Unable to see Data in the Notepad++

[Satya Sriharsha Buddha]

I am able to open the notepad++ and i am able to see that i can type or open new files but i am unable to see the data.

I tried all the settings and options in the notepad++ but still can not figure it out.

Is any one else having similar issue? any help would be appreciated.

Version 8.7.

[Mark Olson]

@Satya-Sriharsha-Buddha said in Unable to see Data in the Notepad++:

i am able to see that i can type or open new files but i am unable to see the data.

What do you mean by see the data? Could you provide an example of some steps you followed, what you expected to happen, and what actually happened?

[mkupper]

@Satya-Sriharsha-Buddha I’m wondering if you want to see the underlying structure of a file. There is a plugin available for Notepad++ called Hex-Editor that may be what you are seeking.

To activate the hex editor

• Select Plugins / Plugins Admin from the menus.
• Type hex in Plugins Admin’s search field.
• Click empty checkbox to the left of the line for Hex-Editor to enable the checkbox and then click the Install button in the upper-right corner of Plugins Admin.
• The new plugin will be downloaded and installed. This causes Notepad++ to exit and restart itself.
• Hex-Editor is now available under the Plugins menu.

You can now toggle hex editor mode on/off for a file by using Ctrl+Alt+Shift+H on the keyboard.

[Alan Kilborn]

Assuming “hex editor” may be a stretch, here.
I think OP should answer Mark’s questions.

[Satya Sriharsha Buddha]

Thanks all for your reply.

i have a .csv file which i am able to open using excel and notepad, but when i open in notepad++, i see that the cursor is moving and data is there in the background but i am unable to see.

If i use find and search for something, it is returning the exact position but i can not see.

There is data here in the file but unable to see.

[PeterJones]

@Satya-Sriharsha-Buddha

If you opened an existing file, Notepad++ wouldn’t be calling it new 1 – the tab would have the filename. I do not think you opened the file you think you did. What steps exactly did you take to open the file?

That said, it does show that new 1 has changes in it, so you’ve obviously got something in the file. Either it’s all spaces (or nbsp or similar), or you have something wrong with your stylers.xml. If you’ve never (intentionally) customized your Settings > Style Configurator settings, then an easy thing to try is to exit all copies of Notepad++, go into %AppData%\Notepad++\ and rename the stylers.xml file to stylers.xml.maybe-bad, then run Notepad++ – if you can now see the data correctly, then your stylers.xml was somehow corrupted. If that doesn’t fix it, then you probably haven’t opened the file you thought you have.

[mkupper]

@Satya-Sriharsha-Buddha
One thought to try is from Notepad++ to do the View / Show Symbol / Show All Characters menu option. If you then do View / Show Symbol then you should see a ✓ checkmark to the left of the View / Show Symbol menu option. This means that Notepad++ will be displaying many of the normally invisible characters.

• Normal spaces will display with an orange dot.
• Tabs will have an orange line ending in an orange orange arrow.
• End of line characters will display with the letters CR and/or LF in white text on a black background.
• Many normally invisible Unicode characters will show a code using white text on a black background.

Here’s an example of Show All Characters where you can see the tab aligned table, spaces used for aligning, etc.

[Satya Sriharsha Buddha]

Hello all,

Thanks for the help, my issue got resolved after removing the appdate and also the notepad++ plugins folder in C drive and reinstalling Notepad++ again.

[mkupper]

@Satya-Sriharsha-Buddha said

Thanks for the help, my issue got resolved after removing the appdate and also the notepad++ plugins folder in C drive and reinstalling Notepad++ again.

Well, that was rather mysterious. For those landing on this forum thread with a similar or “me too” issue I believe it would have helped greatly had the original screenshot also included Notepad++'s status bar much like the screenshot I had posted above in this forum thread. The status bar has useful information that likely would have provided clues about what was happening.

As the original screen shot was cropped we were also missing a hint on where the caret or text cursor was. Its location is noted on the status bar but also should have been visible as a line with a gray background instead of the usual white.

