Multi selection and multi edit

PeterJones

but now the problem is how do I add the scripts by @bitagoras to the notepad ++?

…
Assign a keycombo (again; suggested ones are above the “scripts” above)

If saving and naming a script wasn’t obvious, then assigning a keycombo is going to be less intuitive. Just saying. ;-)

@michaelfernandez98,
Once you have one or more scripts named and saved as Alan described, then go to Plugins > NppExec > Advanced Options. In the lower left, use the Associated Script pulldown to select the script; click Add/Modify button to add it to the list of Menu Items in the upper left; note whether or not ☑ Place in the Macros Submenu is enabled (you will need this later). Repeat as necessary for all of the above scripts. When you hit OK to apply those changes, a popup will tell you that you should restart Notepad++: save any open files, then restart Notepad++.

After the restart, then either the Macros menu (if the checkbox was enabled) or the Plugins > NppExec submenu (if the checkbox was disabled) will list your new NppExec scripts.

To assign a keycombo to each, go to Macros > Modify Shortcut/Delete Macro (or, equivalently, Settings > Shortcut Mapper), and go to the Plugin Commands tab. Filter by NppExec and scroll down until you see the new script names. Click on the script you want a keycombo for, hit Modify, and pick the appropriate combination of Ctrl, Alt, Shift, and the selected key. Repeat the Modify procedure for all the scripts that you want a keycombo for.

Alan Kilborn

@PeterJones

Thanks for filling in those details Peter!
As I was walking thru the steps on my setup, I didn’t do that part, so I’d forgotten that it was maybe not the most obvious thing.

Is there a way to delete scripts that just isn’t obvious to me at the moment?
For example, during my experimentation I named my script “junk”.
Now I want to get rid of it, but don’t see a way to in the NppExec UI.
Or do I have to resort to hand-editing the config file for the plugin?

PeterJones

@Alan-Kilborn said in Multi selection and multi edit:

Now I want to get rid of it, but don’t see a way to in the NppExec UI.

No obvious way, that’s for sure.

The … > Advanced Options > Delete button removes it from the menu, but not from the saved scripts.

Oh, right, there it is. F6, select junk, counter-intuitively hit Save…, then click the Delete button.

michaelfernandez98

I could already install the plugin and assign the keycombo to it
thanks @PeterJones @Alan-Kilborn
They were very helpful

michaelfernandez98

sorry if my english is bad
I speak Spanish

Don Bhai

@bitagoras
@Claudia-Frank
@dinkumoil
i got the plugin and could multi select finally, thanks
but i tried to replace 6 words by another corresponding 6 words
it worked in vscode that the first selected word replaced by the first word in clipboard and the second word replaced by second word and so on
but her in notepad++ every word replaced by the 6 words that in clipboard that makes me crazy
please, any one can help? any idea ?any script ?

Alan Kilborn

@Don-Bhai

I’d help with a PythonScript, but maybe you want an NppExec script?
Can’t tell from the above…

guy038

Hello, @don-bhai, @alan-kilborn and All,

I may misunderstand what you want but are you looking for this kind of manipulations, below, which seems to work nicely ?

I assume that the BetterMultiSelection plugin is installed, with its last 1.4 version ( IMPORTANT )

I personally tested with N++ portable v7.9.2 (32 bits )

So :

Paste the text, below, beginning with a blank line, in a new tab


Little 123 test
Little 456 test
Little 789 test
Little 012 test
Little 345 test
Little 678 test

678
345
012
789
456
123

Move the caret at beginning of line 9
Hold down the Alt and Shift keys and hit 5 times on the Down arrow key
Hit the Shift + End shortcut, once
Hit the Ctrl + C shortcut
Hit, 7 times, on the Up arrow key
Hit, 4 times, on the Right arrow key
Hold down the Shift key and hit 3 times on the Right arrow key
Hit the Ctrl + V shortcut
Hit the Esc key to cancel the multi-selection !

As you can see, in the picture, below, each number, from line 27 to 32, have been pasted, accordingly, in lines 20 to 25 ;-))

Best Regards

guy038

Alan Kilborn

@guy038

I presume OP has this, where the inverted text is the product of “multi-select”:

and then has this in the clipboard:

Peter
Guy
Claudia
Scott
Alan
Terry
Michael

And wants to end up with this text after replacement:

Note that I styled the text in the cyan color myself, just so the replacements could be easier to see.

Of course I could be totally wrong about what the OP has and wants. :-)

Alan Kilborn

Oops, it appears I’ve turned Guy into a philandering filmmaker, Scott into an infidel, and Michael into an encourager of adultery. Sorry, all! :-)

Don Bhai

@Alan-Kilborn
i can install paython plugin if this is not available in NPPEXec script

astrosofista

@Don-Bhai said in Multi selection and multi edit:

but her in notepad++ every word replaced by the 6 words that in clipboard that makes me crazy

As I understand you comment, I think you missed an important condition to get what you want - in order to distribute replacements over a multiselection, you must copy the replacement strings as a rectangular selection, not a normal one.

Hope this helps.

Don Bhai

@guy038 you are amazing, thank you very much
i was selecting the 6 word by ctrl+A
thats why it replace every word by the 6 words i have selected and copied in clipboard
thanks @Alan-Kilborn , @guy038 , @astrosofista , and to every one tried to help

Don Bhai

@astrosofista you are right, i selected them as normal one that’s my fault

bitagoras

I released a Notepad++ bundle where the multi selection is already installed, so you can simply test it:
https://github.com/bitagoras/PyPadPlusPlus/releases
It’s actually a portable version that includes a Python environment. But you don’t need this for mult selection.

Below you can see how this looks like. The only non-standard edit command I used here is <Strg> + <D>.

alt text

Alan Kilborn

@bitagoras said in Multi selection and multi edit:

The only non-standard edit command I used here is <Strg> + <D>.

<Strg> + <D> ??
What does that mean?

bitagoras

@Alan-Kilborn
Sorry, I use a German keyboard. I wanted to write <Ctrl> + <D> ;-)

donho

FYI: This feature is implemented in Notepad++ core and it’ll be available in the next release.
You may want to check the PR to see if it meets your need:
https://github.com/notepad-plus-plus/notepad-plus-plus/pull/14313