Multi selection and multi edit

guy038

Hi, Claudia,

Until your recent script, I didn’t interfere, in that discussion, because I thought that a simple S/R, in regex mode, was enough to get the same behaviour. Indeed :

For Replacement : SEARCH = "Searched word" and REPLACEMENT = "Replacement word"
For Insertion before : SEARCH = "Searched word" and REPLACEMENT = "Added word${0}"
For Insertion after : SEARCH = "Searched word" and REPLACEMENT = "${0}Added word"

But, your last script, with the different area options, shows, clearly, the advantages of a script ;-)) Your script should satisfy everyone !

However, I just noticed a minor bug : if you start the script by mistake, and that you want to stop it, the Cancel button does NOT work. So, the only choice is the Yes button !

Cheers,

guy038

BTW, if your file is quite important, it can take some seconds, before all the matches are highlighted !!

Vasile Caraus

@dail

agree

Claudia Frank

@guy038

there is no need for a stop routine as it is a per one time execution script - no callbacks.
You run the script and all it does is to select the different instances of the selected word.
Once everything has been selected it finishes instantly.

You are right, it hasn’t optimized for speed but I think it doesn’t make sense to edit
a huge file and use this little helper to replace all occurrences of a string. Npps
builtin feature is much faster in this way.

Cheers
Claudia

Scott Sumner

@Claudia-Frank

I think what @guy038 meant was, what if you start the script running, get the prompt dialog box on the screen, and then change your mind and decide you don’t want to do what you started after all.

Claudia Frank

@Scott-Sumner

ahh - ok - yes correct - but just press ok and move cursor.
Nothing changed.

Cheers
Claudia

Claudia Frank

finally I understand - the cancel button !! phew – need a cup of coffee!

Cheers
Claudia

Claudia Frank

cancel button fix

# this script implements the enhanced multi cursor edit functionality

def default_positions():
    return 0, editor.getLength()

def get_pos_of_bookmarks():
    npp_bookmark_marker_id_number = 24
    npp_bookmark_marker_mask = 1 << npp_bookmark_marker_id_number
    _start_position, _end_position = default_positions()
    
    line_nbr = editor.markerNext(_start_position, npp_bookmark_marker_mask)
    if line_nbr != -1:
        _start_position = editor.positionFromLine(line_nbr)
        line_nbr = editor.markerNext(line_nbr + 1, npp_bookmark_marker_mask)
        if line_nbr != -1:
            _end_position = editor.getLineEndPosition(line_nbr)
    return _start_position, _end_position

def get_pos_of_visible_lines():
    first_visible_line = editor.getFirstVisibleLine()
    _start_position = editor.positionFromLine(first_visible_line)
    lines_visible = editor.linesOnScreen()
    last_visible_line = editor.docLineFromVisible(first_visible_line+lines_visible)
    _end_position = editor.getLineEndPosition(last_visible_line)
    return _start_position, _end_position

def get_pos_of_selections():
    _start_position, _end_position = default_positions()
    if editor.getSelections() == 2:
        _start_position = editor.getSelectionNStart(0)
        _end_position = editor.getSelectionNEnd(1)
    return _start_position, _end_position


area_dict = {'a':default_positions,
             'b':get_pos_of_bookmarks,
             's':get_pos_of_selections,
             'v':get_pos_of_visible_lines}
    
editor.beginUndoAction()

def Main():
    _text = editor.getTextRange(editor.getSelectionNStart(0), editor.getSelectionNEnd(0))
    if len(_text) != 0:

