Peter Jones,
That is brilliant.
Thank you ever so much.
You solved a HUGE problem for me.

@PeterJones said in rayo de luz en mi monitor?:

@Eder-Bravo ,

I have seen with monitors in the past that some exact sequence of pixels (I don’t know whether it’s a horizontal or vertical sequence, or a whole rectangle) can cause flickering and other such artifacts – and not just (or maybe not even) with Notepad++. My guess is that you’re seeing something similar.

If you change the size of the Notepad++ window, and/or move it around on your screen, does the artifact stay the same, or move with the window., or go away?

Or maybe it has to do with the refresh rate on your monitor not being set optimally between Windows and your monitor, and the specific requirements of that particular screen configuration mean that the refresh causes weird artifacts.

My guess is there won’t be anything that can be done to “fix” this in Notepad++.

yes, I think that was it. I bought this monitor (144hz, but my GPU only recognizes 120hz, maybe this is what you mean by bad synchronization, my GPU does not have Freesync) a week ago, but until now I had no problem with any type of software, that’s why I found it very strange that it only happens with Notepad ++, the solution I found was to modify the pixel format to RGB limited (it was in RGB FULL) in the Radeon Software settings, (and that ray of light was no longer showing), although That lowered the brightness a little bit, but nothing bothersome. Thanks for your reply!! , I thought my monitor was damaged.

@Terry-R
thank you for your support, but my problem persists at point 3 of your help (create a specific regex)…

@guy038
thank you for your regex. wonderfull, like all your regex!

@Alan-Kilborn
your contribution is also very interesting. something that can also be useful on other occasions and not only for this specific case.
thank you for your useful information.

so, people like you who know a lot about np++ help someone like me understand many aspects still unclear about this wonderful (and complex) program.
A DUTIFUL AND HEARTFELT THANKS TO ALL THOSE WHO HAVE CONTRIBUTED TO THIS LONG POST (in the hope that it can also help other users who, like me, do not have all your knowledge about it).

@Raanan-Barzel said in Repetitive search:

Please enable F3 repeat while the Search panel is open.

F3 does NOT work when the Find window has input focus.
There, Enter (or Shift+Enter) will move between the matches.
When the main editing window has input focus, THEN F3 (or Shift+F3) works.

Sending e-mails on the Internet is no longer a trivial matter. It used to be a wild west where anyone could send e-mails using any “from” address. Spammers took advantage of this.

To cut down in the amount of incoming spam for their users many e-mail servers now inspect incoming messages and use various techniques to figure out if the e-mail is valid or is spam.

From the screen shots I see in this forum thread it appears NodeBB was created during the wild west days. Much of what they are suggesting won’t work in today’s Internet.

While @PeterJones suggested using any major provider I suspect you will run into sending limits with most of the providers. NodeBB will be firing off batches of nearly identical e-mails to many people to alert them about updates to forum threads and/or to send them daily digests. Those batches will look like spam attempts to most of the major providers which will shut you down.

I noticed that notepad-plus-plus.org has an MX record but there’s either no inbound mail server configured or it rejected my attempt to connect to it. I’ll assume the MX record is an artifact from the hosting company and that @donho did not buy the e-mail hosting part of the package.

As I noted earlier, sending e-mails on the Internet is no longer a trivial matter. Many hosting companies don’t allow their customers to run e-mail based forums as the resulting traffic can cause the hosting company’s IP network blocks to get blacklisted. I started to look into if the company that hosts the notepad-plus-plus.org web site, https://www.hostinger.fr/ , allows e-mail forums but I don’t know French. I tried viewing the hosting site via the Google translator which worked well until the site blocked me as they did not want me to view their site via another site (google’s translator).

@Gurux13 said in Location Navigate x64:

There is no license attached to the source code, which makes it problematic to redistribute.

There is no specific LICENSE.txt file, but all the code has a header that includes:

//This program is free software; you can redistribute it and/or //modify it under the terms of the GNU General Public License //as published by the Free Software Foundation; either //version 2 of the License, or (at your option) any later version.

and it’s basically modified files from the Notepad++ plugin template structure which also bear that notice. I’m not a legal expert, but I’m pretty sure you’re OK to clone the publicly available source code to your GitHub, make modifications and re-release so long as you don’t change the existing “license”.

