Unofficial strings for translations

batagy

Point #1 :
Oh, yes, thanks for correct me! It’s not “Highlight…”, but “Mark…” indeed!
I have taken the string from Robert here , but many faulty string appear there.

So the correct one is:
Under <Commands>
<Item id=“43054” name=“Mark…”/>

Point #2 :
OK, nice. :)

Point #3 :
The 6258 bla-bla is at the same place where the 6257 bla-bla, but only appear if you tick the checkbox “Allow on several lines”. :)

Point #4 :
Well, in past I have restarted always N++, but lately discovered that mostly it’s enough to go into Settings -> Preferences… -> General -> Localization, select the English, and immediately after select back the mother language, without N++ restart. It refreshes the language. Probably then because of copying nativeLang.xml also during it runs.

In some rare case however restart is still needed, if I remember correctly, for certain messages, but I’m not fully sure.

Regards

guy038

Hello Batagy,

Concerning point #3, I’m confused : I didn’t even think about checking the Allow on several lines option ! Really silly :-(, Thanks you for this info.

On point #4, I noticed that, if you did some modifications on your mother XML language file, it’s enough, as you said, to select the English, in Settings- Preferences - General - Localization, and, immediately, choose again, your mother language, to notice the effect of your changes.

However, if you want to go back, definitively, to English language, a restart of N++ is necessary. If not, seemingly, your last modifications, in your mother language, are still present, after switching to English !

Best regards,

guy038

BTW, as you created the new topic Not translatable places in program, I deleted these lines, in my previous post, and added a link to this new topic.

Roberto Boriotti

@batagy

Please maintain first post updated with updated list of string missings.

What about “Trim Tailing and save” under Macro menu?

batagy

@Roberto-Boriotti
Good idea. I’ve updated the first post.

Regarding “Trim Trailing and save” in Macro, I think it’s name a Macro itself. So it cannot be and shouldn’t be translated.

Yaron

Hello,

v6.8:
Under <Scintillas title=“Editing”>
<Item id=“6215” name=“Enable smooth font”/>

Regards.

Roberto Boriotti

@batagy

Thanks for the updates in first post.
I propose to add in first post near date last update also the last Notepad++ version reference (now is 6.8).

I believe that we could add these missing strings (ex. with pull request to english.xml - what do you think)? to enable all translator ato update (if it need) the not English language.

Whats about the untranslated part of the installer (ex. module to install and window with program install option).
Is it need to open a separate thread for that?

batagy

@Yaron
Thanks for this below, it’s indeed a new and missing. I have added to the first post.

Under <Scintillas title=“Editing”>
<Item id=“6215” name=“Enable smooth font”/>

@Roberto-Boriotti
Added version info to first post.

Additionally I found that below needs to be uncommented, so that it will work:
Under <Cloud title=“Cloud”>
<Item id=“6261” name=“Please restart Notepad++ to take effect.”/>

Finally, I now created a Pull Request to include the 11 known unofficial to make official.

Yaron

Hi batagy,

My pleasure. Many thanks for your work.

Best regards.

Roberto Boriotti

@batagy
Thanks for your work and m,aster english language pull request.
I hope that Do Ho add as soon as and use the language file for next release.

@batagy
Could you check and help us also about in “Not translatable string” thread? Thanks.

Roberto Boriotti

@donho

Could you please update english.xml oull with the request by batagy?

I’m waiting that to update Italian language.

batagy

@Roberto-Boriotti
I suggest you , that it’s not worth bugging developers and translators so much often. It’s actually worse than you just wait. The Pull Request was opened and assigned to Don, so he is aware. He will update it when he can do. Thanks for understanding.

Roberto Boriotti

@batagy
The request about new strings is officialy made just few days but the relative discussion is pending from several months.

How many time is required to check and accept one requets of 11 strings (that the developer should know very well and should already included in teh language…) that are mandatory for the program and should have an high priority?
Who so many time to confirm that?
Why did they accept immediately the Hungarian pull request (that should have a lower priority than change to master english language and it means that have time to spent for the project…) and didn’t accept the english pull request?
It seems that the author don’t want change them…
But in this case they have to explain that…

Like the discussion about the installer that has two window untranslated.

Like as the macro and other things that are in the same state .

I believe that many important aspects were parked in the oblivion state…

batagy

It’s not allowed to edit posts after 180 seconds anymore. So I cannot edit the first post.
Please find update here.

