Help with JSON and Scintilla Lexer
-
@PeterJones said in Help with JSON and Scintilla Lexer:
though I had to click back in the editor pane to get the screen to refresh
As did I with NppExec, thanks for mentioning that.
Cheers.
-
@PeterJones said in Help with JSON and Scintilla Lexer:
The Scintilla interface has a way to set and get properties.
I got pretty excited about this:
::lex NPP_CONSOLE keep SET LOCAL AFTER = 0 IF "$(ARGC)"<="1" THEN SCI_SENDMSG SCI_PROPERTYNAMES 0 @"" ECHO $(MSG_LPARAM) ELSE IF "$(ARGC)"<="2" THEN SCI_SENDMSG SCI_DESCRIBEPROPERTY "$(ARGV[1])" @"" ECHO $(MSG_LPARAM) SCI_SENDMSG SCI_GETPROPERTYEXPANDED "$(ARGV[1])" @"" ECHO $(ARGV[1]) = $(MSG_LPARAM) ELSE IF "$(ARGC)"<="3" THEN SCI_SENDMSG SCI_SETPROPERTY "$(ARGV[1])" "$(ARGV[2])" ELSE GOTO USAGE ENDIF GOTO END :USAGE ECHO Usage: ECHO \$(ARGV[0]) = current lexer properties ECHO \$(ARGV[0]) [K] = get value of property K ECHO \$(ARGV[0]) [K] [V] = set property K to value V :ENDNow I’ve been running
\lexfrom NppExec console on all filetypes to see what magical properties Scintilla has that I can monkey with :-)Cheers.
-
but don’t be sad if it turns out that very few lexers
propagate their “properties” in this way. :-( -
propagate their “properties” in this way. :-(
Good timing. I just finished a script to explore this:
# encoding=utf-8 """ !!!REQUIRES PythonScript 1.5.4 to avoid getLanguageDesc() bug!!! """ from Npp import * console.show() console.clear() notepad.new() keep = notepad.getLangType() for t in [LANGTYPE.ADA, LANGTYPE.ASM, LANGTYPE.ASN1, LANGTYPE.ASP, LANGTYPE.AU3, LANGTYPE.AVS, LANGTYPE.BAANC, LANGTYPE.BASH, LANGTYPE.BATCH, LANGTYPE.BLITZBASIC, LANGTYPE.C, LANGTYPE.CAML, LANGTYPE.CMAKE, LANGTYPE.COBOL, LANGTYPE.COFFEESCRIPT, LANGTYPE.CPP, LANGTYPE.CS, LANGTYPE.CSOUND, LANGTYPE.CSS, LANGTYPE.D, LANGTYPE.DIFF, LANGTYPE.ERLANG, LANGTYPE.ESCRIPT, LANGTYPE.FLASH, LANGTYPE.FORTH, LANGTYPE.FORTRAN, LANGTYPE.FORTRAN_77, LANGTYPE.FREEBASIC, LANGTYPE.GUI4CLI, LANGTYPE.HASKELL, LANGTYPE.HTML, LANGTYPE.IHEX, LANGTYPE.INI, LANGTYPE.INNO, LANGTYPE.JAVA, LANGTYPE.JAVASCRIPT, LANGTYPE.JS, LANGTYPE.JSON, LANGTYPE.JSP, LANGTYPE.KIX, LANGTYPE.LATEX, LANGTYPE.LISP, LANGTYPE.LUA, LANGTYPE.MAKEFILE, LANGTYPE.MATLAB, LANGTYPE.MMIXAL, LANGTYPE.NIMROD, LANGTYPE.NNCRONTAB, LANGTYPE.NSIS, LANGTYPE.OBJC, LANGTYPE.OSCRIPT, LANGTYPE.PASCAL, LANGTYPE.PERL, LANGTYPE.PHP, LANGTYPE.POWERSHELL, LANGTYPE.PROPS, LANGTYPE.PS, LANGTYPE.PUREBASIC, LANGTYPE.PYTHON, LANGTYPE.R, LANGTYPE.RC, LANGTYPE.REBOL, LANGTYPE.REGISTRY, LANGTYPE.RUBY, LANGTYPE.RUST, LANGTYPE.SCHEME, LANGTYPE.SEARCHRESULT, LANGTYPE.SMALLTALK, LANGTYPE.SPICE, LANGTYPE.SQL, LANGTYPE.SREC, LANGTYPE.SWIFT, LANGTYPE.TCL, LANGTYPE.TEHEX, LANGTYPE.TEX, LANGTYPE.TXT, LANGTYPE.TXT2TAGS, LANGTYPE.USER, LANGTYPE.VB, LANGTYPE.VERILOG, LANGTYPE.VHDL, LANGTYPE.VISUALPROLOG, LANGTYPE.XML, LANGTYPE.YAML]: n = notepad.getLanguageName(t) d = notepad.getLanguageDesc(t) console.write("{!s:<35.35s} {!s:<35.35s} {!s:<35.35s}\n".format(t,n,d)) notepad.setLangType(t) for s in editor.propertyNames().split(): if editor.getPropertyInt(s,-65537) > -65537: v = str(editor.getPropertyInt(s,-65537)) else: v = '"' + editor.getProperty(s) + '"' console.write("\t{:<32.32}:{:01d}: {:<32.32} \"{}\"\n".format("'"+s+"'", editor.propertyType(s), v, editor.describeProperty(s))) notepad.setLangType(keep) notepad.close()—
Tangential: While I’ve got you here, @Ekopalypse , I manually useddir(LANGTYPE)to get that list, then I changed['ADA', ...]to[LANGTYPE.ADA, ...]. Is there an easier way to do that inside Python, rather than manually making the list of types?
