Call Tip Color change

Lycan Thrope

@ekopalypse said in Call Tip Color change:

Is LAZY or ATSTARTUP set in the config?

ATSTARTUP. Else the console wouldn’t be shown, right? Now if it’s not loading the startup.py, that could be a problem, but not sure how to tell. The console is coming up and my assumption is that the startup.py is also starting up. Would that be an accurate assumption?

Lee

Ekopalypse

@lycan-thrope

No, the console will(should) open always. Gimme a sec to test something.

Lycan Thrope

@ekopalypse ,
Ok. Here’s a screenshot of my config Machine view:

I can do what ever you suggest, if I am setup right. That is the question we’re looking at. :-)

Lee

Ekopalypse

@lycan-thrope

and in User Scripts there is nothing?

My fresh setup test

PeterJones

@lycan-thrope ,

I have no idea and am all ears.

One thing I do in my user startup.py (and could be done in the system startup.py as well) is to add console writes to the beginning and end of the script

example user startup.py

from Npp import *
import sys

console.write("Start of user startup.py\n")
...
... other commands here
...
console.write("END of user startup.py\n\n")

If I see those two lines printed, then I know that the user startup.py actually ran; if they aren’t printed, then something went wrong.

…

While I was typing this, there were more exchanges.

I usually reboot and restart in Admin mode

Reboot is unecessary for Notepad++ and plugins. They will do the same thing after reboot as after a complete exit and restart.

Do you mean “Run as Admin”, or do you mean you log in as the Administrator user after your reboot? Because the Administrator user will have a different %AppData% than your normal user, so the user startup.py won’t be in the right place.

Also, you should really look at your Plugins > Python Script > Configuration like Eko showed:

If you have User Scripts selected and don’t see startup.py in the Scripts box (like Eko’s is empty), then you do not have any user scripts… which means, if you think you are editing the user startup.py like Eko suggested earlier, you are not. edit: if you’re intentionally just using system startup.py, that is of course your perogative.

At this point, showing us the screenshots of User Scripts and Machine Scripts, with startup.py visible in both (if they exist) would be great – oh, you’ve posted machine-scripts while I was writing this paragraph; along with the copy/paste of your current Debug Info , along with the exact location of the startup.py that you are editing.

Ekopalypse

@lycan-thrope

Lycan Thrope

@peterjones ,

I “Run as Admin”, right click on starting NPP. I am in Admin mode, as far as I know, but still seem to have to open certain things “Run as Admin” when I want to save to admin only areas with applications. I could be wrong, however and it would be the first time. :-)

First debug info:

Notepad++ v8.1.9.3 (64-bit)
Build time : Dec 6 2021 - 19:21:37
Path : C:\Program Files\Notepad++\notepad++.exe
Command Line :
Admin mode : ON
Local Conf mode : OFF
Cloud Config : OFF
OS Name : Windows 10 Home (64-bit)
OS Version : 2009
OS Build : 19043.1466
Current ANSI codepage : 1252
Plugins : ComparePlugin.dll mimeTools.dll NppConverter.dll NppExport.dll NppXmlTreeviewPlugin.dll PythonScript.dll XMLTools.dll

This is the Config User Script section:

And this is the file location on the Header bar showing the path to the current file:

Lee

Lycan Thrope

@peterjones ,

Took your hint, Peter, added the two lines you suggested, in the “supposed” auto startup, and it’s not running as far as I can tell. Here’s the screenshot after changing and adding those lines to what I presume is the actual startup file, rebooted NPP, restarted “Run as administrator”, and this is the result:

As you can see, no lines in the console.

And the prior statement, though tongue in cheek, was a typo also, meaning, it’s not like I haven’t been wrong before so I may well be wrong this time, about being in the Admin mode running my system.