        _current_position = editor.getCurrentPos()
        _current_line = editor.lineFromPosition(_current_position)
        _current_word_start_pos = editor.getLineSelStartPosition(_current_line)
        _current_word_end_pos = editor.getLineSelEndPosition(_current_line)

        find_flag = 2 # 0=DEFAULT, 2=WHOLEWORD 4=MATCHCASE 6=WHOLEWORD | MATCHCASE
        mode_options = ' 0=replace,  1=before,  2=afterwards\n'
        area_options = ' a=all, b=bookmarks, s=selected, v=visible'
        expected_results = [x+y for x in ['0','1','2'] for y in ['a','b','s','v']]
           
        result = notepad.prompt(mode_options + area_options, 'Choose the desired option', '0a')
        while result not in expected_results: 
            if result is None:
                return
            result = notepad.prompt(mode_options + area_options, 'Choose the desired option', '0a')

        chosen_mode, chosen_area = result
        area_start_position, area_end_position = area_dict[chosen_area]()
        
        if chosen_mode == '0': # replace whole string version
            editor.setEmptySelection(_current_position)       
            position_tuple = editor.findText(find_flag, area_start_position, area_end_position, _text)
            
            while position_tuple is not None:
                if _current_position not in position_tuple:
                    editor.addSelection(*position_tuple)
                position_tuple = editor.findText(find_flag, position_tuple[1], area_end_position, _text)
                    

        elif chosen_mode == '1': # insert before selected string version
            editor.setEmptySelection(_current_word_start_pos)
            position_tuple = editor.findText(find_flag, area_start_position, area_end_position, _text)
            
            while position_tuple is not None: 
                startpos, endpos = position_tuple
                if startpos != _current_position and endpos != _current_position:
                    editor.addSelection(startpos, startpos)
                else:
                    _current_word_start_pos, _current_word_end_pos = startpos, startpos
                position_tuple = editor.findText(find_flag, endpos, area_end_position, _text)


        elif chosen_mode == '2': # insert after selected string version
            editor.setEmptySelection(_current_word_end_pos)
            position_tuple = editor.findText(find_flag, area_start_position, area_end_position, _text)
            
            while position_tuple is not None: 
                startpos, endpos = position_tuple
                if startpos != _current_position and endpos != _current_position:
                    editor.addSelection(endpos, endpos)
                else:
                    _current_word_start_pos, _current_word_end_pos = endpos, endpos
                position_tuple = editor.findText(find_flag, endpos, area_end_position, _text)

                
        # now add the current selection
        editor.addSelection(_current_word_start_pos, _current_word_end_pos)

Main()
editor.endUndoAction()

Cheers
Claudia

kpym

I want to advocate too for CTRL+D sublime-like build-in shortcut.
This is the most useful way to use multi-cursors :

add next identical
skip next identical
select all identicals

Alan Kilborn

@kpym

So maybe on the surface this seems different, but this is really just a Find and Replace operation, for which Notepad++ already has a good solution for. Here’s a comparision:

your ctrl+d <–> N++'s press ctrl+h, fill in replace field
your add/skip next identical <–> N++ either “Find Next” or “Replace”
your select all identicals <–> N++ “Replace All”
your “whatever action you would do on what is multiselected…” <–> N++'s nothing to do, it’s already done!

bitagoras

@Alan Kilborn
What you irgnore in your comment is the fact that Ctrl+D function is mainly used to quickly clone the cursor at positions of identical strings and not neccessarily to replace the selected. Once you have multiple cursors, you can move them and do much more things than just renaming. I uploaded a gif animation that shows what I mean:

https://gifyu.com/image/TaVW

It’s really magic what you can to with it and safes you a lot of time with a minimum of commands to remember. It is very intuitive and in most of the cases faster than search / replace or macro recording. Sometimes I use VS Code in parallel with Notepad++ only because of this function.

What is missing to make full use of this kind of multi editing:

Ctrl+D (or another shortcut) to clone the cursor at similar occurences of the current word or selection.
Multiple cursors should stay persistent until escape is pressed (as in the plugin “better multiselection”).
Ctrl+mouseclick should not only add but also remove one cursor (when Ctrl+D has produced an unwanted cursor).
Every cursor should have an indiviual clipboard.

