Lots of NUL characters…probably the hex dump is going to be the best you can get.

@Alan-Wynne said in Local active Variables:

it does require npp to be running with admin priviladges though…

I use NppExec daily to do similar tasks (in fact, many of the posts that mention gcc and NppExec in the same post in this Forum are my equivalent of the script you just posted), but I have never had to have Admin privileges to save or run an NppExec script.

(Though, admittedly, you might need admin privileges to install the plugin – but once you’ve installed it, you can restart Notepad++ without privileges, and the plugin works.)

But under normal usage, what you described should not require admin privileges. Possible exceptions I can think of include: 1) if the file you are compiling is protected, or (2) the directory it’s in is protected; or, (3) if it was because it wouldn’t let you save the NppExec script, then your %AppData%\Notepad++\Plugins\config\npes_saved.txt might have weird permissions.

@Alan-Kilborn Thanks!!

@PeterJones Ok, Thanks for your answer.

@PeterJones said in Missing ... menu in forum:

@Coises ,

Chat and the ⋮triple-dot menus are working for me again. How about for you?

It looks normal from here. Thanks!

Seems like OneDrive works differently as it’s much faster. I will switch to it then.

@Laurie-Stearn said in Hibernation Wakeup: UNC File Removed:

triggers a clean boot out of the S4 state, which necessitates the relaunching of N++

With this info, I already have an idea of ​​what might be going on. The clean boot means that all the N++ process data, previously saved by the hibernation process to the Windows file “C:\hiberfil.sys”, is thrown away. So no previously opened files/tabs buffers in N++ available, N++ will start from the scratch with opening its files according to its session.xml file. Unfortunately N++ is updating its session.xml file content only at its regular exit (I was once considering the session.xml update after every successful file opening, but that was rejected for good reasons), not continuously right when a file is opened. So then the N++, after its re-launch, does not have the actual info needed for the opening of all your previous N++ files…

@Laurie-Stearn said in Hibernation Wakeup: UNC File Removed:

Even in this scenario, all local files are still loaded with the relaunch

It will depend on the previous state of your session.xml file. Simple test - if every time you finish work and are about to hibernate, you first exit the N++ and then re-launch it before the Windows hibernation itself - I bet that the session.xml will contain the complete information about your session files and there will not be your described issue…

You can also use the N++ menu > File > Save Session… to always have a fresh backup for your session.

@mkupper said in Hibernation Wakeup: UNC File Removed:

nppLogNetworkDriveIssue.xml

That logging trigger is intended for something else (detection of the last write timestamps for network files), it will not help us here.

@mkupper said in "Find Next Word from Caret" or "Select and Find Next":

Sometimes a creepy person sits near you, edges closer and closer, and whispers, do you want to touch my caret?
That seems to explain Notepad++'s search functions. It does not matter if the creep is to your left or right.

You just made my night :D

https://twitter.com/Notepad_plus/status/1832921210239225984

@PeterJones

You are right.

In my use case it would be recent changed files related or not to each other. They are not changed outside Notepad++. They are something that I am focused to do, currently working or maybe some hours later. Something that I am engaged.

“so if the Green Checkmark is normal and Yellow Pencil is changed-without-saved”

I could imagine something like a flash shape.

Thank you Coises, that’s what I needed.
Colin.

@Cooly0 said in Hash error on Customize Toolbar plugin:

For x32, I never understood why/if anyone used x32 anymore

I suppose one reasonable reason would be if they had a plugin that they needed that was older and it only had a 32-bit build.

This thread is older; newer threads about scripts refer one to this site’s FAQ entry, which contains info on running a script from startup.

But, really, I could have been more explicit about what you needed to do to get it to activate upon startup, when I posted the persistent version of the script – sorry about not doing that.

I don’t see the instructions about adding the lines to startup in the original instructions above

For the record, the instructions were in the source code for the script itself, down near the end of the file.

@PeterJones Very Thanks.

@SteveRMann You likely will also want to disable the keyboard shortcuts related to folding so that you can’t accidentally fumble-finger-fold something. They still work when the folding thing is no longer visible in the left margin. You will see a horizontal line that marks the folded area.

In the shortcut mapper you filter for the word fold and will see a bunch of shortcuts in the Main menu tab in the section for the View menu.

