@Polar-Bear

The cake is fully baked, wonderful scents are coming out of the kitchen, go to other thread here as mentioned by @PeterJones in his post above:

This conversation was continued in “Deleting a group of characters in lines with same beginning and ending, but different in between (re-post)”.

@RC-Ayers ,

You’ll get more help if you try to describe your problem with a bit more detail.

Great!! Thanks! I tried searching in the forum beforehand but I had found nothing.
Works fine!

@Alan-Kilborn Putting a ^ at the beginning of every regex AND’ed sections has reallllllly fixed the complexity problem! thank you sooooo much!!

Alternate suggestion (somewhat alluded to by a previous response by Alan Kilborn):

Don’t move the vertical separator bar so that one of the views is fully obscured, leave at least one text line visible. The obscured pane is only hidden from the user, not from the editor. When a user makes the pane effectively invisible, what they are really doing is saying don’t show me the contents, so when the editor changes the contents (scrolls the file to display the match) the user can’t see what is going on.

This may not affect the purported bug, but it should at least make it easier to see what is going on. I do note that the Find All in All Opened Documents option will resize the document views to allow space for the Search results window and this may require appropriate resizing of all three panes.

@Danielle-Bray ,

I’m learning code and it cant open chrome what do I do

Um. Your question as written does not seem to have anything to do with Notepad++, which is what this forum is about.

If by this question, you mean, “I have started typing HTML using Notepad++. I would like to view the HTML I am writing in my already-installed Chrome browser on the same computer. How can I do that from Notepad++?”, then the answer is:

Save the HTML file to some known location Use Notepad++'s View > View Current File In > Chrome, and as long as you have a standard installation of Chrome, the saved file will be opened in Chrome. Now if you make changes in Notepad++, you just need to save there, Alt+Tab over to Chrome and refresh/reload the page (F5 or Ctrl+R).

On step 2, if you don’t see that menu option, then you might have an ancient Notepad++ version; in that case, a similar command might be available in the Run menu.

@ciucaandrei ,

Search-and-replace cannot randomize the list of files to search. And search-and-replace doesn’t have a counter that would work exactly like you showed (you can tell it to repeat part of the same regex N times, so it can count to some extent… but that’s counting within a single match, not counting and only doing a replacement for the first N matches). So you would have to manually pick your “random file” and then do the search/replace once in that file; then do that again N times.

The way you described it, it sounds like a programming challenge, not a text editor feature. And the purpose of this forum is to help each other use the existing features of Notepad++ to the best of its ability, not do other people’s programming for them.

If you want to solve it in programming, you could type the code to do that in Notepad++, which is one of its primary purposes. And if you wanted to, you could use one of the scripting plugins, like PythonScript, where the script would run on the files that are opened in Notepad++… but even then, it’s still essentially a programming task, and we are not a programming forum.

Hello @neil-schipper,

You quoted :

Color blindness (color vision deficiency, or CVD) affects approximately 1 in 12 men (8%) and 1 in 200 women in the world

So my proportion of 8.3 % was not correct. Giving your statement, this leads to a real proportion of 50 % × 1 ÷ 12 + 50 % × 1 ÷ 200. So the proportion of color-blind people, among the world population, is rather ≈ 4.4 %, with a clear proportion in men compared to women ( about 16 times more ! )

BR

guy038

@guy038 said in Replacing text from x to y:

So the correct regex

Confirmed. In hindsight I should’ve spotted it myself – every instance of backslash-leftbracket on this site should be treat with suspicion and caution.

Hello, @ryan-mclaughlin, @peterjones and All,

We must take care whether the ranges between "........." may or not contain comma(s), themselves !

if we consider the general case, where :

The field separator is the comma character

Some fields are surrounded by doubles quotes, containing possible commas or could be empty fields ( "")

Some fields do not contain any double-quote and could be empty too

The field to delete is the last field of each row, possibly followed with a comma

Then, the following regex S/R is the right solution, especially when the total number of fields of a row is inferior to the number of the field to delete !!

SEARCH (?-s)^(?:"[^"\r\n]*",|[^",\r\n]*,){N}\K(?:"[^"\r\n]*",?|[^",\r\n]*,?)    where N is the number of fields right before the field to delete

REPLACE Leave EMPTY

Tick preferably the Wrap around option

Click only on the Replace All button

Test it against this two-lines text :

"ClientNumber","","First,Name",123456789,"Last,Name",2021-12-31,"Gender","","Email","AddressLine1",,"1,234.56","PhoneNo","ApprovedDate",01-34-56-78,Field to delete,"ClientDischargeDate","Case Manager(EMPID)", "ClientNumber","","First,Name",123456789,"Last,Name",2021-12-31,"Gender","","Email","AddressLine1",,"1,234.56","PhoneNo","ApprovedDate",01-34-56-78,Last field to delete,

Note that field 12 ( "1,234.56" ) contains a decimal number with a comma separator => I surrounded this field with double-quotes to keep its meaning

Best Regards,

guy038

@hcchen said in Regular expression size limited 2048 chars How to make it longer?:

After all, I pop up a message box that informs user that the RegEx will be copy to clipboard, OK or Cancel? that’s all. Users can easily use the ‘Find’ dialog then

That’s a nice approach to solving your problem.
Sometimes it just takes some discussion and background thinking to get to the right conclusion.

@PeterJones

That’s run through great now, thank you. :)

Capture2.JPG

@Ariel-Eduardo-Gonzalez

Try to read the release notes when you upgrade to a new version, to get a feeling for new features and settings that have been added – it could save you time as you wouldn’t need to ask and could get back to being productive right away.

@Alan-Kilborn
Hello Alan Kilborn,
Thanks for your tips.

Best regards
Thomas

@Saya-Jujur ,

Untested, because I am on my phone, but maybe try

prev = '' with open('data.txt') as f: for (n, line) in enumerate(f): if line[:200] == prev[:200]: print n+1 prev = line[:200]

(You said you changed to 200 already, but maybe you missed an instance, or maybe comparing just the left of prev is enough)

If that doesn’t work, then follow @Terry-R’s advice

OP has continued this (albeit with some changes in request) in this post.

Terry

Hi @guy038 , I really appreciate your help. Not only resolved my problem, but also taught me something with your detailed explanation.

@Cameron-Mitchell ,

The only installer options are described https://npp-user-manual.org/docs/command-prompt/#installer-options

Unfortunately, the NSIS installer technology (which is what Notepad++ uses) doesn’t give a lot of command-line-options. And the developers of Notepad++ want to focus their attention on the application itself, not in rewriting the installer software.

Since you seem to be an admin who is installing on multiple machines, I would suggest creating your own bundle: either start with the portable/zip edition, and customize the settings, then make your own zip (or self-extracting-zip exe) which you distribute; or start with the installed version, customize the settings, and zip up install-directory + %appdata%\notepad++ and bundle into a zip or self-extracting-zip for distribution.

@Vaibhav-Sharma

This used to work properly in old versions, but not in new ones. I recommend you to fix this problem

This feature has Preference settings that have to be set “correctly” for what you need. I believe these are the defaults in 8.1.7:

bfb3ca3b-089a-463d-bdbc-a7ff9f1e51aa-image.png

Probably you want to untick the “whole word” one.

I’m having the exact same issue. Opening as admin is a workaround, but restarting the windows display subsystem using the shortcut key Win+Ctrl+Shift+B doesn’t fix it.

Windows 10.0.19043