Lee

Lycan Thrope

@lycan-thrope
On the off chance I had the first line in the wrong place, I put it below the console redirection, saved, rebooted, restarted as admin and took this shot, still no response:

Lycan Thrope

@lycan-thrope
And just in case that asterisk was supposed to be put at the front of the import, I included that again and rebooted and ran, with the same result:

Michael Vincent

@lycan-thrope said in Call Tip Color change:

Took your hint, Peter, added the two lines you suggested, in the “supposed” auto startup, and it’s not running as far as I can tell. Here’s the screenshot after changing and adding those lines to what I presume is the actual startup file, rebooted NPP, restarted “Run as administrator”, and this is the result:

Not a Python expert, but surprised you’re not getting an error. You only import editor1 and editor2 from Npp, not console, but you proceed to call console. I checked, there doesn’t seem to be a console method in sys so not sure why you’re not seeing an error.

Maybe your Npp import line should be :

from Npp import console, editor1, editor2

or better yet, since it’d be beneficial to import all Npp into your PythonScript console:

from Npp import *

Did you try not running in Admin mode?
Did you try to use the user startup.py located in (assuming from your image):
C:\Program Files\Notepad++\plugins\Config\PythonScript\scripts\startup.py

Cheers.

PeterJones

@lycan-thrope

So it’s obviously not running the startup.py that you are editing.

When i run, I will see:

or

(so when I change the color and restart notepad++, it changes the color)

Running in Admin mode is just asking for trouble. But I tried with my portable setup (the one I am showing), and it still ran my startup script

I don’t know what you’ve corrupted, but you’ve done something tp mess it up so it’s not trying to run the startup.py … Please reset to the file below

# The lines up to and including sys.stderr should always come first
# Then any errors that occur later get reported to the console
# If you'd prefer to report errors to a file, you can do that instead here.
import sys
from Npp import *
console.write("START of machine startup.py\n\n")

# Set the stderr to the normal console as early as possible, in case of early errors
sys.stderr = console

# Define a class for writing to the console in red
class ConsoleError:
	def __init__(self):
		global console
		self._console = console;

	def write(self, text):
		self._console.writeError(text);

# Set the stderr to write errors in red
sys.stderr = ConsoleError()

# This imports the "normal" functions, including "help"
import site

sys.stdout = console

# In order to set the stdout to the current active document, uncomment the following line
# sys.stdout = editor
# So print "hello world", will insert "hello world" at the current cursor position

########## added:
for e in (editor1,editor2):
    e.callTipSetBack((255,255,176))
    e.callTipSetFore((127,0,0))

console.write("END of machine startup.py\n\n")
console.show()

make sure it’s ATSTARTUP, exit Notepad+ and re-run. If it doesn’t open the console window and show your prints, then you do not have things set up the way you think you do, or you have corrupted some other file with all your messing about.

Lycan Thrope

@michael-vincent ,

I’m beginning to wonder if I’m supposed to actually have Python loaded. My presumption, is that the Python Script is a fully contained solution. The console stuff being called, is in the default startup.py file. I only modifed and then cutout the section where the console class was, since you said to start fresh, and only paste in such and such, I removed that reference. This is what I cut out of the original startup.py:

# Define a class for writing to the console in red
class ConsoleError:
	def __init__(self):
		global console
		self._console = console;

	def write(self, text):
		self._console.writeError(text);

# Set the stderr to write errors in red
sys.stderr = ConsoleError()

# This imports the "normal" functions, including "help"
import site

#sys.stdout = console

# In order to set the stdout to the current active document, uncomment the following line
 sys.stdout = editor
# So print "hello world", will insert "hello world" at the current cursor position

Since it wasn’t even printing out to the file the hello world and was only echoing what I was typing in to the console, it didn’t seem to be functioning either. Still, no errors. :-(

Lee

PeterJones

@lycan-thrope ,

My presumption, is that the Python Script is a fully contained solution

It is.

I only modifed and then cutout the section where the console class was, since you said to start fresh,

Cutting things out of code you don’t understand is not a good idea, unless you are able to get it back in just as easily as you take it out.

“Start fresh” was supposed to mean “start with the defaults”, not “delete everything, even stuff you didn’t write”.