Below 4 items were added to the master English.xml, for version 6.8.2 as part of PR #542, so these are not anymore unofficial:

Under <Commands>
<Item id=“43054” name=“Mark…”/>

Under <StylerDialog title=“Styler Dialog”>
<Item id=“1” name=“OK”/>
<Item id=“2” name=“Cancel”/>

Under <Scintillas title=“Editing”>
<Item id=“6215” name=“Enable smooth font”/>

Below 5 items are choosed not to be included in translations by Don (version 6.8.2, as part of PR #542):

Under <Delimiter title=“Delimiter”>
<Item id=“6257” name=“bla bla bla bla bla”/>
<Item id=“6258” name=“bla bla bla bla bla bla bla bla bla bla bla”/>
I guess this is not included in master file because it can be understood in other languages. :)

Under <Commands>
<Item id=“44012” name=“Hide Line Number Margin”/>
<Item id=“44013” name=“Hide Bookmark Margin”/>
<Item id=“44014” name=“Hide Folder Margin”/>
These 3 items are only appearing in menu if “Customize Toolbar” plugin is installed.
These lines are not supported by Don in the master English.xml. Quote from him:
“Plugin translations will never be in localization file - not only because of maintenance problem, but especially the id of plugin commands are assigned dynamically.”

The complete known real unofficial items are these 2 below, for version 6.8.2, modified on 2015.08.20:

Under <Cloud title=“Cloud”>
<Item id=“6261” name=“Please restart Notepad++ to take effect.”/>
This item just needs to be uncommented!

Under <ColumnEditor title=“Column Editor”>
<Item id=“2036” name=“Repeat :”/>

#759 is created for this latter 2.

Yaron

New in v6.8.7:

Under <DefaultDir title

guy038

Hi Batagy, Yaron, Roberto and All,

2 New items, in version v6.8.8 :

In the <Scintillas> node :

<Item id="6235" name="No edge"/>

In the <Commands> node :

<Item id="47012" name="Debug Info"/>

Roberto, I agree to what you said in your last post : we should get little feedback from Don, and/or from the contributors, about these translation matters !

It doesn’t seem so difficult to add these additional items to the English.xml file, only, under the localization folder, even if they are absent, in the others .xml language files :-)

Cheers,

guy038

Yaron

Thank you guy038.

Happy New Year.

batagy

2016.02.14
Please find update here.

Below 1 items were added to the master English.xml, as part of PR #759, so these are not anymore unofficial:

Under <ColumnEditor title=“Column Editor”>
<Item id=“2036” name=“Repeat :”/>

Below 6 items are choosed not to be included in translations by Don.
Still you can include them in your translations for your responsibility:

Under <Delimiter title=“Delimiter”>
<Item id=“6257” name=“bla bla bla bla bla”/>
<Item id=“6258” name=“bla bla bla bla bla bla bla bla bla bla bla”/>
Denied by Don in PR #542.
I guess this is not included in master file because it can be understood in other languages. :)

These 3 items are only appearing in menu if “Customize Toolbar” plugin is installed.
For Customize Toolbar 4.0 (this version is installed by default from Plugin manager!):
Under <Commands>
<Item id=“44012” name=“Hide Line Number Margin”/>
<Item id=“44013” name=“Hide Bookmark Margin”/>
<Item id=“44014” name=“Hide Folder Margin”/>
For Customize Toolbar 4.1 the ID’s are changed! (4.1 can be installed manually):
Under <Commands>
<Item id=“44212” name=“Hide Line Number Margin”/>
<Item id=“44213” name=“Hide Bookmark Margin”/>
<Item id=“44214” name=“Hide Folder Margin”/>
Denied by Don in PR #542.
These lines are not supported by Don in the master English.xml. Quote from him:
“Plugin translations will never be in localization file - not only because of maintenance problem, but especially the id of plugin commands are assigned dynamically.”

Under <Cloud title=“Cloud”>
<Item id=“6261” name=“Please restart Notepad++ to take effect.”/>
Denied by Don in PR #759.
Quote from him:
“Item id=“6261” is used also for “Invalid path”, it’s currently hard coding so I prefer to keep it untranslatable.”
Otherwise, this item just needs to be uncommented.

The complete known real unofficial items are these 3 below, for version 6.8.8, modified on 2016.02.14:

Under <DefaultDir title=“Default Directory”>
<Item id=“6430” name=“Use new style save dialog (without file extension feature)”/>

Under <Scintillas title=“Editing”>
<Item id=“6235” name=“No edge”/>

Under <Commands>
<Item id=“47012” name=“Debug Info”/>

PR #1475 is created for this latter three!

rddim

From Notepad++ 6.9

Under <Commands>

<Item id="44085" name="Folder as Workspace"/>

but can’t find how to translate the title bar of the panel when this option is activated, also the right click menu in it. Also in Preferences -> MISC. -> Workspace file ext.: is untranslatable

rddim

Under <MISC title=“MISC.”>

for Preferences -> MISC. -> Workspace file ext.:

<Item id="6337" name="Workspace file ext.:"/>

rddim

For the next version

Under <Commands>

<Item id="41022" name="Open Folder as Workspace"/>