@freezer2022 , @_ ,

I’ve put in a feature-improvement request with the NodeBB folks. They have agreed that they will fix NodeBB software so that @-mention and the automatic reply links will not count for the “links require 1 reputation” restriction.

After the updated NodeBB is released, we’ll try to get our NodeBB-instance updated so it has that fixed feature, so then hitting “reply” will work without 0-reputation users having to delete stuff that’s automatically put in the post.

Sorry for the inconvenience, but it’s a constant balance between ease of use and fighting spam links. The user experience on this aspect should improve again in the near future.

Stop trolling / Ad hominem attacks like advised here :

LINK : Please be polite and treat other Community Forum members with respect. Ad hominem attacks, personal insults, hate speech, and other such violations of this policy are grounds for immediate and permanent banning from this Forum.

My above comment was just sharing the same experiences, which is sometimes useful, as one of purposes of a forum is to share experiences between users. Not to mention I did it only one time so far, but despite it, you created a “zero value” offensive generic accusation towards all my other comments, despite most of my comments on forum and issue tracker are useful. You’re trying to discredit my person as unhelpful, you seem to be on a one-person crusade to comment on my comments and to vent out your frustration. If you want to accuse of or to prove anything, you need to analyse each of my comment separately, and provide specific argumentation of why a given comment has “Zero value”, otherwise it’s nothing more than a book example of trolling and Ad hominem attacks

As a proof several examples of my comments (not all):

As for my comment here LINK :

I already explained in my next comment here LINK
why I created the previous post in same thread and why it wasn’t a bad idea also my comment caused 2 other users to post their useful plugins

As for my comments here LINK + LINK :
it definately was not “Zero value”, actually the opposite, it was useful because :

noone mentioned this plugin before, some other suggested solutions by some other users were a bit cumbersome my comment caused one of the users to provide his updated solution my comment got an upvote

As for my comment here LINK :

I provided useful information that such feature is already implemented in 2 different plugins

As for my comment here: LINK :
it definately was not “Zero value”, actually the opposite, it was useful because :

noone mentioned 64bit version of this plugin before, which is a new thing recently released my comment got 2 upvotes also I already explained, why I posted same comment twice (previously in : LINK

As for my comment here : LINK

I provided useful information that such feature already exist in a plugin

I don’t think it’s a good place for personal / off topic attacks, most likely at any time a moderator will come and lock the thread or hide/remove personal comments (thanks to you), I think you should not act like this, please avoid creating a public drama and if you want to reply, do it via private message.

@PeterJones said in Math and Notepad++ (…)

The same reply: LINK applies here as well, I’ll leave you now guys, continue your discussion.

Some further discussion on this topic is HERE.

@Holger-Z said in winget | real autoupdater finally:

It will report the update as successful, even so it didn’t install the update properly. That happens, when Notepad++ is running while winget is trying to update Notepad++.

https://github.com/notepad-plus-plus/notepad-plus-plus/issues/10277#issuecomment-887779544

I will see what I can do about it, I am adding a fix of the silent installer mode (/S), when the Notepad++ is already running, to my TODO-list.

51bfa20d-0f12-49aa-92cd-a968e63097e2-image.png

Okay, now it is.
The translation that Google is giving me was not very clear.

What I was doing, is dragging the tab, instead of clicking with the mouse button.

Thank you very much.

@guy038 said in Automatic selection of ALL instances of a searched string, in one go:

So, here is my updated script, that I called Automatic_Selections_AK.py

Oh no, the script should fully be called Automatic_Selections_GT.py ! :-)

Thank you for explanation
Sublime has a good solution showing project name in title bar, but there are some futures in notepad++ that I like to use. I guess sublime spoiled me.

@joe-junior said in Mark All or Mark Selected Words:

How can I get that done?

There are a few ways of highlighting the required character strings. It will depend on what you ultimately intend to do with the highlighted text.

Use Mark function (Search, Mark). You can set the search mode as normal and type in each string (one at a time) and hit the “Mark All” button, repeat for each string. At the end all of the strings wanted will be highlighted.

Again using the Mark function but this time the search mode is “regular expression”. The Find What window will be HD|SD|12|#\+. Note that in this case as the + character is a meta-character (means something other than the character it is) I had to “escape” (\) it so that the regular expression engine will look for the plus sign rather than it’s normal meaning of “as many of the previous character together”. The | character is a separator character. it means this or that (Alternation, OR operand). So the regular expression engine can look for each string as a separate search simultaneously. Also if you only want the exact character (such as H, not h) then also click on the “Match Case” button.

If you were wanting to remove (or copy) the lines containing the strings you would still use option #1 or #2 above, but also tick the “bookmark line”. Once the search has completed the left margin will contain a blue icon (sphere, circle) for lines containing the strings you seek. Right click over one of these and you will see options to copy, remove, cut (and then paste into another tab).