Scott Sumner

@bitagoras

This kind of functionality really has nothing to do with Notepad++ itself, but rather is Scintilla-related. Scintilla in Notepad++ is known to be very outdated. Would upgrading Scintilla to the latest version provide such functionality? I don’t know, but since remaining current with Scintilla doesn’t seem to be a priority of Notepad++ developers, it probably isn’t worth much discussion here. :-(

bitagoras

I think with a little bit of programming it could be possible with scintilla but it is not a standard feature that can just be activated.

But you say the Notepad++ developers plan to replace Scintilla? Do you know any details? I haven’t seen any discussion here on this. I wonder, if this wouldn’t be just another new editor but not Notepad++ any more.

Scott Sumner

@bitagoras said:

but it is not a standard feature that can just be activated

Maybe not, I didn’t investigate–but I seem to recall that some of the “fancier” multi-selection stuff is available in newer Scintilla versions…but I don’t know if it takes it to the level of your examples. I really don’t care…until Notepad++ updates to something newer, and THEN I’ll take the time to explore what new features it provides.

you say the Notepad++ developers plan to replace Scintilla?

I most certainly did NOT say that! :-)

guy038

Hello, @bitagoras, @scott-sumner and All,

@bitagoras, why don’t you use the excellent @Dail plugin BetterMultiselection version v1.3 ? See, below :

https://github.com/dail8859/BetterMultiSelection/

https://github.com/dail8859/BetterMultiSelection/releases

https://notepad-plus-plus.org/community/topic/13653/new-plugin-bettermultiselection

Note that, if you have the last v7.6 version of N++, you’ll have to :

Create the new directory BetterMultiSelection, under your active plugins folder
Place the BetterMultiSelection.dll inside the BetterMultiSelection folder

Now, assuming the test test, below :

abcde fghijk lmno pqr..stuv wxyz 012345789
abcde fghijk lmno pqr..stuv wxyz 012345789
abcde fghijk lmno pqr..stuv wxyz 012345789
abcde fghijk lmno pqr><stuv wxyz 012345789
abcde fghijk lmno pqr><stuv wxyz 012345789
abcde fghijk lmno pqr><stuv wxyz 012345789
abcde fghijk lmno pqr..stuv wxyz 012345789
abcde fghijk lmno pqr..stuv wxyz 012345789
abcde fghijk lmno pqr..stuv wxyz 012345789

Create a column-mode selection, on the 3 middle lines, between the angle brackets ><
And, now have fun, playing around, with any of the following keys or shortcuts, below ;-))
- Home , End , Left , Right , Ctrl + Left , Ctrl + Right
- Shift + Home, Shift + End , Shift + Left, Shift + Right , Ctrl + Shift + Left , Ctrl + Shift + Right
- Backspace , Delete , Ctrl + Backspace , Ctrl + Delete
- Up, Down , Shift + Up, Shift + Down
- Enter , Tab , Shift + Tab

Just a pleasure, isn’t it ? Many thanks, again, @dail, for this very useful plugin, while waiting for this native behavior in N++, after a future update of Scintilla !

Though I suppose,it will not happen soon, as I guess that @don-ho is quite busy with the new plugin’s organization :-)

Best Regards,

P.S. :

You may be interested, too, by this other @dail useful plugin SurroundSelection.dll. See, below :

https://github.com/dail8859/SurroundSelection/

https://github.com/dail8859/SurroundSelection/releases

https://notepad-plus-plus.org/community/topic/13610/new-plugin-surroundselection

bitagoras

@Scott-Sumner

I most certainly did NOT say that! :-)

Sorry that I misunderstood you sentence. What you say is that it is a priority to upgrade to a new Scintilla version rather than tinker with the current version. I agree.

@guy038,

Yes BetterMultiSelection works very well. But the mulit clipboard and the Ctrl+D would make it perfekt.

Here the example again. I just figured out how to embedd the GIF.

