
console.editor.setProperty(s_editorprop_csdlc_active,	str(i_feature_control_shift_double_left_click))
console.editor.setProperty(s_editorprop_asdlc_active,	str(i_feature_alt_shift_double_left_click))
console.editor.setProperty(s_editorprop_arc_active,		str(i_feature_alt_right_click))
console.editor.setProperty(s_editorprop_rc_active,		str(i_feature_right_click))

print "[" + s_script_name + " starts]"
if console.editor.getProperty(s_editorprop_regdone) != s_true:
	console.editor.setProperty(s_editorprop_active, s_true)
	o_scint_mouse_click_hook = C_Scint_Mouse_Click_Hook()	# create an instance of the hook class
	b_reg = o_scint_mouse_click_hook.RegHook()				# register the hook on all found Scintilla windows
	if b_reg:
		console.editor.setProperty(s_editorprop_regdone, s_true)
		print "\t" + s_hook_name + " registered and activated (" + s_reruntogglehook + ")"
		if not(s_opt_info == ""): print s_opt_info
	else:
		if not(s_opt_info == ""): print s_opt_info
		print "\t" + s_hook_name + " registering failed"
		if i_message_box_warnings == 1:
			notepad.messageBox(s_hook_name + " registering failed", s_script_name, MESSAGEBOXFLAGS.ICONSTOP)
else:
	if console.editor.getProperty(s_editorprop_active) != s_true:
		console.editor.setProperty(s_editorprop_active, s_true)
		print "\t" + s_hook_name + " re-activated (" + s_reruntogglehook + ")"
		if not(s_opt_info == ""): print s_opt_info
		if i_message_box_warnings == 1:
			notepad.messageBox( \
				s_hook_name + " re-activated\n\n" + s_reruntogglehook + "\n" + s_willapplynewopt + "\n" + s_opt_info, \
				s_script_name, MESSAGEBOXFLAGS.ICONINFORMATION)
	else:
		console.editor.setProperty(s_editorprop_active, "")
		print "\t" + s_hook_name + " DE-ACTIVATED (" + s_reruntogglehook + ")"
		if not(s_opt_info == ""): print s_opt_info
		if i_message_box_warnings == 1:
			notepad.messageBox( \
				s_hook_name + " DE-ACTIVATED\n\n" + s_reruntogglehook + "\n" + s_willapplynewopt + "\n" + s_opt_info, \
				s_script_name, MESSAGEBOXFLAGS.ICONEXCLAMATION)

[frying-pan]

Hey ! the forum changed the line 313 of my uploaded code

line 313 was uploaded as :
(I must replace \ by BKL to have it displayed)
s_pattern_sqr = “BKL[BKL]”
but is displayed without the \ as :
s_pattern_sqr = “[]”

which breaks the ‘CTRL + SHIFT + double-left-click’ feature : select brackets content : () [] {}

having compared the whole uploaded code with my original code there should no other error
(I used a simple file compare utility to do that : ExamDiff)

So there is a bug in the text parser of the forum :
the preview is ok but the final post has lost the backslashes

[Michael Vincent]

@frying-pan
Wow, that’s quite a script. Maybe post to GitHub or a Gist and then link from here to that post?

Cheers.

[Alan Kilborn]

This post is deleted!

[frying-pan]

@Michael-Vincent

Uploaded on GitHub the last posted script in this thread, as version v1 (without the backslash error)

[https://github.com/frying-pan/NotepadPP-PythonScript-Mouse-Gesture/blob/master/Perso_ScintWndProc_Hook.v1.py](link url)

and made a version v2.0 : with some code cleaning and more object_oriented style

[https://github.com/frying-pan/NotepadPP-PythonScript-Mouse-Gesture/blob/master/Perso_ScintWndProc_Hook.v2.0.py](link url)