—Anyway, back to the results: quite a few have properties, but not all:
... JAVASCRIPT JavaScript JavaScript file 'styling.within.preprocessor' :0: "" "For C++ code, determines whether all preprocessor code is styled in the preprocessor style (0, the default) or only from the initial # to the end of the command word(1)." 'lexer.cpp.allow.dollars' :0: "" "Set to 0 to disallow the '$' character in identifiers with the cpp lexer." 'lexer.cpp.track.preprocessor' :0: 0 "Set to 1 to interpret #if/#else/#endif to grey out code that is not active." 'lexer.cpp.update.preprocessor' :0: "" "Set to 1 to update preprocessor definitions when #define found." 'lexer.cpp.verbatim.strings.allo:0: "" "Set to 1 to allow verbatim strings to contain escape sequences." 'lexer.cpp.triplequoted.strings':0: "" "Set to 1 to enable highlighting of triple-quoted strings." 'lexer.cpp.hashquoted.strings' :0: "" "Set to 1 to enable highlighting of hash-quoted strings." 'lexer.cpp.backquoted.strings' :0: 1 "Set to 1 to enable highlighting of back-quoted raw strings ." 'lexer.cpp.escape.sequence' :0: "" "Set to 1 to enable highlighting of escape sequences in strings" 'fold' :0: 1 "" 'fold.cpp.syntax.based' :0: "" "Set this property to 0 to disable syntax based folding." 'fold.comment' :0: 1 "This option enables folding multi-line comments and explicit fold points when using the C++ lexer. Explicit fold points allows adding extra folding by placing a //{ comment at the start and a //} at the end of a section that should fold." 'fold.cpp.comment.multiline' :0: "" "Set this property to 0 to disable folding multi-line comments when fold.comment=1." 'fold.cpp.comment.explicit' :0: "" "Set this property to 0 to disable folding explicit fold points when fold.comment=1." 'fold.cpp.explicit.start' :2: "" "The string to use for explicit fold start points, replacing the standard //{." 'fold.cpp.explicit.end' :2: "" "The string to use for explicit fold end points, replacing the standard //}." 'fold.cpp.explicit.anywhere' :0: "" "Set this property to 1 to enable explicit fold points anywhere, not just in line comments." 'fold.cpp.preprocessor.at.else' :0: "" "This option enables folding on a preprocessor #else or #endif line of an #if statement." 'fold.preprocessor' :0: 1 "This option enables folding preprocessor directives when using the C++ lexer. Includes C#'s explicit #region and #endregion folding directives." 'fold.compact' :0: 0 "" 'fold.at.else' :0: "" "This option enables C++ folding on a "} else {" line of an if statement." JS JavaScript JavaScript file 'styling.within.preprocessor' :0: "" "For C++ code, determines whether all preprocessor code is styled in the preprocessor style (0, the default) or only from the initial # to the end of the command word(1)." 'lexer.cpp.allow.dollars' :0: "" "Set to 0 to disallow the '$' character in identifiers with the cpp lexer." 'lexer.cpp.track.preprocessor' :0: 0 "Set to 1 to interpret #if/#else/#endif to grey out code that is not active." 'lexer.cpp.update.preprocessor' :0: "" "Set to 1 to update preprocessor definitions when #define found." 