Paste every "say 37th line" apx..

[Carolina Number 1]

ok…so just click on Replace All…there is no tick for exclusively, right lol

[Alan Kilborn]

@Carolina-Number-1 said in Paste every "say 37th line" apx..:

total newbie here

:-) Welcome.

If you have questions about what advice we give, certainly ask. :-)

[Carolina Number 1]

ok so search for isuserselectable = 0 ; flag off for non selectable planes…so far so good lol

[Carolina Number 1]

@Carolina-Number-1

not sure about what of this goes in the search line?
After searching for the line isuserselectable = 0 ; flag off for non selectable planes, respecting the case (?-i) and its line-ending characters \R, the \K feature resets the search and simply matches the zero-length location, right after this line

[Carolina Number 1]

@Alan-Kilborn

not sure about what of this goes in the search line?
After searching for the line isuserselectable = 0 ; flag off for non selectable planes, respecting the case (?-i) and its line-ending characters \R, the \K feature resets the search and simply matches the zero-length location, right after this line

once i get the hang of this…then i have maybe 100 more airplanes …lol

[Alan Kilborn]

@Carolina-Number-1

So, when @guy038 said:

SEARCH (?-i)isuserselectable = 0 ; flag off for non selectable planes\R\K

REPLACE sound = “sound” ; sound folder\r\n ( OR sound = “sound” ; sound folder\n if UNIX files )

He meant for “SEARCH” that you would put this in the box labeled Find what:

And correspondingly, “REPLACE” means look for the Replace with box.

Does that help?

[Carolina Number 1]

@Alan-Kilborn

yeah…I think I lost my “isuserselectable = 0 ; flag off for non selectable planes” because it replaced it with the sound stuff…lol but it added sound i think 736 times…so rather than replace that line…insert the sound line below it…this was on a trial cfg not the real one yet till i get this down.

[Alan Kilborn]

@Carolina-Number-1

But, because you’re an admitted noob, why not do a simpler-to-understand Extended mode replacement, like this:

Notice:

• the Search mode has been set to Extended – this allows you to do fancy things (over and above what a Normal search allows) like specify multiple lines in your data (here you are replacing one-line with two (the original plus a new one).

• the \r\n in the Replace with data is what creates a second line in your data; it is the “dividing point” between two lines

Is this easier to see/understand?

[guy038]

Hi, @carolina-number-1

BR

guy038

[Carolina Number 1]

@guy038

Hey Thanks All!!!

You are great!!!

I am 70 and a tad slow but getting it, i think lol

[Carolina Number 1]

@guy038
t seems now its just stopped replacing…say no occurences were replaced …etc

Thank you,
Bob M.

[Carolina Number 1]

If I need to change this: isuserselectable = 0 ; flag off for non selectable planes to this:

isUserSelectable = 0 ; (on the end of search line after 0 ; \R\K

and still replace with:

sound = “sound” ; sound folder (sound = “sound” ; sound folder\r\n)

[guy038]

@carolina-number-1,

Your last post isn’t quite clear but I guess you would like to add the line sound = "sound" ; sound folder right after each line beginning with isuserselectable = 0, whatever the contents of a possible comment area, coming next the colon character

If so, change the search regex, only, as :

SEARCH (?-si)isuserselectable = 0.*\R\K

• The (?-s) part means that any dot meta-character matches a single standard character

• The .* syntax, before the \R , represents the area, possibly empty, of standard character(s), after the string = 0 and before the EOL chars

I advice you to get documentation on the regex world, in this FAQ

Best regards,

guy038

[Carolina Number 1]

@guy038

Hey Thank you…You are awesome…thanks for all your help!! Defeinitely check out the faq…

BobM.

[Carolina Number 1]

@guy038

Just curious and maybe it can’t be done… but lets say I have 100 Fltsims and I want to be apostrophe’s at the beginning and end of the title line only…can that be done…here’s a sample:

[fltsim.1]
title=“JFAI_737_300_AirChina”
sim=TrafficGlobal
model=
panel=x
sound=
texture=AirChina
atc_id=B737
atc_flight_number=
atc_airline=AIR CHINA
atc_parking_codes=CCA
atc_parking_types=GATE,RAMP
ui_manufacturer=Boeing
ui_type=B733
ui_variation=Air China
description=AI
ui_typerole=Traffic Global AI
ui_createdby=Just Flight

[fltsim.2]
title=“JFAI_737_300_AllNippon”
sim=TrafficGlobal
model=
panel=x
sound=
texture=AllNippon
atc_id=B737
atc_flight_number=
atc_airline=ALL NIPPON
atc_parking_codes=ANA
atc_parking_types=GATE,RAMP
ui_manufacturer=Boeing
ui_type=B733
ui_variation=All Nippon
description=AI
ui_typerole=Traffic Global AI
ui_createdby=Just Flight

So in other words…I would open the document in Notepad++ and want to put the apostrophe at the beginning and end of just the “Title line” for each fltsim section…1,2,3, etc… Might have to do a couple thousand of these…lol

i learned so much yesterday on the little I did that now I am dangerous!!!

BobM.

[Alan Kilborn]

@Carolina-Number-1 said in Paste every "say 37th line" apx..:

So, presuming you have:

title=JFAI_737_300_AirChina

and you want that to be changed into:

title="JFAI_737_300_AirChina"

and that is the only thing you have on the line…

Then you could do:

find: (?-s)^title=(.+)
repl: title="${1}"
mode: Regular expression

There are of course some other ways, but this is probably the simplest, and I don’t think it is really worth showing a total noob some of the other ways at this point, because the confusion factor would just skyrocket.

[Carolina Number 1]

@Alan-Kilborn

Hey Thanks!! Never been called a a total noob before… I am so honored…lol

Warmest Greets…Stay Safe!!

BobM.

[Carolina Number 1]

@Alan-Kilborn worked like a charm…zowie :)

BobM.

[guy038]

Hi, @carolina-number-1 and All,

I guess that you want to surround any text after the string title = with two double-quotes "

If so, this regex S/R is the right one :

SEARCH (?-si)^(title\x20*=\x20*+)(?!")(.+)

REPLACE \1"\2"

As usual :

• Tick the Wrap around option and select the Regular expression search mode

• Click, either, several times on the Replace button or once only on the Replace All button

Notes :

• The part (?-si)^(title\x20*=\x20*) selects the string title, with that exact case ( (?-i) ), at beginning of line ( ^ ), followed with the equal sign ( = ), possibly preceded and/or followed with space char(s) ( \x20* ) and stores all in group 1

• Remark that the \x20*+ regex range of space chars, after the equal sign, defines an atomic structure. This means that no backtracking will be done, by the regex engine, in that range of spaces. In other words, this means : "search for possible space chars, after the = sign, and verify, immediately that the next char is not a double-quote sign "

• As said above, the part (?!") is a negative look-ahead structure. which tests, if, at current position, a " symbol can be found. If not, the condition is considered as TRUE and the current match attempt is OK, so far

• Then, the part (.+) matches the remaining standard characters of current line and stores them as group 2

• The replacement part \1"\2" rewrites these two groups, with two doubles quotes surrounding the group 2

Remark that the (?!") regex part avoids to surround an area, already surrounded with double-quotes, which would give, for instance, ““some text””, in case you would click twice on the Replace All button

@carolina-number-1, do not bother about atomic quantifiers and look-around structures, for the moment !, You have plenty of basic regex expressions to learn before ;-))

Best Regards,

guy038

[Carolina Number 1]

@guy038 Thank you!!

BobM.