Scott Sumner

@bitagoras said:

What you say is that it is a priority to upgrade to a new Scintilla version rather than tinker with the current version

I didn’t say THAT either (I don’t know WHAT if any Scintilla-based decisions are being made, or how they are made), but I agree as well. :-)

I just figured out how to embedd the GIF.

I don’t see the embedded GIF. But it is OK since it is available via the earlier link you posted.

bitagoras

@Scott-Sumner

ok but I think I got your point ;-)

Probably this GIF is only visible from my IP.

PeterJones

I can see the animated gif. It may be that Scott’s connection is being filtered from seeing s2.gifyu.com – I know that my employer blocks many file-sharing sites; fortunately, imgur is not one of them (amazingly enough), so I can upload to and see embedded images from imgur, which is quite helpful here.

guy038

Hi, @bitagoras, and All,

I found out a work-around to simulate the behavior of your animated gif picture !

I suppose 3 hypotheses :

The Multi-Editing feature is enabled ( Settings > Preferences… > Editing > Multi-Editing settings )
The BetterMultiSelection plugin is installed and enabled
The Ctrl+ D shortcut is assigned to the Scintilla function SCI_SELECTION DUPLICATE ( and not to SCI_LINEDUPLICATE ! )

So, assuming this sample test, below , in a new tab :

var1, var2, object1, object2, object3, flag2, flag3

Place the cursor right before the string var1 ( without the Ctrl key pressed )
Holding down a Ctrl key, left click, right in front of all the other strings, in order to get a total of 7 cursors !

Now :

Backspace * 2
Enter

You should get a 7- lines selection, below :

var1
var2
object1
object2
object3
flag2
flag3

Note that the SP notation, below, represents a hit on the Space bar

Type obj.
Shift + End
Ctrl + D
Right
Type SP=SParg["
Shift + End
Ctrl + D
Right
Type "]SP#SPDefinitionSPofSP
Esc

You obtain the following text :

obj.var1 = arg["var1"] # Definition of var1
obj.var2 = arg["var2"] # Definition of var2
obj.object1 = arg["object1"] # Definition of object1
obj.object2 = arg["object2"] # Definition of object2
obj.object3 = arg["object3"] # Definition of object3
obj.flag2 = arg["flag2"] # Definition of flag2
obj.flag3 = arg["flag3"] # Definition of flag3

Now, regarding the second block, we start, again, with the following text :

var1, var2, object1, object2, object3, flag2, flag3

Place the cursor right before the string var1 ( without the Ctrl key pressed )
Holding down a Ctrl key, left click, right in front of all the other strings, in order to get a total of 7 cursors

Then :

Backspace * 2
Enter

Again , you’ll obtain the 7- lines selection, below :

var1
var2
object1
object2
object3
flag2
flag3

Now :

Tab
Type "
Shift + End
Ctrl + D
Right
Type ":SPobj.
End
Type ,
Esc

And… you get the expected text, with a leading tabulation :

	"var1": obj.var1,
	"var2": obj.var2,
	"object1": obj.object1,
	"object2": obj.object2,
	"object3": obj.object3,
	"flag2": obj.flag2,
	"flag3": obj.flag3,

Cheers,

guy038

cipher-1024

I don’t know HOW I missed @dali 's plugin for this long! I have to admit whenever I saw someone doing multiline work I was extremely jealous and tempted to try the VS Code waters. @guy038, what is your CTRL-D mapped to? CTRL-D is mapped to “Duplicate Current Line” for me. When I follow your instructions, I just get duplicate lines. If I try to copy and paste, the paste is just all of the selections globbed together. I can’t seem to duplicate just the selection (like it does in the gif on github). This is what I get when I follow your instructions:

	"var1": obj.,
	"var1
	"var2": obj.,
	"var2
	"object1": obj.,
	"object1
	"object2": obj.,
	"object2
	"object3": obj.,
	"object3
	"flag2": obj.,
	"flag2
	"flag3": obj.,
	"flag3