'lexer.cpp.verbatim.strings.allo:0: "" "Set to 1 to allow verbatim strings to contain escape sequences." 'lexer.cpp.triplequoted.strings':0: "" "Set to 1 to enable highlighting of triple-quoted strings." 'lexer.cpp.hashquoted.strings' :0: "" "Set to 1 to enable highlighting of hash-quoted strings." 'lexer.cpp.backquoted.strings' :0: 1 "Set to 1 to enable highlighting of back-quoted raw strings ." 'lexer.cpp.escape.sequence' :0: "" "Set to 1 to enable highlighting of escape sequences in strings" 'fold' :0: 1 "" 'fold.cpp.syntax.based' :0: "" "Set this property to 0 to disable syntax based folding." 'fold.comment' :0: 1 "This option enables folding multi-line comments and explicit fold points when using the C++ lexer. Explicit fold points allows adding extra folding by placing a //{ comment at the start and a //} at the end of a section that should fold." 'fold.cpp.comment.multiline' :0: "" "Set this property to 0 to disable folding multi-line comments when fold.comment=1." 'fold.cpp.comment.explicit' :0: "" "Set this property to 0 to disable folding explicit fold points when fold.comment=1." 'fold.cpp.explicit.start' :2: "" "The string to use for explicit fold start points, replacing the standard //{." 'fold.cpp.explicit.end' :2: "" "The string to use for explicit fold end points, replacing the standard //}." 'fold.cpp.explicit.anywhere' :0: "" "Set this property to 1 to enable explicit fold points anywhere, not just in line comments." 'fold.cpp.preprocessor.at.else' :0: "" "This option enables folding on a preprocessor #else or #endif line of an #if statement." 'fold.preprocessor' :0: 1 "This option enables folding preprocessor directives when using the C++ lexer. Includes C#'s explicit #region and #endregion folding directives." 'fold.compact' :0: 0 "" 'fold.at.else' :0: "" "This option enables C++ folding on a "} else {" line of an if statement." JSON json JSON file 'lexer.json.escape.sequence' :0: "" "Set to 1 to enable highlighting of escape sequences in strings" 'lexer.json.allow.comments' :0: "" "Set to 1 to enable highlighting of line/block comments in JSON" 'fold.compact' :0: 0 "" 'fold' :0: 1 "" ... PERL Perl Perl source file 'fold' :0: 1 "" 'fold.comment' :0: 1 "" 'fold.compact' :0: 0 "" 'fold.perl.pod' :0: "" "Set to 0 to disable folding Pod blocks when using the Perl lexer." 'fold.perl.package' :0: "" "Set to 0 to disable folding packages when using the Perl lexer." 'fold.perl.comment.explicit' :0: "" "Set to 0 to disable explicit folding." 'fold.perl.at.else' :0: "" "This option enables Perl folding on a "} else {" line of an if statement." ... PYTHON Python Python file 'tab.timmy.whinge.level' :1: "" "For Python code, checks whether indenting is consistent. The default, 0 turns off indentation checking, 1 checks whether each line is potentially inconsistent with the previous line, 2 checks whether any space characters occur before a tab character in the indentation, 3 checks whether any spaces are in the indentation, and 4 checks for any tab characters in the indentation. 1 is a good level to use." 'lexer.python.literals.binary' :0: "" "Set to 0 to not recognise Python 3 binary and octal literals: 0b1011 0o712." 'lexer.python.strings.u' :0: "" "Set to 0 to not recognise Python Unicode literals u"x" as used before Python 3." 