When I made my screenshot I had grabbed the “handle in the lower-right” corner of Notepad++ and dragged the size so that things looked nice. However, I failed to notice that had I shrunk Notepad++'s width enough that the leftmost field of the status bar had disappeared. I should have made it a bit wider so that all of the status bar fields are visible.

[Goff Fred]

Hello, I just had the same issue in Win 11. I tried uninstalling, deleting folders, etc. After reinstalling I could see the text OK, until I resized the window, then nothing again. N++ was working fine yesterday. Today I installed Mozilla Thunderbird [because MS will not accept that I am NOT going to use Outlook! instead of Mail :( ]. I uninstalled Thunderbird, but still no change. The only way I could get N++ working again on my machine was a system restore. I’d rather N++ than the email :)

[PeterJones]

@Goff-Fred ,

Can you share your ? menu’s Debug Info? Because I’ve been using Notepad++ v8.7 since it was released, and I’ve frequently resized the window on both Win10 and Win11, and have never had the text color magically switch to white when it resizes.

[Goff Fred]

@PeterJones as below. This is the working version now again sorry, not the version that the text, etc wasn’t visible

Notepad++ v8.6.7 (64-bit)
Build time : May 12 2024 - 20:04:00
Path : C:\Program Files\Notepad++\notepad++.exe
Command Line : “C:”
Admin mode : OFF
Local Conf mode : OFF
Cloud Config : OFF
Periodic Backup : ON
OS Name : Windows 11 Home (64-bit)
OS Version : 23H2
OS Build : 22631.4317
Current ANSI codepage : 1252
Plugins :
mimeTools (3.1)
NppConverter (4.6)
NppExport (0.4)

[Goff Fred]

@PeterJones Also, I don’t think it was just the text being white? see the line numbers, etc was also blank. And the screengrab with the scroll bars, Even when I opened a new or another file, the screen within the “textbox” didn’t change, it was frozen. Then if I closed and reopened the program, the previously opened files would just be white only.

[PeterJones]

@Goff-Fred said in Unable to see Data in the Notepad++:

This is the working version now again sorry, not the version that the text, etc wasn’t visible

Well, that makes it more difficult to help you, because the Debug Info on the version you are having with could be more informative to someone than the Debug Info on the version that’s working for you. But assuming the v8.7 that you were having difficulty with had the same plugins, and other settings (other than just the version), I am not seeing anything that triggers an idea for me.

Maybe someone else will have ideas, or debug steps. (But if someone does ask you for more information, unless they tell you otherwise, they mean for v8.7 which you are having difficulty with, not for the older copy that you’re not.)

[mkupper]

Thank you @Goff-Fred. Those screen shots were helpful. I’m fascinated and puzzled by the bottom one. I had always thought that files/tabs were always “full screen” within the Notepad application. Your Notepad++ seems to have a windowed look within the application though it’s also only showing one open tab. I’m wondering if you are using either a Notepad++ plugin or an external application to allow multiple document windows within Notepad++.

This is the screen shot I’m writing about:

[Sabin Popescu]

Hello there.
I have the same issue as @Goff-Fred, when using the installed npp 8.7.7 .
If I use the portable version of npp 8.7 , everything seems to be fine

[Alan Kilborn]

@mkupper said:

I’m wondering if you are using either a Notepad++ plugin

His debug info showed no odd plugins…

[xomx]

@Goff-Fred said in Unable to see Data in the Notepad++:

Command Line : “C:”

?!
I noticed this debug info cmdline param - if I’m not mistaken, it means that the OP tried to open all the files on the C: drive in N++!

Anyway, because it’s about graphics, I’d try to play with the Preferences > MISC. > DirectWrite checkbox setting.

[Brad Martin]

@xomx This fixed it for me. Thank you!!!

[Sabin Popescu]

I’ve noticed that I only have the issue on my secondary display.
On the primary display of my laptop, the data/file contests are displayed properly:

On the secondary display , the data gets “lost” :

Hope it helps