Paste every "say 37th line" apx..



  • I know this is strange but trying to figure out how to do this about 342 times…lol…
    I want to paste this…sound = “sound” ; sound folder

    Note the location of this line is after or just under this line: isuserselectable = 0 ; flag off for non selectable planes

    If i counted it about 37 lines below to next instance or can it just be inserted automatically after/under this line every time it appears in document? isuserselectable = 0 ; flag off for non selectable planes There are 342 instances of this and it would kill me to add this 342x…lol…any ideas…

    Here’s what it would look like:
    [FLTSIM.274]

    ; LEGACY
    title = AIGAIM_Thai AirAsia Airbus A320-200 - Truely ASEAN ; Variation name
    model = CFM AIQ-Thai AirAsia_Truely ASEAN ; model folder
    texture = AIQ-Thai AirAsia_Truely ASEAN ; texture folder
    atc_airline = THAI ASIA ; airline name
    atc_parking_types =RAMP,GATE ; “ANY” / “RAMP” / “CARGO” / “MIL_CARGO” / “MIL_COMBAT” / “GATE” / “DOCK”
    atc_parking_codes = AIQ ; Comma separated and may be as small as one character each
    icao_airline = “AIQ” ; ###
    ui_type = Airbus A320-200 ; e.g. 747-400, 172
    isairtraffic = 1 ; airtraffic flag for variations
    isuserselectable = 0 ; flag off for non selectable planes
    sound = “sound” ; sound folder
    ; MODERN
    ;-panel = “” ; panel folder
    ;-sound = “” ; sound folder
    ;-kb_checklists = “” ; Procedures/Checklist sibling file name
    ;-kb_reference = “” ; Reference information sibling file name
    ;-description = “$$:Generic plane for Air Traffic” ; Variation description.
    ;-wip_indicator = 0 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
    ;-ui_manufacturer = “$$:Generic” ; e.g. Boeing, Cessna
    ;-ui_variation = “$$:Default” ; e.g. World Air, IFR Panel
    ;-ui_typerole = “Single Engine Prop” ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
    ;-ui_createdby = “Asobo Studio” ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
    ;-ui_thumbnailfile = “” ; app relative path to ThumbNail image file
    ;-ui_certified_ceiling = -1 ; service ceiling / max certified operating altitude (ft)
    ;-ui_max_range = -1 ; max distance the aircraft can fly between take-off and landing in (NM)
    ;-ui_autonomy = -1 ; max duration the aircraft can fly between take-off and landing in (Hrs)
    ;-ui_fuel_burn_rate = -1 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
    ;-atc_id = “AS-SGP1” ; tail number
    ;-atc_id_enable = 1 ; enable tail number
    ;-atc_flight_number = “” ; flight number
    ;-atc_heavy = 0 ; heavy?
    ;-atc_id_color = “” ; color for the tail number : i.e. “#ffff00ff”
    ;-atc_id_font = “” ; font for the tail number
    ;-sim = Cessna172SP ;

    [FLTSIM.275]