@Sam-Marrocco ,

That’s a great idea – whether it’s a tooltip or resizable. Unfortunately, we fellow Notepad++ users in the Community don’t get to make decisions about such things. I suggest following our Feature Request FAQ to make the feature request in a place where the developer will see it and could make a decision about it. (As the FAQ says, make sure you search the existing issues – both still-open and already-closed – to make sure no one else has requested that – and upvote it if it already exists)

@Alan-Kilborn

Thank you, I didn’t know the session part, it will be useful !

Have a good day

@Sykledust said in Suggestion: make inc files not default associated with any language:

in order to allow automatic syntax highlighting one have to edit “%AppData%\Notepad++\langs.xml”, and (in my experience) this has to be re-done for every NP++ update.

In the Settings > Style Configurator, you can literally just go into the language you do want it to be, go to the User ext.: box and add it – no editing of langs.xml needed. Here’s a screenshot of adding it to the C language: e27f3429-368c-456b-a82f-59255f616620-image.png

Once you’ve hit Save & Close from the Style Configurator, then the next time you open an *.inc file in Notepad++, it will be under the new language, not Pascal, because user-extensions take priority over the default list from langs.xml. This change, like other user-defined changes, does stay chosen if you do a normal update of Notepad++, because Notepad++ updates (under normal circumstances) do not overwrite the user-edited config files.

this has to be re-done for every NP++ update.

Even if you did it in langs.xml, this is incorrect: a normal upgrade does not delete or overwrite %AppData%\Notepad++\langs.xml or other such files – so unless you deleted that file (or the whole %AppData%\Notepad++\ folder), or something else weird was going on, it would keep that choice.

(Obviously, installing on a new computer will require making the config change again, but this is true for every option in Notepad++.)

@heraldww said in How to read every line in a file edit box:

How to read every line in a file edit box

Notepad++ can open many files at once.
Now I want to traverse every line of each opened file.
What function do I need to call?
I don’t want to read files directly from the hard drive.
I need to read them from the memory interface through an API
What function should be called?

I assume you’re talking about writing a plugin or a script. I can give you a clue regarding plugins; the script logic should be similar, but I don’t know the details.

To get the contents of an active tab, use SCI_GETTEXT or SCI_GETLINE, along with other functions you’ll find described nearby in the same document to get the length of the text or the number of lines.

Notepad++ keeps one or two views open, with a Scintilla control in each view and the document of the active tab in that view loaded into the Scintilla control; the documents in the other tabs are not loaded into Scintilla controls, and to the best of my knowledge there is no way to read their contents without loading them into a Scintilla control.

You can switch active tabs, though, and thereby traverse all open files. I don’t have an example handy, but the information you need is in this Notepad++ documentation.

NPPM_GETNBOPENFILES will tell you how many files are open in each view, and NPPM_ACTIVATEDOC will activate a specific document, so that should get you most of the way there.

@Brad-Morgan luaautoindent.lua example is OnChar() so is not quite suitable for the task to reformat a whole document.

You can download CodeFormat.exe from
https://github.com/CppCXY/EmmyLuaCodeStyle/releases .
Seems only 64 bit so unsure if 32 bit is available.

win32-x64.zip is what I downloaded and tested with. CodeFormat.exe can reformat a whole document. Extract CodeFormat.exe from the zip to the plugins config directory which if installed Notepad++ is %AppData%\Notepad++\plugins\Config .

You can add this code to LuaScript’s Edit Startup Script:

npp.AddShortcut('Reformat Lua Code', '', function() local configDir = npp:GetPluginsConfigDir() local codeFormatPath = configDir .. '\\CodeFormat.exe' local filePath = npp:GetFullCurrentPath() local command = '""' .. codeFormatPath .. '" ' .. 'format -f "' .. filePath .. '" -d"' local file = io.popen(command) if file then local text = file:read('*a') file:close() if text and text ~= '' then editor:SetText(text) end end end)

Need to restart Notepad++ to see the entry named Reformat Lua Code in the menu Plugins -> LuaScript .
filePath will contain the path to the lua file. New1, New2… temporary files are not expected to work.

A test file:

t = {'a', 'b', 'c'}

Click the Reformat Lua Code entry reformats the document to:

t = { 'a', 'b', 'c' }

The change is set in the document buffer.

@Mike-0 said in Need help figuring this out.:

Also can you tell me how to do a wildcard search in Notepad ++
/*. I seem to remember it was something like this, but I rarely use wildcards these days.

You can use regular expressions. Start by reading the relevant section of the online manual and then come back if you have questions.