If these do not benefit you, you will need to expand on your requirement. You should also consider reading the pinned post in the “General Discussion” called “Please Read This Before Posting” as it will help you include examples in the correct manner and also suggest other links in this forum to read.

Terry

@Bas-de-Reuver Notepad++'s regular expression search/replace has a couple of things that you and others may find useful.

\R matches any style of newline such as CR, LF, and CRLF. While \R does not work in the replacement part it’s still useful.

You can remove blank lines using ^\R+
You can remove spurious blank lines using ^\R\K\R+
The \K says to keep everything to the left meaning it will keep one blank line while removing spurious blank lines.

In both cases it’s a regular expression search/replace with the replace part being nothing or blank. This also means we don’t care about the current end of line format as \R matches any of them and \K ends up keeping whatever end-of-line style is in use.

It’s not clear from the OP’s example if they desired to remove the blank lines and then sort the resulting list or if they desired to have some sort of combining, merging, or interleaving of the lines that may or may not be sorted. As the OP then wanted to delete the thread it will likely forever remain a mystery.

It is possible and has been found successfully.

maybe it’s true, I searched for too much text, and had a typo or extra space in file or something.

But this has worked
Thank you for your help in helping me with the details

@Chuck-Roberts

If you have the Better Multiselection plugin installed and enabled…

If you create a “column caret” (hold Shift+Alt while using arrow keys) before invoking the Column Editor, like this:

3160e7fb-181c-4ecd-9ba9-e905a3d6bb03-image.png

Then, after Column Editor does its work:

c6cbd864-cca7-4bd0-94b2-208dde6f7908-image.png

arrow to the right one time:

e938dcee-bc58-4793-a765-2a45347d66de-image.png

Then press period and space:

2a923793-eb8f-4843-ae41-f00bd7d7031d-image.png

@Mark-Olson said:

I’m pretty sure that AlanKilborn recently authored at least one PR that improved the incrementing number feature in the column editor

It is true, see HERE, but it would not have any impact on what @Chuck-Roberts needs to do here.

@Gordon-Gordonplex said in Make indentation and cursor position like other tsxt editors:

know what setting should be changed and what it should be set to to fix it

It’s not a problem, it’s a feature. Just a feature that doesn’t currently help you. Which is why “there are so many settings”

The Settings > Preferences > Auto-Completion > ☑ Auto-Indent checkbox controls this. It defaults on, and it sounds like you want it off.

There are so many settings (both Preferences and Style Configurator) that I can’t figure out which one might help

Did you try going to the preferences page in the User Manual and search for the word indent? There are exactly 9 matches right now, one third of which are talking about the setting you need. It would have taken less than 5 minutes of your time to follow the ?-menu’s Notepad++ Online User Manual link, then see that there’s a page on preferences, then search for indent and read the three sections that show up – and you would have had your answer in the second of those three sections.

I think it thinks I’m writing Fortran or something.

Does it say “Fortran” or similar on the lower-left of your Status Bar?
a55bb9fb-dc1f-4ac0-8865-f72e1faefdbc-image.png
Or if your Status Bar is hidden, or too narrow to show the language name, what does the Language menu indicate?
Or did you just say “Fortran” because you assumed it must be treating it as some sort of programming language, and “Fortran” is the first that came to your mind. (BTW: congratulations if “Fortran” is the first programming language that comes to your mind; most people would have said “Python” or some plebian “modern” language, not something as noble as “Fortran”. :-) )

If your text files have non .txt extensions, it might be an extension that Notepad++ associates with another language. If that’s the case, let us know, and we can explain how to get that extension to automatically be Normal Text instead of Fortran (or whatever it actually is).

@Robert-Maarschalkerweerd ,

Notepad++ batch is no longer showing up on the language pulldown

Most likely, either your langs.xml has been corrupted (and given your text file about is talking about editing langs.xml, that is highly likely), or you have used Settings > Preferences > Language and moved Batch into Disabled Items, like:
7057f840-8606-4a9c-a25c-6036987a3dc1-image.png

If the latter is the case, click on Batch in that list, then click the <– button to put it back into your Language Menu

@Mark-Olson Thank you! The plugin does indeed accomplish what I needed, although in a bit other way than I thought.

@PeterJones said in difference between file => save as and save a copy as.:

because I wanted to save the current state of the file as a backup under a new name

That’s about the only useful use for it.
The way I use it more often though, is to keep working with both files.
Thus, it becomes a multistep procedure for me. I have to Save a Copy As, and then File > Open the other file.
This annoyed me so much at one point that I wrote a script (or someone else did and I just started using it) that does it in one step.