    ; LEGACY
    title = AIGAIM_Thai VietJet Air Airbus A320-200 ; Variation name
    model = CFM TVJ-Thai VietJet Air ; model folder
    texture = TVJ-Thai VietJet Air ; texture folder
    atc_airline = THAIVIET JET ; airline name
    atc_parking_types =RAMP,GATE ; “ANY” / “RAMP” / “CARGO” / “MIL_CARGO” / “MIL_COMBAT” / “GATE” / “DOCK”
    atc_parking_codes = TVJ ; Comma separated and may be as small as one character each
    icao_airline = “TVJ” ; ###
    ui_type = Airbus A320-200 ; e.g. 747-400, 172
    isairtraffic = 1 ; airtraffic flag for variations
    isuserselectable = 0 ; flag off for non selectable planes
    sound = “sound” ; sound folder
    ; MODERN
    ;-panel = “” ; panel folder
    ;-sound = “” ; sound folder
    ;-kb_checklists = “” ; Procedures/Checklist sibling file name
    ;-kb_reference = “” ; Reference information sibling file name
    ;-description = “$$:Generic plane for Air Traffic” ; Variation description.
    ;-wip_indicator = 0 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
    ;-ui_manufacturer = “$$:Generic” ; e.g. Boeing, Cessna
    ;-ui_variation = “$$:Default” ; e.g. World Air, IFR Panel
    ;-ui_typerole = “Single Engine Prop” ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
    ;-ui_createdby = “Asobo Studio” ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
    ;-ui_thumbnailfile = “” ; app relative path to ThumbNail image file
    ;-ui_certified_ceiling = -1 ; service ceiling / max certified operating altitude (ft)
    ;-ui_max_range = -1 ; max distance the aircraft can fly between take-off and landing in (NM)
    ;-ui_autonomy = -1 ; max duration the aircraft can fly between take-off and landing in (Hrs)
    ;-ui_fuel_burn_rate = -1 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
    ;-atc_id = “AS-SGP1” ; tail number
    ;-atc_id_enable = 1 ; enable tail number
    ;-atc_flight_number = “” ; flight number
    ;-atc_heavy = 0 ; heavy?
    ;-atc_id_color = “” ; color for the tail number : i.e. “#ffff00ff”
    ;-atc_id_font = “” ; font for the tail number
    ;-sim = Cessna172SP ;

    [FLTSIM.276]

    ; LEGACY
    title = AIGAIM_Thai VietJet Air Airbus A320-200 - Albino ; Variation name
    model = CFM TVJ-Thai VietJet Air_Albino ; model folder
    texture = TVJ-Thai VietJet Air_Albino ; texture folder
    atc_airline = THAIVIET JET ; airline name
    atc_parking_types =RAMP,GATE ; “ANY” / “RAMP” / “CARGO” / “MIL_CARGO” / “MIL_COMBAT” / “GATE” / “DOCK”
    atc_parking_codes = TVJ ; Comma separated and may be as small as one character each
    icao_airline = “TVJ” ; ###
    ui_type = Airbus A320-200 ; e.g. 747-400, 172
    isairtraffic = 1 ; airtraffic flag for variations
    isuserselectable = 0 ; flag off for non selectable planes
    sound = “sound” ; sound folder

    Ithe sound line needs to go just under the line above it 342 times…yikes… Hope you’re not lost… Thank you so much for any help!!

    BobM.



  • Hello, @carolina-number-1 and All,

    If I understand you properly, you would like to insert the line sound = "sound" ; sound folder right after each line isuserselectable = 0 ; flag off for non selectable planes of the current file !

    I assume, too, that the desired replacement is the string sound = "sound" ; sound folder and NOT the string sound = “sound” ; sound folder

    In this case, I suppose that this regex S/R should work nice :

    SEARCH (?-i)isuserselectable = 0 ; flag off for non selectable planes\R\K

    REPLACE sound = "sound" ; sound folder\r\n    ( OR sound = "sound" ; sound folder\n if UNIX files )

    Notes :

    • Tick the Wrap around option

    • Use the Regular expression search mode

    • Click, exclusively on the Replace All button

    • After searching for the line isuserselectable = 0 ; flag off for non selectable planes, respecting the case (?-i) and its line-ending characters \R, the \K feature resets the search and simply matches the zero-length location, right after this line

    • Then, the replacement string sound = "sound" ; sound folder is just added with its line-ending characters \r\n

    Best Regards,

    guy038



  • OMG…Fantastic…reading this and figuring how to do this…
    Bestest!!

    BobM.



  • @Carolina-Number-1

    The key part seems to be needing to know the way to insert a line-break.
    I’m not much for Extended search mode, but I think you could use it here to do what you want… you would use \r\n in your replacement string where you wanted a line-break.
    It’s a little bit simpler to figure out than regular expressions, so that’s why I’m mentioning it.



  • In the “Replace All”…don’t see a “exclusively”,

    Thanks so far, BobM.