The startup.py that I shared is the default machine startup.py, with a couple things added. But maybe that’s even too much to hope for right now.

Let’s start from scratch: download a portable Notepad++, and unzip to some other location than your normal Notepad++. Run that notepad++ (not as admin). Install PythonScript. Create a user startup.py (Plugins > Python Script > New Script, startup.py and it should default to trying to put it in ...\plugins\config\pythonscript\scripts

from Npp import *

console.write("this is my portable _user_ startup.py\n")
console.show()

Do not touch or edit the machine startup.py

Lycan Thrope

@peterjones ,

Well, it appears the mucking about may have been the problem, but I came here right after it didn’t run, as is. Thank you, and now I have to figure out why it didn’t work as is, but at least I have a working example to learn from. I’m sorry if this is frustrating to you. It is to me, too. I try to follow exact directions when I do this stuff and for some reason, it sometimes doesn’t work as is. Mind you, after you help me get it going, when I pass it on to the community, I have to be able to answer as well, why something isn’t working when just following the standard install and running of the plugin.

Here’s your script pasted in, restarted, and the results:

And I always mean, thank you when I say it, and here’s the picture to say it:

Now the only thing I have to do, is figure out a different color scheme, and make sure it works for everyone that uses this, which means they’ll have to install PythonScript and all this good stuff, I have to know also. Thanks for always having the right answer, Peter.

Thank also to Michael and Eko for trying to help as well.

Lee

Lycan Thrope

@peterjones said in Call Tip Color change:

Cutting things out of code you don’t understand is not a good idea, unless you are able to get it back in just as easily as you take it out.
“Start fresh” was supposed to mean “start with the defaults”, not “delete everything, even stuff you didn’t write”.

I agree, Peter. When I got my first response, I was only adding to the stock file. The only thing I did, was uncomment the one section in the code that it said to to redirect the output, originally. That was it. It didn’t work, so proceeded to come here to show what was happening and get advice. I’m not the sharpest tack in the drawer, but I’d like to think I’m not the dull end either. :-)

Thanks again for your help.

Lee

Lycan Thrope

@peterjones ,

Just so we’re clear, if you look at one of my original posts way up there, this is the only section I changed, according to the instructions in the comment section it’s in:

# In order to set the stdout to the current active document, uncomment the following line
# sys.stdout = editor
# So print "hello world", will insert "hello world" at the current cursor position

This NOT working, is what prompted me to then comment out:

sys.stdout = console

My erroneous assumption being that if you want it to go the editor and not the console, you have to comment out the other, but as you can see, I was trying just trying to get the file to do what the comments indicated I should do for a certain response. Maybe I read, too much? :-)

Lee

Lycan Thrope

@ekopalypse
For future reference, it’s at the bottom of the file in:
/Program Files/Notepad++/plugins/PythonScript/doc/usage.html at the bottom a paragraph or two just above the Startup section. :-)

Lee

Lycan Thrope

@peterjones
I’m going to follow your examples here, as well, for educational purposes, and again, I thank you for this breakdown.

My purpose for wanting to put it into the machine startup.py, is to streamline the installation and use of this enhancement for our UDL/FunctionList/AutoCompletion package so it’s not an involved process for. less technical users. I’m putting together an install package to try and automate the installation of the dBASE Plus package into NPP. If it’s included in the machine startup, then I can copy the file needed and that’s that. Perhaps, I can do it another way, with your examples above so it doesn’t mess with the standard settings and only adds the additional ability.

Not everyone is brave enough to admit, they don’t know what they’re doing and trying to understand outside of their comfort zone, how to do things. I’m just dumb enough to be more concerned with how to make things work than any illusory pride.
Lee

Lycan Thrope

@peterjones ,

Your example works perfectly, so that means I can create a user script and install it in that directory and it will start for the user after they start the PythonScript plugin. I only need to see if there is a way to set the default startup to ATSTARTUP and we’re good. This way, it’ll do it with minimal intervention of the user. Right?

Lee