Cheers.

@1-conscience-0-dimension ,

It could be nice to have … session manager…

Notepad++ already natively supports sessions¹: File > Save Session… and File > Load Session… allow you to save and load any session files you want.

However, one feature you mentioned was

with a menu to delete unwanted files entries

The native session handling does not allow you to pick-and-choose which tabs end up in a session file. However, the session files are XML-based, so once the session file is saved, you can open it as a text file, and delete any unwanted entries from the session file, and save the file. The next time you Load Session, it will not include the extra tabs².

There is a plugin called Session Manager that may have more features of use to you: go to the Plugins menu, Plugins Admin entry, and install Session Manager. I don’t use named sessions much, so I don’t know all the features of that plugin, but if you’re regularly using sessions, I’ve heard it’s a good improvement.

-----

Official sessions docs @ https://npp-user-manual.org/docs/session/ . As of 2020-Dec-02, the npp-user-manual.org version of the session docs is rather scant. There is an improvement coming soon, which can be viewed on github while waiting for it to be published.

Caveat: when you File > Load Session…, it will add all the tabs from the session file to the current instance of Notepad++: it doesn’t automatically close other files, so you may have to File > Close All if you only want the session’s tabs open and don’t want other tabs to stay open.

Below is a Python Script, which will change ALL occurrences of Damage to 50% of their value,:

import xml.etree.ElementTree as ET def is_float(value): try: float(value) return True except: return False root = ET.XML(editor.getText()) for damage in root.findall(".//Damage"): if damage is not None and damage.text is not None and len(damage.text) > 0 and is_float(damage.text): value = float(damage.text.strip()) * 0.5 damage.text = "{:.6f}".format(value) editor.setText(ET.tostring(root))

@cisco779k

You have asked several regex data transformation questions on the forum. Give us all some “tanxs” by putting in the effort to learn why @astrosofista 's technique worked on your data, so that in the future you can maybe solve this type of problem (a fairly simple one) without coming here for help.

Some nice resources are found HERE.

Wow ok this looks good, thank you for the pointer to the post.

many tanxs (again) for your explanation!

@guy038 said in remove duplicate urls:

Am I missing something obvious ?

I made no assumptions about the list, I just wanted to keep the order that did exist in reverse. The OP had pivoted my solution suggesting it worked for them.

Terry

Thanks! That clears things up for me. I’m a bit richer now!

@guy038 said in Poor-man's "regex favorites" in Notepad++:

Your search regex|(*F)\Q REPL:Your replacement regex

Nice, one Guy!
I’d like the original (?#...) one better, because it is more readable (once one knows that it is a “comment”), except for the problem I noted with the closing parens.
Because of that limitation, |(*F)\Q is definitely better here.

@Alan-Kilborn said in Marked text manipulation:

Copy and cut of selected text would jam all of the text together if it were on a selection basis (probably not really useful that way).

Yes, you are right. Up to now, I’ve used my script only for deleting and editing the selections. But especially being able to multi-edit all occurences of a search term or overwrite them by multi-paste vastly increases productivity.

I had a thought that it might be valuable to better state the precedence of options that I mentioned earlier. Let me give it a go, in the form of a pseudocode flowchart:

Count option rules: if "In selection" is ticked Count will be occurrences within the selected text (of a single, non-column-block) selection else if "Wrap around" is ticked Count will be occurrences within the entire document else if "Backward direction" is ticked Count will be occurrences from the start of document to the (main) caret else Count will be occurrences from the (main) caret to the end of the document

The use of “(main)” is important if you have multiple carets active at once (i.e., multi-editing enabled).
You only have one “main” caret, which is the most-recent one you created.

Hi @Terry-R

You’re right, my bad. I misread the whole thing. Hope that OP wasn’t fooled by my post.

BR

@Ekopalypse said in Perl subroutine calltips - with PythonScript:

Just to make clear, this function is not really needed.

That worked!