  • @Alan-Kilborn

    total newbie here



  • @Carolina-Number-1 said in Paste every "say 37th line" apx..:

    In the “Replace All”…don’t see a “exclusively”,

    LOL. Guy is French so sometimes his wording is “interesting”. :-)
    (In general though, his English is very good, indeed)

    Click, exclusively on the Replace All button

    What is meant here is that you can’t use the Replace button for this action; you have to use Replace All to perform the replacement.



  • ok…so just click on Replace All…there is no tick for exclusively, right lol



  • @Carolina-Number-1 said in Paste every "say 37th line" apx..:

    total newbie here

    :-) Welcome.

    If you have questions about what advice we give, certainly ask. :-)



  • ok so search for isuserselectable = 0 ; flag off for non selectable planes…so far so good lol



  • @Carolina-Number-1

    not sure about what of this goes in the search line?
    After searching for the line isuserselectable = 0 ; flag off for non selectable planes, respecting the case (?-i) and its line-ending characters \R, the \K feature resets the search and simply matches the zero-length location, right after this line



  • @Alan-Kilborn

    not sure about what of this goes in the search line?
    After searching for the line isuserselectable = 0 ; flag off for non selectable planes, respecting the case (?-i) and its line-ending characters \R, the \K feature resets the search and simply matches the zero-length location, right after this line

    once i get the hang of this…then i have maybe 100 more airplanes …lol



  • @Carolina-Number-1

    So, when @guy038 said:

    SEARCH (?-i)isuserselectable = 0 ; flag off for non selectable planes\R\K

    REPLACE sound = “sound” ; sound folder\r\n ( OR sound = “sound” ; sound folder\n if UNIX files )

    He meant for “SEARCH” that you would put this in the box labeled Find what:

    And correspondingly, “REPLACE” means look for the Replace with box.

    Does that help?



  • @Alan-Kilborn

    yeah…I think I lost my “isuserselectable = 0 ; flag off for non selectable planes” because it replaced it with the sound stuff…lol but it added sound i think 736 times…so rather than replace that line…insert the sound line below it…this was on a trial cfg not the real one yet till i get this down.



  • @Carolina-Number-1

    But, because you’re an admitted noob, why not do a simpler-to-understand Extended mode replacement, like this:

    58fdc235-dae6-4e51-beba-5e5351f3f61f-image.png

    Notice:

    • the Search mode has been set to Extended – this allows you to do fancy things (over and above what a Normal search allows) like specify multiple lines in your data (here you are replacing one-line with two (the original plus a new one).

    • the \r\n in the Replace with data is what creates a second line in your data; it is the “dividing point” between two lines

    Is this easier to see/understand?



  • Hi, @carolina-number-1

    eeb17561-1990-459b-a59d-9676327f3b76-image.png

    BR

    guy038



  • @guy038

    Hey Thanks All!!!

    You are great!!!

    I am 70 and a tad slow but getting it, i think lol



  • @guy038
    t seems now its just stopped replacing…say no occurences were replaced …etc

    Thank you,
    Bob M.



  • If I need to change this: isuserselectable = 0 ; flag off for non selectable planes to this:

    isUserSelectable = 0 ; (on the end of search line after 0 ; \R\K

    and still replace with:

    sound = “sound” ; sound folder (sound = “sound” ; sound folder\r\n)



  • @carolina-number-1,

    Your last post isn’t quite clear but I guess you would like to add the line sound = "sound" ; sound folder right after each line beginning with isuserselectable = 0, whatever the contents of a possible comment area, coming next the colon character

    If so, change the search regex, only, as :

    SEARCH (?-si)isuserselectable = 0.*\R\K

    • The (?-s) part means that any dot meta-character matches a single standard character

    • The .* syntax, before the \R , represents the area, possibly empty, of standard character(s), after the string = 0 and before the EOL chars

    I advice you to get documentation on the regex world, in this FAQ

    Best regards,

    guy038


Log in to reply