'lexer.python.strings.b' :0: "" "Set to 0 to not recognise Python 3 bytes literals b"x"." 'lexer.python.strings.f' :0: "" "Set to 0 to not recognise Python 3.6 f-string literals f"var={var}"." 'lexer.python.strings.over.newli:0: "" "Set to 1 to allow strings to span newline characters." 'lexer.python.keywords2.no.sub.i:0: "" "When enabled, it will not style keywords2 items that are used as a sub-identifier. Example: when set, will not highlight "foo.open" when "open" is a keywords2 item." 'fold' :0: 1 "" 'fold.quotes.python' :0: 1 "This option enables folding multi-line quoted strings when using the Python lexer." 'fold.compact' :0: 0 "" 'lexer.python.unicode.identifier:0: "" "Set to 0 to not recognise Python 3 unicode identifiers." ...(it was too long, so I pared down results
-
oopss - I’m surprised to see that much info.
Boost::python seems to create the classes with names and values attributes,
which itself do return a dict and this can be iterated.
Something likefor t in LANGTYPE.values.values():
should do the job.
The first values creates the dictionary(hash) and the second a list of LANGTYPE enum members. -
By the way, what always works, but is banned by most of the python programmers
is using eval function. So something likeeval('LANGTYPE.{}'.format('ADA'))will return the LANGTYPE.ADA object.
-
@Ekopalypse said in Help with JSON and Scintilla Lexer:
Something like
for t in LANGTYPE.values.values():Yep. Exactly that syntax worked for me. Much cleaner – and now my saved script will still work in future versions with new LANGTYPEs. :-)
Since the first worked, I didn’t bother with the
eval, though that’s a good alternative. Also, for parsing thedir(...)strings, I would have had to eliminate the various helper methods, too, which I don’t have to do with theLANGTYPE.values.values()syntax, so all-in-all, values were better. :-) -
Sorry for hijacking your thread. In the first few responses, we showed a few of the scripting-languages’ methods for changing that setting. If you need more help, let us know which scripting language you chose, and where you’re having trouble.
-
@PeterJones said in Help with JSON and Scintilla Lexer:
Good timing. I just finished a script to explore this:
As the author of “PerlScript” why don’t you post Perl solutions ??? :-)
Pretty quick but roughly Perl equivalent of the PythonScript you posted:
#!perl use strict; use warnings; use Win32::Mechanize::NotepadPlusPlus ':all'; my $keep = notepad->getLangType(); for my $t ( sort ( keys ( %LANGTYPE ) ) ) { my $n = notepad->getLanguageName($LANGTYPE{$t}); my $d = notepad->getLanguageDesc($LANGTYPE{$t}); printf "%-35s %-35s %-35s\n", $t, $n, $d; notepad->setLangType($LANGTYPE{$t}); for my $s ( split "\n", editor->propertyNames() ) { my $v = editor->getProperty($s); printf "\t'%-32s' :%i: %-32s %s\n" , $s, editor->propertyType($s), '"' . $v . '"', editor->describeProperty($s); } print "\n"; } notepad->setLangType($keep); -
P PeterJones referenced this topic on
-
For future readers:
Approximately two years later, someone put in feature request #11713 to request this toggle. (They also put in a separate request #11676 to add all the features of JSON5/JSONC, not just comments.)
update: This request was implemented and released in v8.4.9 in January 2023 (see release notes item 3)
